MyPHPblog for Industrial Electronics Corp.

Go to Home page or Back to where you were, or VIEW blog.

05/10/2003 at 5:42PM by Randy

	Domestic STA Domestic STA Domestic power source Wall Plug-in/Desktop Input for All Domestic Models is 120 Volts A.C., 60 Hz. STANCOR DIMENSIONS Output PlugÆ PART Rated Output Regulated/ Length Width Height Weight 2.1x5.5mm AgencyS SEC. NUMBER Volts AC/DC mA Unregulated Case Style Size (inches) (mm) (inches) (mm) (inches) (mm) (lbs.) Inside Polarity Certification A STA-4125T 2.5 DC 500 Unregulated Wall Plug-in 2 2.5 63.0 2.0 51.0 1.6 41.0 0.47 Negative UL/CSA STA-4130 3.0 DC 350 Regulated Wall Plug-in 2 2.5 63.0 2.0 51.0 1.6 41.0 0.48 Negative UL STA-3530A 3.0 DC 400 Unregulated Wall Plug-in 1 2.2 55.0 1.8 44.6 1.5 37.2 0.35 Negative UL/CSA STA-3530 3.0 DC 500 Unregulated Wall Plug-in 1 2.2 55.0 1.8 44.6 1.5 37.2 0.37 Negative UL/CSA B STA-3540 4.4 DC 400 Unregulated Wall Plug-in 1 2.2 55.0 1.8 44.6 1.5 37.2 0.35 Negative UL/CSA STA-3545B 4.5 AC 300 Unregulated Wall Plug-in 1 2.2 55.0 1.8 44.6 1.5 37.2 0.34 - UL/CSA STA-4850 5.0 DC 600 Regulated Wall Plug-in 9 3.5 89.0 2.4 61.0 1.9 47.0 0.90 Negative UL/CSA STA-3560B 6.0 DC 100 Unregulated Wall Plug-in 1 2.2 55.0 1.8 44.6 1.5 37.2 0.35 Negative UL/CSA C STA-3560 6.0 DC 200 Unregulated Wall Plug-in 1 2.2 55.0 1.8 44.6 1.5 37.2 0.35 Negative UL/CSA STA-3560A 6.0 DC 300 Unregulated Wall Plug-in 1 2.2 55.0 1.8 44.6 1.5 37.2 0.35 Negative UL/CSA STA-4160 6.0 DC 600 Unregulated Wall Plug-in 2 2.5 63.0 2.0 51.0 1.6 41.0 0.47 Negative UL/CSA STA-4160A 6.0 DC 800 Unregulated Wall Plug-in 2 2.5 63.0 2.0 51.0 1.6 41.0 0.56 Negative UL/CSA D STA-4860 6.0 DC 1000 Unregulated Wall Plug-in 3 2.8 70.5 2.3 57.0 1.8 44.6 0.84 Negative UL/CSA STA-4860-4 6.0 DC 1000 Unregulated Wall Plug-in 3 2.8 70.5 2.3 57.0 1.8 44.6 0.84 Positive UL/CSA STA-4860A 6.0 DC 1200 Unregulated Wall Plug-in 3 2.8 70.5 2.3 57.0 1.8 44.6 0.90 Negative UL/CSA STA-5760 6.0 DC 2000 Unregulated Wall Plug-in 4 3.4 86.1 2.6 66.5 2.2 55.0 1.50 Negative UL/CSA E STA-5760A 6.0 AC 3300 Unregulated Desk-Top 4 3.4 86.1 2.6 66.5 2.2 55.0 1.67 - UL STA-3575 7.5 DC 100 Unregulated Wall Plug-in 1 2.2 55.0 1.8 44.6 1.5 37.2 0.34 Negative UL/CSA STA-3575A 7.5 DC 300 Unregulated Wall Plug-in 1 2.2 55.0 1.8 44.6 1.5 37.2 0.36 Negative UL/CSA STA-4875 7.5 DC 1000 Unregulated Wall Plug-in 3 2.8 70.5 2.3 57.0 1.8 44.6 0.84 Negative UL/CSA F STA-4875-4 7.5 DC 1000 Unregulated Wall Plug-in 3 2.8 70.5 2.3 57.0 1.8 44.6 0.84 Positive UL/CSA STA-5775 7.5 DC 1500 Unregulated Wall Plug-in 4 3.4 86.1 2.6 66.5 2.2 55.0 1.43 Negative UL/CSA STA-4175A 7.5 DC 500 Unregulated Wall Plug-in 2 2.5 63.0 2.0 51.0 1.6 41.0 0.50 Negative UL/CSA 9.0 DC 300 STA-3590B 9.0 DC 100 Unregulated Wall Plug-in 1 2.2 55.0 1.8 44.6 1.5 37.2 0.35 Negative UL/CSA G STA-3590 9.0 DC 200 Unregulated Wall Plug-in 1 2.2 55.0 1.8 44.6 1.5 37.2 0.35 Negative UL/CSA STA-4190C 9.0 DC 200 Regulated Wall Plug-in 2 2.5 63.0 2.0 51.0 1.6 41.0 0.48 Negative UL STA-3590A 9.0 DC 300 Unregulated Wall Plug-in 1 2.2 55.0 1.8 44.6 1.5 37.2 0.35 Negative UL/CSA STA-4190B 9.0 AC 300 Unregulated Wall Plug-in 2 2.5 63.0 2.0 51.0 1.6 41.0 0.47 - UL/CSA H STA-4890B 9.0 DC 400 Regulated Wall Plug-in 9 3.5 89.0 2.4 61.0 1.9 47.0 0.90 Negative UL/CSA STA-4190A 9.0 DC 500 Unregulated Wall Plug-in 2 2.5 63.0 2.0 51.0 1.6 41.0 0.56 Negative UL/CSA STA-4190D 9.0 AC 500 Unregulated Wall Plug-in 2 2.5 63.0 2.0 51.0 1.6 41.0 0.45 - UL/CSA STA-4190F 9.0 DC 700 Unregulated Wall Plug-in 2 2.5 63.0 2.0 51.0 1.6 41.0 0.62 Negative UL/CSA I STA-4890 9.0 DC 1000 Unregulated Wall Plug-in 3 2.8 70.5 2.3 57.0 1.8 44.6 1.00 Negative UL/CSA STA-4890A 9.0 DC 1200 Unregulated Wall Plug-in 3 2.8 70.5 2.3 57.0 1.8 44.6 1.03 Negative UL/CSA STA-4890A-4 9.0 DC 1200 Unregulated Wall Plug-in 3 2.8 70.5 2.3 57.0 1.8 44.6 1.03 Positive UL/CSA STA-6690 9.0 DC 3000 Unregulated Desk-Top 7 4.8 121.1 3.1 80.0 2.5 64.5 2.44 Negative UL/CSA STA-5790 9.0 AC 3400 Unregulated Desk-Top 4 3.4 86.1 2.6 66.5 2.2 55.0 1.84 - UL/CSA Æ Compatible for use with Switchcraft 722A or PC-722A S Agency Certification Note: U.L. 1310 Listed CSA Certified 13 D O M E S T I C P O W E R S O U R C E S STANCOR DIMENSIONS Output PlugÆ PART Rated Output Regulated/ Length Width Height Weight 2.1x5.5mm AgencyS SEC. NUMBER Volts AC/DC mA Unregulated Case Style Size (inches) (mm) (inches) (mm) (inches) (mm) (lbs.) Inside Polarity Certification A STA-4110A 10.0 DC 300 Regulated Wall Plug-in 2 2.5 63.0 2.0 51.0 1.6 41.0 0.57 Negative UL/CSA STA-4110 10.0 AC 700 Unregulated Wall Plug-in 2 2.5 63.0 2.0 51.0 1.6 41.0 0.55 - UL/CSA STA-3512 12.0 DC 50 Unregulated Wall Plug-in 1 2.2 55.0 1.8 44.6 1.5 37.2 0.35 Negative UL/CSA STA-3512C 12.0 DC 100 Unregulated Wall Plug-in 1 2.2 55.0 1.8 44.6 1.5 37.2 0.35 Negative UL/CSA B STA-3512E 12.0 AC 100 Unregulated Wall Plug-in 1 2.2 55.0 1.8 44.6 1.5 37.2 0.35 - UL STA-300R 12.0 DC 200 Regulated Wall Plug-in 2 2.5 63.0 2.0 51.0 1.6 41.0 0.50 Negative UL/CSA STA-3512B 12.0 DC 200 Unregulated Wall Plug-in 1 2.2 55.0 1.8 44.6 1.5 37.2 0.35 Negative UL/CSA STA-3512F 12.0 AC 200 Unregulated Wall Plug-in 1 2.2 55.0 1.8 44.6 1.5 37.2 0.35 - UL C STA-4112B 12.0 DC 300 Unregulated Wall Plug-in 2 2.5 63.0 2.0 51.0 1.6 41.0 0.50 Negative UL/CSA STA-4112 12.0 DC 400 Unregulated Wall Plug-in 2 2.5 63.0 2.0 51.0 1.6 41.0 0.49 Negative UL/CSA STA-4112A 12.0 AC 500 Unregulated Wall Plug-in 2 2.5 63.0 2.0 51.0 1.6 41.0 0.49 - UL/CSA STA-4112C 12.0 DC 500 Unregulated Wall Plug-in 2 2.5 63.0 2.0 51.0 1.6 41.0 0.62 Negative UL/CSA D STA-4812D 12.0 DC 600 Unregulated Wall Plug-in 3 2.8 70.5 2.3 57.0 1.8 44.6 0.84 Negative UL/CSA STA-4812B 12.0 AC 850 Unregulated Wall Plug-in 3 2.8 70.5 2.3 57.0 1.8 44.6 0.83 - UL STA-4812A 12.0 DC 1000 Unregulated Wall Plug-in 3 2.8 70.5 2.3 57.0 1.8 44.6 1.00 Negative UL/CSA STA-4812A-4 12.0 DC 1000 Unregulated Wall Plug-in 3 2.8 70.5 2.3 57.0 1.8 44.6 1.00 Positive UL/CSA E STA-5712 12.0 DC 1200 Unregulated Wall Plug-in 4 3.4 86.1 2.6 66.5 2.2 55.0 1.46 Negative UL/CSA STA-5712-4 12.0 DC 1200 Unregulated Wall Plug-in 4 3.4 86.1 2.6 66.5 2.2 55.0 1.46 Positive UL/CSA STA-6612 12.0 DC 2000 Unregulated Desk-Top 7 4.8 121.1 3.1 80.0 2.5 64.5 2.46 Negative UL/CSA STA-6612A 12.0 DC 2500 Unregulated Desk-Top 7 4.8 121.1 3.1 80.0 2.5 64.5 2.74 Negative UL/CSA F STA-6612B 12.0 DC 3000 Unregulated Desk-Top 7 4.8 121.1 3.1 80.0 2.5 64.5 2.80 Negative UL/CSA STA-4812 12.5 DC 800 Unregulated Wall Plug-in 3 2.8 70.5 2.3 57.0 1.8 44.6 0.84 Negative UL/CSA STA-5713 13.5 DC 1300 Unregulated Wall Plug-in 4 3.4 86.1 2.6 66.5 2.2 55.0 1.43 Negative UL/CSA STA-5713A 13.5 DC 1700 Unregulated Wall Plug-in 4 3.4 86.1 2.6 66.5 2.2 55.0 1.66 Negative UL/CSA G STA-5713AC 13.5 DC 1700 Unregulated Desk-Top 4 3.4 86.1 2.6 66.5 2.2 55.0 1.85 Negative UL/CSA STA-6013A 13.5 DC 2100 Unregulated Desk-Top 5 3.8 95.6 2.8 72.0 2.3 57.0 2.20 Negative UL/CSA STA-6613 13.5 DC 2400 Unregulated Desk-Top 7 4.8 121.1 3.1 80.0 2.5 64.5 2.74 Negative UL/CSA STA-4814 14.5 DC 800 Unregulated Wall Plug-in 3 2.8 70.5 2.3 57.0 1.8 44.6 0.85 Negative UL/CSA STA-4815 15.0 DC 600 Unregulated Wall Plug-in 3 2.8 70.5 2.3 57.0 1.8 44.6 0.85 Negative UL/CSA H STA-5715 15.0 DC 1000 Unregulated Wall Plug-in 4 3.4 86.1 2.6 66.5 2.2 55.0 1.50 Negative UL/CSA STA-5715-4 15.0 DC 1000 Unregulated Wall Plug-in 4 3.4 86.1 2.6 66.5 2.2 55.0 1.50 Positive UL/CSA STA-6615 15.0 DC 2000 Unregulated Desk-Top 7 4.8 121.1 3.1 80.0 2.5 64.5 2.75 Negative UL/CSA STA-4116 16.0 AC 250 Unregulated Wall Plug-in 2 2.5 63.0 2.0 51.0 1.6 41.0 0.49 - UL/CSA STA-4118 18.0 AC 300 Unregulated Wall Plug-in 2 2.5 63.0 2.0 51.0 1.6 41.0 0.48 - UL I STA-6618 18.0 DC 2000 Unregulated Desk-Top 7 4.8 121.1 3.1 80.0 2.5 64.5 2.74 Negative UL/CSA STA-6618-4 18.0 DC 2000 Unregulated Desk-Top 7 4.8 121.1 3.1 80.0 2.5 64.5 2.74 Positive UL/CSA STA-3518 18.5 DC 80 Unregulated Wall Plug-in 1 2.2 55.0 1.8 44.6 1.5 37.2 0.35 Negative UL/CSA STA-4120 20.0 DC 280 Unregulated Wall Plug-in 2 2.5 63.0 2.0 51.0 1.6 41.0 0.55 Negative UL/CSA STA-4820 20.0 AC 700 Unregulated Wall Plug-in 3 2.8 70.5 2.3 57.0 1.8 44.6 1.00 - UL Domestic STA Domestic STA Wall Plug-in/Desktop Domestic power source part numbers Input for All Domestic Models is 120 Volts A.C., 60 Hz. Æ Compatible for use with Switchcraft 722A or PC-722A S Agency Certification Note: U.L. 1310 Listed CSA Certified D O M E S T I C P O W E R S O U R C E S Domestic STA Domestic STA Wall Plug-in/Desktop Input for All Domestic Models is 120 Volts A.C., 60 Hz. STANCOR DIMENSIONS Output PlugÆ PART Rated Output Regulated/ Length Width Height Weight 2.1x5.5mm AgencyS SEC. NUMBER Volts AC/DC mA Unregulated Case Style Size (inches) (mm) (inches) (mm) (inches) (mm) (lbs.) Inside Polarity Certification A STA-3524 24.0 DC 50 Unregulated Wall Plug-in 1 2.2 55.0 1.8 44.6 1.5 37.2 0.35 Negative UL/CSA STA-4124 24.0 AC 300 Unregulated Wall Plug-in 2 2.5 63.0 2.0 51.0 1.6 41.0 0.55 - UL/CSA STA-4824B 24.0 AC 450 Unregulated Wall Plug-in 3 2.8 70.5 2.2 56.0 1.8 44.6 0.86 - UL/CSA B STA-4824AT 24.0 DC 600 Unregulated Wall Plug-in 9 3.5 89.0 2.4 61.0 1.9 47.0 1.15 Negative UL/CSA STA-5724AT 24.0 DC 1000 Unregulated Wall Plug-in 4 3.4 86.1 2.6 66.5 2.2 55.0 1.57 Negative UL/CSA STA-5724AT-4 24.0 DC 1000 Unregulated Wall Plug-in 4 3.4 86.1 2.6 66.5 2.2 55.0 1.57 Positive UL/CSA STA-6624 24.0 DC 1500 Unregulated Desk-Top 7 4.8 121.1 3.1 80.0 2.5 64.5 2.77 Negative UL/CSA For outline drawings refer to page 16. Æ Compatible for use with Switchcraft 722A or PC-722A S Agency Certification Note: U.L. 1310 Listed CSA Certified Desk-Top Regulated Series STANCOR DIMENSIONS Output PART Rated Output Regulated/ Length Width Height Weight Connector AgencyS SEC. NUMBER Volts AC/DC mA Unregulated Case Style Size (inches) (mm) (inches) (mm) (inches) (mm) (lbs.) Diagram Certification C STAR-9001 +5 DC 1000 Regulated Desk-top 7 4.8 121.1 3.1 80.0 2.5 64.5 2.20 Fig. 1 UL STAR-9002 +5 DC 1500 Regulated Desk-top 7 4.8 121.1 3.1 80.0 2.5 64.5 2.25 Fig. 1 UL STAR-9003 +12 DC 1000 Regulated Desk-top 7 4.8 121.1 3.1 80.0 2.5 64.5 2.20 Fig. 2 UL STAR-9004 +12 DC 1200 Regulated Desk-top 7 4.8 121.1 3.1 80.0 2.5 64.5 2.25 Fig. 2 UL STAR-9005 +5 DC 800 Regulated Desk-top 7 4.8 121.1 3.1 80.0 2.5 64.5 2.45 Fig. 3 UL +12 DC 200 Regulated -12 DC 200 Regulated STAR-9006 +5 DC 1000 Regulated Desk-top 7 4.8 121.1 3.1 80.0 2.5 64.5 2.45 Fig. 3 UL +12 DC 200 Regulated -12 DC 200 Regulated STAR-9007 +5 DC 1000 Regulated Desk-top 7 4.8 121.1 3.1 80.0 2.5 64.5 2.47 Fig. 3 UL +12 DC 300 Regulated -12 DC 300 Regulated S Agency Certification Note: U.L. 1310 Listed (File #E104603) or U.L. 1012 Listed (File #E112433) Fig. 1 Fig. 2 Fig. 3 STAR Series Specifications • Input Voltage: 120V +10% 60HZ • Combined Regulation: +5% • Output Ripple: 50m V MAX (Peak to Peak) • Operating Temperature: -10° to +40° C • Dielectric Test: 1500 VAC, RMS • Short Circuit and Thermal Protected STAR Series Features • Single and Multiple Outputs • Input and Output Cords 6’ Long • Rated For Continuous Duty • Grounded Input Plug (3 Prong) Output Connector Diagrams 5 Pin DIN To order these products, contact Industrial Electronics By Ross LLC 414-327-1555 www.industrialelectronics.biz

	[comments?][Karma: 2 ( + / - )][Link] to comments

Stancor Transformer Quick Selector Guide 05/10/2003 at 5:39PM by Randy

106
White-Rodgers • Emerson Electric Co.
9797 Reavis Road • St. Louis, MO 63123
(314) 865-8799 • Fax (314) 638-2400
Output Output Input Output Catalog Section (transformer type) C.T. STANCOR Pg. Sec.
Voltage Amps Voltage (AC) AC/DC Part No.
-12.00 0.200 120 DC Power Sources (Desk-Top) STAR-9005 15 C
-12.00 0.200 120 DC Power Sources (Desk-Top) STAR-9006 15 C
-12.00 0.300 120 DC Power Sources (Desk-Top) STAR-9007 15 C
1.25 5.000 117 AC Power Transformers P-6133 47 A
1.25 10.000 117/107 AC Power Transformers P-6454 47 A
2.50 0.500 120 DC Power Sources (Wall Plug-In) STA-4125T 13 A
2.50 1.000 117 AC Power Transformers P-8629 47 A
2.50 1.500 117 AC Power Transformers P-4026 47 A
2.50 3.000 117 AC Power Transformers P-6467 47 B
2.50 5.000 117 AC Power Transformers * P-6133 47 A
2.50 10.000 117 AC Power Transformers P-6135 47 B
2.50 10.000 117/107 AC Power Transformers * P-6454 47 A
2.90 0.320 230/50HZ AC Power Sources (Wall Plug-In) STAF-1433F 17 A
3.00 0.120 230/50HZ AC Power Sources (Wall Plug-In) STAF-2099F 17 A
3.00 0.350 120 DC Power Sources (Wall Plug-In) STA-4130 13 A
3.00 0.400 120 DC Power Sources (Wall Plug-In) STA-3530A 13 A
3.00 0.500 120 DC Power Sources (Wall Plug-In) STA-3530 13 A
3.15 0.300 117 AC Power Transformers P-8385 47 B
3.15 0.600 117 AC Power Transformers P-6465 47 B
3.15 0.600 230 AC Power Transformers P-8705 47 C
3.15 1.200 117 AC Power Transformers P-6134 47 C
3.15 3.000 117 AC Power Transformers P-6466 47 D
3.15 4.000 117 AC Power Transformers P-8648 47 D
3.15 5.000 117 AC Power Transformers P-8649 47 D
3.15 6.000 117 AC Power Transformers P-3064 47 D
3.15 6.000 117/107 AC Power Transformers P-6456 47 E
3.15 8.000 117 AC Power Transformers P-8651 47 E
3.15 10.000 117 AC Power Transformers P-6464 47 E
3.15 10.000 117/107 AC Power Transformers P-6308 47 E
3.15 20.000 117/107 AC Power Transformers P-6309 47 F
3.75 4.000 117 AC Power Transformers P-5015 47 F
3.75 8.000 117 AC Power Transformers P-6138 47 F
4.00 0.188 115 AC Printed Circuit Transformers (Plug-In Series) PPC-1 33 A
4.00 0.376 115 AC Printed Circuit Transformers (Plug-In Series) PPC-1 33 A
4.00 0.562 115 AC Printed Circuit Transformers (Plug-In Series) PPC-11 33 B
4.00 1.130 115 AC Printed Circuit Transformers (Plug-In Series) PPC-11 33 B
4.40 0.400 120 DC Power Sources (Wall Plug-In) STA-3540 13 B
4.50 0.120 230/50HZ AC Power Sources (Wall Plug-In) STAF-0418F 17 A
4.50 0.300 120 AC Power Sources (Wall Plug-In) STA-3545B 13 B
4.50 0.350 230/50HZ DC Power Sources (Wall Plug-In) STAF-3924F 17 A
4.80 0.500 230/50HZ DC Power Sources (Wall Plug-In) STAF-1847F 17 A
5.00 0.110 115 AC Printed Circuit Transformers SW-210 29 A
5.00 0.110 115/230 AC Printed Circuit Transformers DSW-210 29 A
5.00 0.120 115/230 AC Printed Circuit Transformers LB-610 27 B
5.00 0.200 115/230 AC Printed Circuit Transformers LB-210 27 A
5.00 0.220 115 AC Printed Circuit Transformers SW-210 29 A
5.00 0.220 115/230 AC Printed Circuit Transformers DSW-210 29 A
5.00 0.250 115 AC Printed Circuit Transformers SW-310 29 A
5.00 0.250 115/230 AC Printed Circuit Transformers DSW-310 29 A
Transformer and Power Supplies
Q U I C K S E L E C T I O N G U I D E
White-Rodgers • Emerson Electric Co.
9797 Reavis Road • St. Louis, MO 63123
(314) 865-8799 • Fax (314) 638-2400 107
Transformer and Power Supplies
Output Output Input Output Catalog Section (transformer type) C.T. STANCOR Pg. Sec.
Voltage Amps Voltage (AC) AC/DC Part No.
5.00 0.300 115/230 AC Printed Circuit Transformers LB-310 27 A
5.00 0.400 115/230 AC Printed Circuit Transformers LB-210 27 A
5.00 0.400 115/230 AC Printed Circuit Transformers LB-410 27 A
5.00 0.500 115 AC Printed Circuit Transformers SW-310 29 A
5.00 0.500 115/230 AC Printed Circuit Transformers LB-510 27 A
5.00 0.500 115/230 AC Printed Circuit Transformers DSW-310 29 A
5.00 0.500 115/230 AC TransGlobal International (PC Mount) TG2H-10 23 A
5.00 0.600 115 AC Printed Circuit Transformers SW-410 29 A
5.00 0.600 115/230 AC Printed Circuit Transformers LB-310 27 A
5.00 0.600 115/230 AC Printed Circuit Transformers LB-610 27 B
5.00 0.600 115/230 AC Printed Circuit Transformers DSW-410 29 A
5.00 0.600 120 DC Power Sources (Wall Plug-In) STA-4850 13 B
5.00 0.800 115/230 AC Printed Circuit Transformers LB-410 27 A
5.00 0.800 120 DC Power Sources (Desk-Top) STAR-9005 15 C
5.00 1.000 115/230 AC Printed Circuit Transformers LB-510 27 A
5.00 1.000 115/230 AC TransGlobal International (PC Mount) TG05-10 23 A
5.00 1.000 117 AC Power Transformers P-8652 47 F
5.00 1.000 120 DC Power Sources (Desk-Top) STAR-9001 15 C
5.00 1.000 120 DC Power Sources (Desk-Top) STAR-9006 15 C
5.00 1.000 120 DC Power Sources (Desk-Top) STAR-9007 15 C
5.00 1.200 115 AC Printed Circuit Transformers SW-410 29 A
5.00 1.200 115 AC Printed Circuit Transformers SW-510 29 A
5.00 1.200 115/230 AC Printed Circuit Transformers LB-1210 27 B
5.00 1.200 115/230 AC Printed Circuit Transformers DSW-410 29 A
5.00 1.200 115/230 AC Printed Circuit Transformers DSW-510 29 A
5.00 1.500 120 DC Power Sources (Desk-Top) STAR-9002 15 C
5.00 2.000 115 AC Printed Circuit Transformers SW-610 29 A
5.00 2.000 115/230 AC Printed Circuit Transformers DSW-610 29 A
5.00 2.000 115/230 AC TransGlobal International (PC Mount) TG10-10 23 A
5.00 2.000 117 AC Power Transformers P-8653 47 G
5.00 2.400 115 AC Printed Circuit Transformers SW-510 29 A
5.00 2.400 115/230 AC Printed Circuit Transformers LB-1210 27 B
5.00 2.400 115/230 AC Printed Circuit Transformers DSW-510 29 A
5.00 3.000 117 AC Power Transformers * P-6467 47 B
5.00 3.000 117 AC Power Transformers P-8380 47 G
5.00 4.000 115 AC Printed Circuit Transformers SW-610 29 A
5.00 4.000 115/230 AC Printed Circuit Transformers DSW-610 29 A
5.00 4.000 115/230 AC TransGlobal International (PC Mount) TG20-10 23 A
5.00 4.000 117 AC Power Transformers P-5016 47 G
5.00 4.000 117 AC Power Transformers P-8654 47 G
5.00 5.000 115/230 AC TransGlobal International (Chassis Mount) TGC25-10 21 A
5.00 5.000 117/107 AC Power Transformers P-6458 47 G
5.00 6.000 115/230 AC TransGlobal International (PC Mount) TG30-10 23 A
5.00 6.000 117 AC Power Transformers P-8655 48 A
5.00 8.000 117 AC Power Transformers P-8656 48 A
5.00 8.600 115/230 AC TransGlobal International (Chassis Mount) TGC43-10 21 A
5.00 10.000 117 AC Power Transformers * P-6135 47 B
5.00 10.000 117 AC Power Transformers P-6461 48 A
5.00 11.200 115/230 AC TransGlobal International (PC Mount) TG56-10 23 A
108
Q U I C K S E L E C T I O N G U I D E
White-Rodgers • Emerson Electric Co.
9797 Reavis Road • St. Louis, MO 63123
(314) 865-8799 • Fax (314) 638-2400
Output Output Input Output Catalog Section (transformer type) C.T. STANCOR Pg. Sec.
Voltage Amps Voltage (AC) AC/DC Part No.
5.00 16.000 115/230 AC TransGlobal International (Chassis Mount) TGC80-10 21 A
5.00 26.000 115/230 AC TransGlobal International (Chassis Mount) TGC130-10 21 A
5.00 35.000 115/230 AC TransGlobal International (Chassis Mount) TGC175-10 21 A
5.20 1.000 230/50HZ DC Power Sources (Wall Plug-In) STAF-1848F 17 B
6.00 0.100 120 DC Power Sources (Wall Plug-In) STA-3560B 13 B
6.00 0.200 120 DC Power Sources (Wall Plug-In) STA-3560 13 C
6.00 0.300 120 DC Power Sources (Wall Plug-In) STA-3560A 13 C
6.00 0.330 115/230 AC Printed Circuit Transformers LB-412 27 B
6.00 0.417 115/230 AC Printed Circuit Transformers LB-512 27 B
6.00 0.500 230/50HZ DC Power Sources (Wall Plug-In) STAF-0381F 17 B
6.00 0.600 120 DC Power Sources (Wall Plug-In) STA-4160 13 C
6.00 0.667 115/230 AC Printed Circuit Transformers LB-412 27 B
6.00 0.800 120 DC Power Sources (Wall Plug-In) STA-4160A 13 C
6.00 0.833 115/230 AC Printed Circuit Transformers LB-512 27 B
6.00 1.000 115/230 AC Power Transformers (Dual Pri./Sec.) P-6375 52 C
6.00 1.000 120 DC Power Sources (Wall Plug-In) STA-4860 13 D
6.00 1.000 120 DC Power Sources (Wall Plug-In) STA-4860-4 13 D
6.00 1.000 230/50HZ DC Power Sources (Wall Plug-In) STAF-0797F 17 B
6.00 1.200 120 DC Power Sources (Wall Plug-In) STA-4860A 13 D
6.00 2.000 115/230 AC Power Transformers (Dual Pri./Sec.) P-6375 52 C
6.00 2.000 115/230 AC Power Transformers (Dual Pri./Sec.) P-6376 52 C
6.00 2.000 120 DC Power Sources (Wall Plug-In) STA-5760 13 D
6.00 3.300 120 AC Power Sources (Desk-Top) STA-5760A 13 E
6.00 4.000 115/230 AC Power Transformers (Dual Pri./Sec.) P-6376 52 C
6.20 0.300 230/50HZ DC Power Sources (Wall Plug-In) STAF-2100F 17 B
6.20 0.350 230/50HZ DC Power Sources (Wall Plug-In) STAF-0834F 17 B
6.30 0.090 115 AC Printed Circuit Transformers SW-212 29 B
6.30 0.090 115/230 AC Printed Circuit Transformers DSW-212 29 B
6.30 0.180 115 AC Printed Circuit Transformers SW-212 29 B
6.30 0.180 115/230 AC Printed Circuit Transformers DSW-212 29 B
6.30 0.200 115 AC Printed Circuit Transformers SW-312 29 B
6.30 0.200 115/230 AC Printed Circuit Transformers DSW-312 29 B
6.30 0.300 117 AC Power Transformers * P-8385 47 B
6.30 0.350 115/230 AC Printed Circuit Transformers (Plug-In Series) PPC-18 33 C
6.30 0.400 115 AC Printed Circuit Transformers SW-312 29 B
6.30 0.400 115/230 AC Printed Circuit Transformers DSW-312 29 B
6.30 0.400 115/230 AC TransGlobal International (PC Mount) TG2H-12 23 B
6.30 0.450 115/230 AC Printed Circuit Transformers LB-612 27 C
6.30 0.500 115 AC Printed Circuit Transformers SW-412 29 B
6.30 0.500 115/230 AC Printed Circuit Transformers DSW-412 29 B
6.30 0.600 117 AC Power Transformers * P-6465 47 B
6.30 0.600 230 AC Power Transformers * P-8705 47 C
6.30 0.700 115/230 AC Printed Circuit Transformers (Plug-In Series) PPC-18 33 C
6.30 0.800 115/230 AC TransGlobal International (PC Mount) TG05-12 23 B
6.30 0.900 115/230 AC Printed Circuit Transformers LB-1212 27 C
6.30 0.900 115/230 AC Printed Circuit Transformers LB-612 27 C
6.30 1.000 115 AC Printed Circuit Transformers SW-412 29 B
6.30 1.000 115 AC Printed Circuit Transformers SW-512 29 B
6.30 1.000 115/230 AC Printed Circuit Transformers DSW-412 29 B
Transformer and Power Supplies
Q U I C K S E L E C T I O N G U I D E
White-Rodgers • Emerson Electric Co.
9797 Reavis Road • St. Louis, MO 63123
(314) 865-8799 • Fax (314) 638-2400 109
Transformer and Power Supplies
Output Output Input Output Catalog Section (transformer type) C.T. STANCOR Pg. Sec.
Voltage Amps Voltage (AC) AC/DC Part No.
6.30 1.000 115/230 AC Printed Circuit Transformers DSW-512 29 B
6.30 1.000 117 AC Power Transformers P-8389 47 C
6.30 1.000 117 AC Power Transformers P-8384 48 C
6.30 1.200 117 AC Power Transformers * P-6134 47 C
6.30 1.200 117 AC Power Transformers P-8190 47 C
6.30 1.500 117 AC Power Transformers P-8550 48 D
6.30 1.600 115 AC Printed Circuit Transformers SW-612 29 B
6.30 1.600 115/230 AC Printed Circuit Transformers DSW-612 29 B
6.30 1.600 115/230 AC TransGlobal International (PC Mount) TG10-12 23 B
6.30 1.800 115/230 AC Printed Circuit Transformers LB-1212 27 C
6.30 2.000 115 AC Printed Circuit Transformers SW-512 29 B
6.30 2.000 115/230 AC Printed Circuit Transformers DSW-512 29 B
6.30 2.000 117 AC Power Transformers P-8130 48 D
6.30 2.000 230 AC Power Transformers P-8715 48 D
6.30 3.000 117 AC Power Transformers * P-6466 47 D
6.30 3.000 117 AC Power Transformers P-8358 48 D
6.30 3.200 115 AC Printed Circuit Transformers SW-612 29 B
6.30 3.200 115/230 AC Printed Circuit Transformers DSW-612 29 B
6.30 3.200 115/230 AC TransGlobal International (PC Mount) TG20-12 23 B
6.30 3.500 117 AC Power Transformers (Multiple Secondary) * P-6429 52 A
6.30 4.000 115/230 AC TransGlobal International (Chassis Mount) TGC25-12 21 B
6.30 4.000 117 AC Power Transformers * P-8648 47 D
6.30 4.000 117 AC Power Transformers P-8641 48 E
6.30 4.000 230 AC Power Transformers P-8716 48 E
6.30 4.800 115/230 AC TransGlobal International (PC Mount) TG30-12 23 B
6.30 5.000 117 AC Power Transformers * P-8649 47 D
6.30 6.000 117 AC Power Transformers * P-3064 47 D
6.30 6.000 117 AC Power Transformers P-8642 48 E
6.30 6.000 117/107 AC Power Transformers * P-6456 47 E
6.30 6.800 115/230 AC TransGlobal International (Chassis Mount) TGC43-12 21 B
6.30 8.000 117 AC Power Transformers * P-8651 47 E
6.30 8.800 115/230 AC TransGlobal International (PC Mount) TG56-12 23 B
6.30 10.000 117 AC Power Transformers * P-6464 47 E
6.30 10.000 117 AC Power Transformers P-8644 48 E
6.30 10.000 117/107 AC Power Transformers * P-6308 47 E
6.30 12.600 115/230 AC TransGlobal International (Chassis Mount) TGC80-12 21 B
6.30 20.000 117/107 AC Power Transformers * P-6309 47 F
6.30 20.600 115/230 AC TransGlobal International (Chassis Mount) TGC130-12 21 B
6.30 28.000 115/230 AC TransGlobal International (Chassis Mount) TGC175-12 21 B
7.00 0.250 115 AC Power Transformers P-8553 48 F
7.00 0.250 115/230 AC Power Transformers P-8577 48 F
7.00 1.000 115 AC Power Transformers P-8555 48 F
7.00 2.000 115 AC Power Transformers P-8556 48 F
7.00 4.000 115 AC Power Transformers P-8557 48 G
7.00 6.000 115 AC Power Transformers P-8558 48 G
7.50 0.100 115 AC Printed Circuit Transformers (Plug-In Series) PPC-2 33 A
7.50 0.100 115/230 AC Printed Circuit Transformers (Plug-In Series) PPC-46 33 A
7.50 0.100 120 DC Power Sources (Wall Plug-In) STA-3575 13 E
7.50 0.150 115/230 AC Printed Circuit Transformers LB-215 27 C
110
Q U I C K S E L E C T I O N G U I D E
White-Rodgers • Emerson Electric Co.
9797 Reavis Road • St. Louis, MO 63123
(314) 865-8799 • Fax (314) 638-2400
Output Output Input Output Catalog Section (transformer type) C.T. STANCOR Pg. Sec.
Voltage Amps Voltage (AC) AC/DC Part No.
7.50 0.200 115 AC Printed Circuit Transformers (Plug-In Series) PPC-2 33 A
7.50 0.200 115/230 AC Printed Circuit Transformers (Plug-In Series) PPC-46 33 A
7.50 0.225 115/230 AC Printed Circuit Transformers LB-315 27 C
7.50 0.300 115/230 AC Printed Circuit Transformers LB-215 27 C
7.50 0.300 115/230 AC Printed Circuit Transformers (Plug-In Series) PPC-12 33 C
7.50 0.300 115/230 AC Printed Circuit Transformers (Plug-In Series) PPC-47 33 C
7.50 0.300 120 DC Power Sources (Wall Plug-In) STA-3575A 13 E
7.50 0.300 230/50HZ DC Power Sources (Wall Plug-In) STAF-2243F 17 C
7.50 0.450 115/230 AC Printed Circuit Transformers LB-315 27 C
7.50 0.500 115 AC Printed Circuit Transformers (Plug-In Series) PPC-22 33 E
7.50 0.500 120 DC Power Sources (Wall Plug-In) STA-4175A 13 F
7.50 0.600 115/230 AC Printed Circuit Transformers (Plug-In Series) PPC-12 33 C
7.50 0.600 115/230 AC Printed Circuit Transformers (Plug-In Series) PPC-47 33 C
7.50 1.000 115 AC Printed Circuit Transformers (Plug-In Series) PPC-22 33 E
7.50 1.000 120 DC Power Sources (Wall Plug-In) STA-4875 13 E
7.50 1.000 120 DC Power Sources (Wall Plug-In) STA-4875-4 13 F
7.50 1.500 120 DC Power Sources (Wall Plug-In) STA-5775 13 F
7.50 4.000 117 AC Power Transformers * P-5015 47 F
7.50 8.000 117 AC Power Transformers * P-6138 47 F
8.00 0.070 115 AC Printed Circuit Transformers SW-216 29 C
8.00 0.070 115/230 AC Printed Circuit Transformers DSW-216 29 C
8.00 0.140 115 AC Printed Circuit Transformers SW-216 29 C
8.00 0.140 115/230 AC Printed Circuit Transformers DSW-216 29 C
8.00 0.150 115 AC Printed Circuit Transformers SW-316 29 C
8.00 0.150 115/230 AC Printed Circuit Transformers DSW-316 29 C
8.00 0.188 115 AC Printed Circuit Transformers (Plug-In Series) * PPC-1 33 A
8.00 0.280 115/230 AC Printed Circuit Transformers (Plug-In Series) PPC-19 33 C
8.00 0.300 115 AC Printed Circuit Transformers SW-316 29 C
8.00 0.300 115/230 AC Printed Circuit Transformers DSW-316 29 C
8.00 0.300 115/230 AC TransGlobal International (PC Mount) TG2H-16 23 C
8.00 0.350 115/230 AC Printed Circuit Transformers LB-616 27 D
8.00 0.400 115 AC Printed Circuit Transformers SW-416 29 C
8.00 0.400 115/230 AC Printed Circuit Transformers DSW-416 29 C
8.00 0.560 115/230 AC Printed Circuit Transformers (Plug-In Series) PPC-19 33 C
8.00 0.562 115 AC Printed Circuit Transformers (Plug-In Series) * PPC-11 33 B
8.00 0.620 115/230 AC TransGlobal International (PC Mount) TG05-16 23 C
8.00 0.700 115/230 AC Printed Circuit Transformers LB-1216 27 D
8.00 0.700 115/230 AC Printed Circuit Transformers LB-616 27 D
8.00 0.800 115 AC Printed Circuit Transformers SW-416 29 C
8.00 0.800 115 AC Printed Circuit Transformers SW-516 29 C
8.00 0.800 115/230 AC Printed Circuit Transformers DSW-416 29 C
8.00 0.800 115/230 AC Printed Circuit Transformers DSW-516 29 C
8.00 1.250 115 AC Printed Circuit Transformers SW-616 29 C
8.00 1.250 115/230 AC Printed Circuit Transformers DSW-616 29 C
8.00 1.250 115/230 AC TransGlobal International (PC Mount) TG10-16 23 C
8.00 1.400 115/230 AC Printed Circuit Transformers LB-1216 27 D
8.00 1.500 115/230 AC Printed Circuit Transformers (Plug-In Series) PPC-56 33 E
8.00 1.600 115 AC Printed Circuit Transformers SW-516 29 C
8.00 1.600 115/230 AC Printed Circuit Transformers DSW-516 29 C
Transformer and Power Supplies
Q U I C K S E L E C T I O N G U I D E
White-Rodgers • Emerson Electric Co.
9797 Reavis Road • St. Louis, MO 63123
(314) 865-8799 • Fax (314) 638-2400 111
Transformer and Power Supplies
Output Output Input Output Catalog Section (transformer type) C.T. STANCOR Pg. Sec.
Voltage Amps Voltage (AC) AC/DC Part No.
8.00 2.500 115 AC Printed Circuit Transformers SW-616 29 C
8.00 2.500 115/230 AC Printed Circuit Transformers DSW-616 29 C
8.00 2.500 115/230 AC TransGlobal International (PC Mount) TG20-16 23 C
8.00 3.000 115/230 AC Printed Circuit Transformers (Plug-In Series) PPC-56 33 E
8.00 3.200 115/230 AC TransGlobal International (Chassis Mount) TGC25-16 21 C
8.00 3.800 115/230 AC TransGlobal International (PC Mount) TG30-16 23 C
8.00 5.400 115/230 AC TransGlobal International (Chassis Mount) TGC43-16 21 C
8.00 7.000 115/230 AC TransGlobal International (PC Mount) TG56-16 23 C
8.00 10.000 115/230 AC TransGlobal International (Chassis Mount) TGC80-16 21 C
8.00 16.200 115/230 AC TransGlobal International (Chassis Mount) TGC130-16 21 C
8.00 22.000 115/230 AC TransGlobal International (Chassis Mount) TGC175-16 21 C
9.00 0.100 120 DC Power Sources (Wall Plug-In) STA-3590B 13 F
9.00 0.130 230/50HZ AC Power Sources (Wall Plug-In) STAF-0437F 17 C
9.00 0.200 120 DC Power Sources (Wall Plug-In) STA-3590 13 G
9.00 0.200 120 DC Power Sources (Wall Plug-In) STA-4190C 13 G
9.00 0.200 230/50HZ DC Power Sources (Wall Plug-In) STAF-2223F 17 C
9.00 0.300 120 DC Power Sources (Wall Plug-In) STA-4175A 13 F
9.00 0.300 120 AC Power Sources (Wall Plug-In) STA-4190B 13 G
9.00 0.300 120 DC Power Sources (Wall Plug-In) STA-3590A 13 G
9.00 0.300 230/50HZ DC Power Sources (Wall Plug-In) STAF-3309F 17 C
9.00 0.400 120 DC Power Sources (Wall Plug-In) STA-4890B 13 H
9.00 0.500 120 AC Power Sources (Wall Plug-In) STA-4190D 13 H
9.00 0.500 120 DC Power Sources (Wall Plug-In) STA-4190A 13 H
9.00 0.500 230/50HZ DC Power Sources (Wall Plug-In) STAF-1058F 17 C
9.00 0.700 120 DC Power Sources (Wall Plug-In) STA-4190F 13 H
9.00 0.750 115 AC Power Transformers P-8690 48 G
9.00 1.000 115 AC Power Transformers P-8691 48 G
9.00 1.000 120 DC Power Sources (Wall Plug-In) STA-4890 13 I
9.00 1.000 230/50HZ DC Power Sources (Wall Plug-In) STAF-0329F 17 D
9.00 1.200 120 DC Power Sources (Wall Plug-In) STA-4890A 13 I
9.00 1.200 120 DC Power Sources (Wall Plug-In) STA-4890A-4 13 I
9.00 1.500 115 AC Power Transformers P-8692 48 H
9.00 2.000 115 AC Power Transformers P-8693 48 H
9.00 3.000 120 DC Power Sources (Desk-Top) STA-6690 13 I
9.00 3.400 120 AC Power Sources (Desk-Top) STA-5790 13 I
10.00 0.050 115/230 AC Power Transformers P-8500 48 H
10.00 0.055 115 AC Printed Circuit Transformers SW-220 29 D
10.00 0.055 115/230 AC Printed Circuit Transformers DSW-220 29 D
10.00 0.110 115 AC Printed Circuit Transformers * SW-210 29 A
10.00 0.110 115 AC Printed Circuit Transformers SW-220 29 D
10.00 0.110 115/230 AC Printed Circuit Transformers * DSW-210 29 A
10.00 0.110 115/230 AC Printed Circuit Transformers DSW-220 29 D
10.00 0.120 115 AC Printed Circuit Transformers SW-320 29 D
10.00 0.120 115/230 AC Printed Circuit Transformers DSW-320 29 D
10.00 0.200 115/230 AC Printed Circuit Transformers * LB-210 27 A
10.00 0.200 115/230 AC Printed Circuit Transformers LB-420 27 D
10.00 0.225 115/230 AC Printed Circuit Transformers (Plug-In Series) PPC-28 33 C
10.00 0.240 115 AC Printed Circuit Transformers SW-320 29 D
10.00 0.240 115/230 AC Printed Circuit Transformers DSW-320 29 D
112
Q U I C K S E L E C T I O N G U I D E
White-Rodgers • Emerson Electric Co.
9797 Reavis Road • St. Louis, MO 63123
(314) 865-8799 • Fax (314) 638-2400
Output Output Input Output Catalog Section (transformer type) C.T. STANCOR Pg. Sec.
Voltage Amps Voltage (AC) AC/DC Part No.
10.00 0.240 115/230 AC TransGlobal International (PC Mount) TG2H-20 23 D
10.00 0.250 115 AC Printed Circuit Transformers * SW-310 29 A
10.00 0.250 115/230 AC Printed Circuit Transformers LB-520 27 D
10.00 0.250 115/230 AC Printed Circuit Transformers * DSW-310 29 A
10.00 0.250 115/230 AC Power Transformers P-8504 48 H
10.00 0.250 115/230 AC TransGlobal International (PC Mount) * TG2H-10 23 A
10.00 0.300 115 AC Printed Circuit Transformers SW-420 29 D
10.00 0.300 115/230 AC Printed Circuit Transformers * LB-310 27 A
10.00 0.300 115/230 AC Printed Circuit Transformers LB-620 27 E
10.00 0.300 115/230 AC Printed Circuit Transformers DSW-420 29 D
10.00 0.300 115/230 AC Power Transformers P-8505 48 I
10.00 0.300 120 DC Power Sources (Wall Plug-In) STA-4110A 14 A
10.00 0.400 115/230 AC Printed Circuit Transformers * LB-410 27 A
10.00 0.400 115/230 AC Printed Circuit Transformers LB-420 27 D
10.00 0.450 115/230 AC Printed Circuit Transformers (Plug-In Series) PPC-28 33 C
10.00 0.500 115/230 AC Printed Circuit Transformers * LB-510 27 A
10.00 0.500 115/230 AC Printed Circuit Transformers LB-520 27 D
10.00 0.500 115/230 AC Power Transformers P-8507 48 I
10.00 0.500 115/230 AC TransGlobal International (PC Mount) * TG05-10 23 A
10.00 0.500 115/230 AC TransGlobal International (PC Mount) TG05-20 23 D
10.00 0.600 115 AC Printed Circuit Transformers * SW-410 29 A
10.00 0.600 115 AC Printed Circuit Transformers SW-420 29 D
10.00 0.600 115/230 AC Printed Circuit Transformers * LB-610 27 B
10.00 0.600 115/230 AC Printed Circuit Transformers LB-1220 27 E
10.00 0.600 115/230 AC Printed Circuit Transformers LB-620 27 E
10.00 0.600 115/230 AC Printed Circuit Transformers * DSW-410 29 A
10.00 0.600 115/230 AC Printed Circuit Transformers DSW-420 29 D
10.00 0.600 115/230 AC Printed Circuit Transformers DSW-520 29 D
10.00 0.600 115/230 AC Printed Circuit Transformers DSW-520 29 D
10.00 0.700 120 AC Power Sources (Wall Plug-In) STA-4110 14 A
10.00 1.000 115 AC Printed Circuit Transformers SW-620 29 D
10.00 1.000 115/230 AC Printed Circuit Transformers DSW-620 29 D
10.00 1.000 115/230 AC Power Transformers P-8508 48 I
10.00 1.000 115/230 AC TransGlobal International (PC Mount) * TG10-10 23 A
10.00 1.000 115/230 AC TransGlobal International (PC Mount) TG10-20 23 D
10.00 1.000 117 AC Power Transformers * P-8652 47 F
10.00 1.000 117 AC Power Transformers P-8604 49 A
10.00 1.200 115 AC Printed Circuit Transformers * SW-510 29 A
10.00 1.200 115/230 AC Printed Circuit Transformers * LB-1210 27 B
10.00 1.200 115/230 AC Printed Circuit Transformers LB-1220 27 E
10.00 1.200 115/230 AC Printed Circuit Transformers * DSW-510 29 A
10.00 1.200 115/230 AC Printed Circuit Transformers DSW-520 29 D
10.00 1.200 115/230 AC Printed Circuit Transformers DSW-520 29 D
10.00 1.200 115/230 AC Printed Circuit Transformers (Plug-In Series) PPC-57 33 E
10.00 2.000 115 AC Printed Circuit Transformers * SW-610 29 A
10.00 2.000 115 AC Printed Circuit Transformers SW-620 29 D
10.00 2.000 115 AC Power Transformers P-8559 49 A
10.00 2.000 115/230 AC Printed Circuit Transformers * DSW-610 29 A
10.00 2.000 115/230 AC Printed Circuit Transformers DSW-620 29 D
Transformer and Power Supplies
Q U I C K S E L E C T I O N G U I D E
White-Rodgers • Emerson Electric Co.
9797 Reavis Road • St. Louis, MO 63123
(314) 865-8799 • Fax (314) 638-2400 113
Transformer and Power Supplies
Output Output Input Output Catalog Section (transformer type) C.T. STANCOR Pg. Sec.
Voltage Amps Voltage (AC) AC/DC Part No.
10.00 2.000 115/230 AC TransGlobal International (PC Mount) * TG20-10 23 A
10.00 2.000 115/230 AC TransGlobal International (PC Mount) TG20-20 23 D
10.00 2.000 117 AC Power Transformers * P-8653 47 G
10.00 2.400 115/230 AC Printed Circuit Transformers (Plug-In Series) PPC-57 33 E
10.00 2.500 115/230 AC TransGlobal International (Chassis Mount) * TGC25-10 21 A
10.00 2.500 115/230 AC TransGlobal International (Chassis Mount) TGC25-20 21 D
10.00 3.000 115/230 AC TransGlobal International (PC Mount) * TG30-10 23 A
10.00 3.000 115/230 AC TransGlobal International (PC Mount) TG30-20 23 D
10.00 3.000 117 AC Power Transformers * P-8380 47 G
10.00 4.000 115 AC Power Transformers P-8560 49 A
10.00 4.000 117 AC Power Transformers * P-5016 47 G
10.00 4.000 117 AC Power Transformers * P-8654 47 G
10.00 4.300 115/230 AC TransGlobal International (Chassis Mount) * TGC43-10 21 A
10.00 4.400 115/230 AC TransGlobal International (Chassis Mount) TGC43-20 21 D
10.00 5.000 117/107 AC Power Transformers * P-6458 47 G
10.00 5.600 115/230 AC TransGlobal International (PC Mount) * TG56-10 23 A
10.00 5.600 115/230 AC TransGlobal International (PC Mount) TG56-20 23 D
10.00 6.000 117 AC Power Transformers * P-8655 48 A
10.00 8.000 115/230 AC TransGlobal International (Chassis Mount) * TGC80-10 21 A
10.00 8.000 115/230 AC TransGlobal International (Chassis Mount) TGC80-20 21 D
10.00 8.000 117 AC Power Transformers * P-8656 48 A
10.00 10.000 117 AC Power Transformers * P-6461 48 A
10.00 13.000 115/230 AC TransGlobal International (Chassis Mount) * TGC130-10 21 A
10.00 13.000 115/230 AC TransGlobal International (Chassis Mount) TGC130-20 21 D
10.00 17.500 115/230 AC TransGlobal International (Chassis Mount) * TGC175-10 21 A
10.00 17.600 115/230 AC TransGlobal International (Chassis Mount) TGC175-20 21 D
12.00 0.045 115 AC Printed Circuit Transformers SW-224 30 A
12.00 0.045 115/230 AC Printed Circuit Transformers DSW-224 30 A
12.00 0.050 120 DC Power Sources (Wall Plug-In) STA-3512 14 A
12.00 0.085 117 AC Power Transformers P-8394 49 B
12.00 0.085 230 AC Power Transformers P-8720 49 B
12.00 0.090 115 AC Printed Circuit Transformers SW-224 30 A
12.00 0.090 115/230 AC Printed Circuit Transformers DSW-224 30 A
12.00 0.100 115 AC Printed Circuit Transformers SW-324 30 A
12.00 0.100 115/230 AC Printed Circuit Transformers DSW-324 30 A
12.00 0.100 117 AC Power Transformers (Multiple Secondary) * P-8361 52 A
12.00 0.100 120 DC Power Sources (Wall Plug-In) STA-3512C 14 A
12.00 0.100 120 AC Power Sources (Wall Plug-In) STA-3512E 14 B
12.00 0.150 117 AC Power Transformers P-8390 48 A
12.00 0.150 117 AC Power Transformers (Multiple Secondary) * P-8362 52 B
12.00 0.167 115/230 AC Printed Circuit Transformers LB-424 27 E
12.00 0.180 115/230 AC Printed Circuit Transformers (Plug-In Series) PPC-20 33 D
12.00 0.200 115 AC Printed Circuit Transformers SW-324 30 A
12.00 0.200 115/230 AC Printed Circuit Transformers DSW-324 30 A
12.00 0.200 115/230 AC Power Transformers P-8578 49 C
12.00 0.200 115/230 AC TransGlobal International (PC Mount) TG2H-24 23 E
12.00 0.200 117 AC Power Transformers P-8395 49 B
12.00 0.200 120 AC Power Sources (Wall Plug-In) STA-3512F 14 B
12.00 0.200 120 DC Power Sources (Wall Plug-In) STA-300R 14 B
114
Q U I C K S E L E C T I O N G U I D E
White-Rodgers • Emerson Electric Co.
9797 Reavis Road • St. Louis, MO 63123
(314) 865-8799 • Fax (314) 638-2400
Output Output Input Output Catalog Section (transformer type) C.T. STANCOR Pg. Sec.
Voltage Amps Voltage (AC) AC/DC Part No.
12.00 0.200 120 DC Power Sources (Wall Plug-In) STA-3512B 14 B
12.00 0.200 120 DC Power Sources (Desk-Top) STAR-9005 15 C
12.00 0.200 120 DC Power Sources (Desk-Top) STAR-9006 15 C
12.00 0.200 230 AC Power Transformers P-8721 49 C
12.00 0.208 115/230 AC Printed Circuit Transformers LB-524 27 E
12.00 0.250 115 AC Printed Circuit Transformers SW-424 30 A
12.00 0.250 115/230 AC Printed Circuit Transformers LB-624 27 F
12.00 0.250 115/230 AC Printed Circuit Transformers DSW-424 30 A
12.00 0.300 120 DC Power Sources (Wall Plug-In) STA-4112B 14 C
12.00 0.300 120 DC Power Sources (Desk-Top) STAR-9007 15 C
12.00 0.300 230/50HZ DC Power Sources (Wall Plug-In) STAF-3382F 17 D
12.00 0.330 115/230 AC Printed Circuit Transformers * LB-412 27 B
12.00 0.333 115/230 AC Printed Circuit Transformers LB-424 27 E
12.00 0.350 117 AC Power Transformers P-8391 48 B
12.00 0.360 115/230 AC Printed Circuit Transformers (Plug-In Series) PPC-20 33 D
12.00 0.400 117 AC Power Transformers P-8396 49 C
12.00 0.400 120 DC Power Sources (Wall Plug-In) STA-4112 14 C
12.00 0.400 230 AC Power Transformers P-8722 49 C
12.00 0.417 115/230 AC Printed Circuit Transformers * LB-512 27 B
12.00 0.417 115/230 AC Printed Circuit Transformers LB-524 27 E
12.00 0.420 115/230 AC TransGlobal International (PC Mount) TG05-24 23 E
12.00 0.500 115 AC Printed Circuit Transformers SW-424 30 A
12.00 0.500 115 AC Printed Circuit Transformers SW-524 30 A
12.00 0.500 115/230 AC Printed Circuit Transformers LB-1224 27 F
12.00 0.500 115/230 AC Printed Circuit Transformers LB-624 27 F
12.00 0.500 115/230 AC Printed Circuit Transformers DSW-424 30 A
12.00 0.500 115/230 AC Printed Circuit Transformers DSW-524 30 A
12.00 0.500 117 AC Power Transformers (Multiple Secondary) * P-8364 52 B
12.00 0.500 120 AC Power Sources (Wall Plug-In) STA-4112A 14 C
12.00 0.500 120 DC Power Sources (Wall Plug-In) STA-4112C 14 C
12.00 0.500 230/50HZ DC Power Sources (Wall Plug-In) STAF-2343F 17 D
12.00 0.600 120 DC Power Sources (Wall Plug-In) STA-4812D 14 D
12.00 0.700 117 AC Power Transformers P-8392 48 B
12.00 0.700 117 AC Power Transformers P-8397 49 D
12.00 0.700 230 AC Power Transformers P-8723 49 D
12.00 0.800 115 AC Printed Circuit Transformers SW-624 30 A
12.00 0.800 115/230 AC Printed Circuit Transformers DSW-624 30 A
12.00 0.840 115/230 AC TransGlobal International (PC Mount) TG10-24 23 E
12.00 0.850 120 AC Power Sources (Wall Plug-In) STA-4812B 14 D
12.00 1.000 115 AC Printed Circuit Transformers SW-524 30 A
12.00 1.000 115 AC Power Transformers (Dual Secondary) * P-8683 51 B
12.00 1.000 115/230 AC Printed Circuit Transformers LB-1224 27 F
12.00 1.000 115/230 AC Printed Circuit Transformers DSW-524 30 A
12.00 1.000 115/230 AC Printed Circuit Transformers (Plug-In Series) PPC-58 33 E
12.00 1.000 115/230 AC Power Transformers P-8575 49 D
12.00 1.000 115/230 AC Power Transformers (Dual Pri./Sec.) P-6375 52 C
12.00 1.000 117 AC Power Transformers P-8661 49 D
12.00 1.000 120 DC Power Sources (Wall Plug-In) STA-4812A 14 D
12.00 1.000 120 DC Power Sources (Wall Plug-In) STA-4812A-4 14 D
Transformer and Power Supplies
Q U I C K S E L E C T I O N G U I D E
White-Rodgers • Emerson Electric Co.
9797 Reavis Road • St. Louis, MO 63123
(314) 865-8799 • Fax (314) 638-2400 115
Transformer and Power Supplies
Output Output Input Output Catalog Section (transformer type) C.T. STANCOR Pg. Sec.
Voltage Amps Voltage (AC) AC/DC Part No.
12.00 1.000 120 DC Power Sources (Desk-Top) STAR-9003 15 C
12.00 1.000 230/50HZ DC Power Sources (Desk-Top) STAF-1454FD 17 D
12.00 1.200 117 AC Power Transformers P-8393 48 B
12.00 1.200 120 DC Power Sources (Wall Plug-In) STA-5712 14 E
12.00 1.200 120 DC Power Sources (Wall Plug-In) STA-5712-4 14 E
12.00 1.200 120 DC Power Sources (Desk-Top) STAR-9004 15 C
12.00 1.200 230/50HZ DC Power Sources (Desk-Top) STAF-1948FD 17 D
12.00 1.600 115 AC Printed Circuit Transformers SW-624 30 A
12.00 1.600 115/230 AC Printed Circuit Transformers DSW-624 30 A
12.00 1.660 115/230 AC TransGlobal International (PC Mount) TG20-24 23 E
12.00 2.000 115/230 AC Printed Circuit Transformers (Plug-In Series) PPC-58 33 E
12.00 2.000 115/230 AC Power Transformers (Dual Pri./Sec.) P-6376 52 C
12.00 2.000 115/230 AC Power Transformers (Dual Pri./Sec.) P-6377 52 C
12.00 2.000 115/230 AC TransGlobal International (Chassis Mount) TGC25-24 21 E
12.00 2.000 117 AC Power Transformers P-8657 48 B
12.00 2.000 117 AC Power Transformers P-8662 49 E
12.00 2.000 120 DC Power Sources (Desk-Top) STA-6612 14 E
12.00 2.500 115/230 AC TransGlobal International (PC Mount) TG30-24 23 E
12.00 2.500 120 DC Power Sources (Desk-Top) STA-6612A 14 E
12.00 3.000 120 DC Power Sources (Desk-Top) STA-6612B 14 F
12.00 3.600 115/230 AC TransGlobal International (Chassis Mount) TGC43-24 21 E
12.00 4.000 115/230 AC Power Transformers (Dual Pri./Sec.) P-6377 52 C
12.00 4.000 115/230 AC Power Transformers (Dual Pri./Sec.) P-6378 52 C
12.00 4.000 117 AC Power Transformers P-8658 48 C
12.00 4.000 117 AC Power Transformers P-8663 49 E
12.00 4.660 115/230 AC TransGlobal International (PC Mount) TG56-24 23 E
12.00 6.000 117 AC Power Transformers P-8659 48 C
12.00 6.000 117 AC Power Transformers P-8664 49 E
12.00 6.600 115/230 AC TransGlobal International (Chassis Mount) TGC80-24 21 E
12.00 8.000 115/230 AC Power Transformers (Dual Pri./Sec.) P-6378 52 C
12.00 8.000 115/230 AC Power Transformers (Dual Pri./Sec.) P-6379 52 C
12.00 8.000 117 AC Power Transformers P-8660 48 C
12.00 8.000 117 AC Power Transformers P-8665 49 E
12.00 10.000 115 AC Power Transformers P-8695 49 F
12.00 10.800 115/230 AC TransGlobal International (Chassis Mount) TGC130-24 21 E
12.00 12.000 117 AC Power Transformers P-8666 49 F
12.00 14.600 115/230 AC TransGlobal International (Chassis Mount) TGC175-24 21 E
12.00 16.000 115/230 AC Power Transformers (Dual Pri./Sec.) P-6379 52 C
12.25 0.250 117 AC Power Transformers P-8607 49 H
12.50 0.800 120 DC Power Sources (Wall Plug-In) STA-4812 14 F
12.60 0.090 115 AC Printed Circuit Transformers * SW-212 29 B
12.60 0.090 115/230 AC Printed Circuit Transformers * DSW-212 29 B
12.60 0.200 115 AC Printed Circuit Transformers * SW-312 29 B
12.60 0.200 115/230 AC Printed Circuit Transformers * DSW-312 29 B
12.60 0.200 115/230 AC TransGlobal International (PC Mount) * TG2H-12 23 B
12.60 0.350 115/230 AC Printed Circuit Transformers (Plug-In Series) * PPC-18 33 C
12.60 0.400 115/230 AC TransGlobal International (PC Mount) * TG05-12 23 B
12.60 0.450 115/230 AC Printed Circuit Transformers * LB-612 27 C
12.60 0.500 115 AC Printed Circuit Transformers * SW-412 29 B
116
Q U I C K S E L E C T I O N G U I D E
White-Rodgers • Emerson Electric Co.
9797 Reavis Road • St. Louis, MO 63123
(314) 865-8799 • Fax (314) 638-2400
Output Output Input Output Catalog Section (transformer type) C.T. STANCOR Pg. Sec.
Voltage Amps Voltage (AC) AC/DC Part No.
12.60 0.500 115/230 AC Printed Circuit Transformers * DSW-412 29 B
12.60 0.800 115/230 AC TransGlobal International (PC Mount) * TG10-12 23 B
12.60 0.800 230/50HZ DC Power Sources (Wall Plug-In) STAF-0460F 17 E
12.60 0.900 115/230 AC Printed Circuit Transformers * LB-1212 27 C
12.60 1.000 115 AC Printed Circuit Transformers * SW-512 29 B
12.60 1.000 115/230 AC Printed Circuit Transformers * DSW-512 29 B
12.60 1.000 117 AC Power Transformers * P-8384 48 C
12.60 1.000 117 AC Power Transformers P-8180 49 G
12.60 1.500 117 AC Power Transformers * P-8550 48 D
12.60 1.600 115 AC Printed Circuit Transformers * SW-612 31 B
12.60 1.600 115/230 AC Printed Circuit Transformers * DSW-612 29 B
12.60 1.600 115/230 AC TransGlobal International (PC Mount) * TG20-12 23 B
12.60 2.000 115/230 AC Power Transformers P-8574 49 G
12.60 2.000 115/230 AC TransGlobal International (Chassis Mount) * TGC25-12 21 B
12.60 2.000 117 AC Power Transformers * P-8130 48 D
12.60 2.000 117 AC Power Transformers P-8357 49 G
12.60 2.000 230 AC Power Transformers * P-8715 48 D
12.60 2.400 115/230 AC TransGlobal International (PC Mount) * TG30-12 23 B
12.60 2.800 117 AC Power Transformers P-8388 49 G
12.60 3.000 117 AC Power Transformers * P-8358 48 D
12.60 3.400 115/230 AC TransGlobal International (Chassis Mount) * TGC43-12 21 B
12.60 4.000 117 AC Power Transformers * P-8641 48 E
12.60 4.000 230 AC Power Transformers * P-8716 48 E
12.60 4.400 115/230 AC TransGlobal International (PC Mount) * TG56-12 23 B
12.60 5.000 117 AC Power Transformers P-8645 49 H
12.60 6.000 117 AC Power Transformers * P-8642 48 E
12.60 6.300 115/230 AC TransGlobal International (Chassis Mount) * TGC80-12 21 B
12.60 10.000 117 AC Power Transformers * P-8644 48 E
12.60 10.300 115/230 AC TransGlobal International (Chassis Mount) * TGC130-12 21 B
12.60 14.000 115/230 AC TransGlobal International (Chassis Mount) * TGC175-12 21 B
13.00 0.250 117 AC Power Transformers P-8607 49 H
13.40 1.000 117 AC Power Transformers P-8609 49 H
13.50 1.300 120 DC Power Sources (Wall Plug-In) STA-5713 14 F
13.50 1.300 230/50HZ DC Power Sources (Desk-Top) STAF-1059FD 17 E
13.50 1.700 120 DC Power Sources (Wall Plug-In) STA-5713A 14 F
13.50 1.700 120 DC Power Sources (Desk-Top) STA-5713AC 14 G
13.50 1.700 230/50HZ DC Power Sources (Desk-Top) STAF-2134F 17 E
13.50 2.100 120 DC Power Sources (Desk-Top) STA-6013A 14 G
13.50 2.100 230/50HZ DC Power Sources (Desk-Top) STAF-3775F 17 E
13.50 2.400 120 DC Power Sources (Desk-Top) STA-6613 14 G
13.50 2.400 230/50HZ DC Power Sources (Desk-Top) STAF-3777F 17 E
13.75 0.250 117 AC Power Transformers P-8607 49 H
14.00 0.040 115 AC Printed Circuit Transformers SW-228 30 B
14.00 0.040 115/230 AC Printed Circuit Transformers DSW-228 30 B
14.00 0.080 115 AC Printed Circuit Transformers SW-228 30 B
14.00 0.080 115/230 AC Printed Circuit Transformers DSW-228 30 B
14.00 0.085 115 AC Printed Circuit Transformers SW-328 30 B
14.00 0.085 117 AC Power Transformers P-8600 49 H
14.00 0.170 115 AC Printed Circuit Transformers SW-328 30 B
Transformer and Power Supplies
Q U I C K S E L E C T I O N G U I D E
White-Rodgers • Emerson Electric Co.
9797 Reavis Road • St. Louis, MO 63123
(314) 865-8799 • Fax (314) 638-2400 117
Transformer and Power Supplies
Output Output Input Output Catalog Section (transformer type) C.T. STANCOR Pg. Sec.
Voltage Amps Voltage (AC) AC/DC Part No.
14.00 0.170 115/230 AC Printed Circuit Transformers DSW-328 30 B
14.00 0.175 117 AC Power Transformers P-8601 49 I
14.00 0.180 115/230 AC TransGlobal International (PC Mount) TG2H-28 23 F
14.00 0.200 115 AC Printed Circuit Transformers SW-428 30 B
14.00 0.200 115/230 AC Printed Circuit Transformers DSW-428 30 B
14.00 0.250 115 AC Power Transformers * P-8553 48 F
14.00 0.250 115/230 AC Power Transformers * P-8577 48 F
14.00 0.300 117 AC Power Transformers P-8602 49 I
14.00 0.360 115/230 AC TransGlobal International (PC Mount) TG05-28 23 F
14.00 0.400 115 AC Printed Circuit Transformers SW-428 30 B
14.00 0.400 115/230 AC Printed Circuit Transformers DSW-428 30 B
14.00 0.420 115 AC Printed Circuit Transformers SW-528 30 B
14.00 0.420 115/230 AC Printed Circuit Transformers DSW-528 30 B
14.00 0.700 115 AC Printed Circuit Transformers SW-628 30 B
14.00 0.700 115/230 AC Printed Circuit Transformers DSW-628 30 B
14.00 0.720 115/230 AC TransGlobal International (PC Mount) TG10-28 23 F
14.00 0.800 117 AC Power Transformers P-8603 49 I
14.00 0.840 115 AC Printed Circuit Transformers SW-528 30 B
14.00 0.840 115/230 AC Printed Circuit Transformers DSW-528 30 B
14.00 0.850 115/230 AC Printed Circuit Transformers DSW-328 30 B
14.00 1.000 115 AC Power Transformers * P-8555 48 F
14.00 1.000 117 AC Power Transformers P-8667 50 A
14.00 1.400 115 AC Printed Circuit Transformers SW-628 30 B
14.00 1.400 115/230 AC Printed Circuit Transformers DSW-628 30 B
14.00 1.400 230/50HZ DC Power Sources (Desk-Top) STAF-3613F 17 F
14.00 1.440 115/230 AC TransGlobal International (PC Mount) TG20-28 23 F
14.00 1.800 115/230 AC TransGlobal International (Chassis Mount) TGC25-28 21 F
14.00 2.000 115 AC Power Transformers * P-8556 48 F
14.00 2.000 117 AC Power Transformers P-8668 50 A
14.00 2.120 115/230 AC TransGlobal International (PC Mount) TG30-28 23 F
14.00 3.000 115/230 AC TransGlobal International (Chassis Mount) TGC43-28 21 F
14.00 4.000 115 AC Power Transformers * P-8557 48 G
14.00 4.000 115/230 AC TransGlobal International (PC Mount) TG56-28 23 F
14.00 4.000 117 AC Power Transformers P-8669 50 A
14.00 5.600 115/230 AC TransGlobal International (Chassis Mount) TGC80-28 21 F
14.00 6.000 115 AC Power Transformers * P-8558 48 G
14.00 6.000 117 AC Power Transformers P-8670 50 A
14.00 9.200 115/230 AC TransGlobal International (Chassis Mount) TGC130-28 21 F
14.00 12.500 115/230 AC TransGlobal International (Chassis Mount) TGC175-28 21 F
14.50 0.250 117 AC Power Transformers P-8607 49 H
14.50 0.800 120 DC Power Sources (Wall Plug-In) STA-4814 14 G
14.50 0.800 230/50HZ DC Power Sources (Wall Plug-In) STAF-0354F 17 F
15.00 0.050 115 AC Printed Circuit Transformers (Plug-In Series) PPC-3 33 A
15.00 0.050 115/230 AC Printed Circuit Transformers (Plug-In Series) PPC-8 33 A
15.00 0.100 115 AC Printed Circuit Transformers (Plug-In Series) * PPC-2 33 A
15.00 0.100 115 AC Printed Circuit Transformers (Plug-In Series) PPC-3 33 A
15.00 0.100 115/230 AC Printed Circuit Transformers (Plug-In Series) * PPC-46 33 A
15.00 0.100 115/230 AC Printed Circuit Transformers (Plug-In Series) PPC-8 33 A
15.00 0.150 115 AC Printed Circuit Transformers (Plug-In Series) PPC-13 33 D
118
Q U I C K S E L E C T I O N G U I D E
White-Rodgers • Emerson Electric Co.
9797 Reavis Road • St. Louis, MO 63123
(314) 865-8799 • Fax (314) 638-2400
Output Output Input Output Catalog Section (transformer type) C.T. STANCOR Pg. Sec.
Voltage Amps Voltage (AC) AC/DC Part No.
15.00 0.150 115/230 AC Printed Circuit Transformers * LB-215 27 C
15.00 0.150 115/230 AC Printed Circuit Transformers (Plug-In Series) PPC-48 33 D
15.00 0.225 115/230 AC Printed Circuit Transformers * LB-315 27 C
15.00 0.250 115 AC Printed Circuit Transformers (Plug-In Series) PPC-23 33 E
15.00 0.300 115 AC Printed Circuit Transformers (Plug-In Series) PPC-13 33 D
15.00 0.300 115/230 AC Printed Circuit Transformers (Plug-In Series) * PPC-12 33 C
15.00 0.300 115/230 AC Printed Circuit Transformers (Plug-In Series) * PPC-47 33 C
15.00 0.300 115/230 AC Printed Circuit Transformers (Plug-In Series) PPC-48 33 D
15.00 0.500 115 AC Printed Circuit Transformers (Plug-In Series) * PPC-22 33 E
15.00 0.500 115 AC Printed Circuit Transformers (Plug-In Series) PPC-23 33 E
15.00 0.600 120 DC Power Sources (Wall Plug-In) STA-4815 14 G
15.00 1.000 120 DC Power Sources (Wall Plug-In) STA-5715 14 H
15.00 1.000 120 DC Power Sources (Wall Plug-In) STA-5715-4 14 H
15.00 1.000 230/50HZ DC Power Sources (Desk-Top) STAF-1972F 17 F
15.00 2.000 120 DC Power Sources (Desk-Top) STA-6615 14 H
15.50 0.750 115 AC Power Transformers (Dual Secondary) * P-8750 51 B
16.00 0.035 115 AC Printed Circuit Transformers SW-232 30 C
16.00 0.035 115/230 AC Printed Circuit Transformers DSW-232 30 C
16.00 0.070 115 AC Printed Circuit Transformers * SW-216 29 C
16.00 0.070 115 AC Printed Circuit Transformers SW-232 30 C
16.00 0.070 115/230 AC Printed Circuit Transformers * DSW-216 29 C
16.00 0.070 115/230 AC Printed Circuit Transformers DSW-232 30 C
16.00 0.075 115 AC Printed Circuit Transformers SW-332 30 C
16.00 0.075 115/230 AC Printed Circuit Transformers DSW-332 30 C
16.00 0.150 115 AC Printed Circuit Transformers * SW-316 29 C
16.00 0.150 115 AC Printed Circuit Transformers SW-332 30 C
16.00 0.150 115/230 AC Printed Circuit Transformers * DSW-316 29 C
16.00 0.150 115/230 AC Printed Circuit Transformers DSW-332 30 C
16.00 0.150 115/230 AC TransGlobal International (PC Mount) * TG2H-16 23 C
16.00 0.188 115 AC Printed Circuit Transformers SW-432 30 C
16.00 0.188 115/230 AC Printed Circuit Transformers DSW-432 30 C
16.00 0.250 120 AC Power Sources (Wall Plug-In) STA-4116 14 H
16.00 0.280 115/230 AC Printed Circuit Transformers (Plug-In Series) * PPC-19 33 C
16.00 0.310 115/230 AC TransGlobal International (PC Mount) * TG05-16 23 C
16.00 0.350 115/230 AC Printed Circuit Transformers * LB-616 27 D
16.00 0.375 115 AC Printed Circuit Transformers SW-532 30 C
16.00 0.375 115/230 AC Printed Circuit Transformers DSW-532 30 C
16.00 0.376 115 AC Printed Circuit Transformers SW-432 30 C
16.00 0.376 115/230 AC Printed Circuit Transformers DSW-432 30 C
16.00 0.400 115 AC Printed Circuit Transformers * SW-416 29 C
16.00 0.400 115/230 AC Printed Circuit Transformers * DSW-416 29 C
16.00 0.620 115/230 AC TransGlobal International (PC Mount) * TG10-16 23 C
16.00 0.625 115 AC Printed Circuit Transformers SW-632 30 C
16.00 0.625 115/230 AC Printed Circuit Transformers DSW-632 30 C
16.00 0.700 115/230 AC Printed Circuit Transformers * LB-1216 27 D
16.00 0.750 115 AC Printed Circuit Transformers SW-532 30 C
16.00 0.750 115/230 AC Printed Circuit Transformers DSW-532 30 C
16.00 0.800 115 AC Printed Circuit Transformers * SW-516 29 C
16.00 0.800 115/230 AC Printed Circuit Transformers * DSW-516 29 C
Transformer and Power Supplies
Q U I C K S E L E C T I O N G U I D E
White-Rodgers • Emerson Electric Co.
9797 Reavis Road • St. Louis, MO 63123
(314) 865-8799 • Fax (314) 638-2400 119
Transformer and Power Supplies
Output Output Input Output Catalog Section (transformer type) C.T. STANCOR Pg. Sec.
Voltage Amps Voltage (AC) AC/DC Part No.
16.00 1.250 115 AC Printed Circuit Transformers * SW-616 29 C
16.00 1.250 115 AC Printed Circuit Transformers SW-632 30 C
16.00 1.250 115/230 AC Printed Circuit Transformers * DSW-616 29 C
16.00 1.250 115/230 AC Printed Circuit Transformers DSW-632 30 C
16.00 1.250 115/230 AC TransGlobal International (PC Mount) * TG20-16 23 C
16.00 1.500 115/230 AC Printed Circuit Transformers (Plug-In Series) * PPC-56 33 E
16.00 1.600 115/230 AC TransGlobal International (Chassis Mount) * TGC25-16 21 C
16.00 1.900 115/230 AC TransGlobal International (PC Mount) * TG30-16 23 C
16.00 2.700 115/230 AC TransGlobal International (Chassis Mount) * TGC43-16 21 C
16.00 3.500 115/230 AC TransGlobal International (PC Mount) * TG56-16 23 C
16.00 5.000 115/230 AC TransGlobal International (Chassis Mount) * TGC80-16 21 C
16.00 8.100 115/230 AC TransGlobal International (Chassis Mount) * TGC130-16 21 C
16.00 11.000 115/230 AC TransGlobal International (Chassis Mount) * TGC175-16 21 C
17.00 0.170 115/230 AC Printed Circuit Transformers LB-634 27 F
17.00 0.340 115/230 AC Printed Circuit Transformers LB-1234 27 F
17.00 0.340 115/230 AC Printed Circuit Transformers LB-634 27 F
17.00 0.680 115/230 AC Printed Circuit Transformers LB-1234 27 F
18.00 0.030 115 AC Printed Circuit Transformers SW-236 30 D
18.00 0.030 115/230 AC Printed Circuit Transformers DSW-236 30 D
18.00 0.060 115 AC Printed Circuit Transformers SW-236 30 D
18.00 0.060 115/230 AC Printed Circuit Transformers DSW-236 30 D
18.00 0.065 115 AC Printed Circuit Transformers SW-336 30 D
18.00 0.065 115/230 AC Printed Circuit Transformers DSW-336 30 D
18.00 0.065 117 AC Power Transformers P-8610 50 B
18.00 0.130 115 AC Printed Circuit Transformers SW-336 30 D
18.00 0.130 115/230 AC Printed Circuit Transformers DSW-336 30 D
18.00 0.135 117 AC Power Transformers P-8611 50 B
18.00 0.140 115/230 AC TransGlobal International (PC Mount) TG2H-36 24 A
18.00 0.170 115 AC Printed Circuit Transformers SW-436 30 D
18.00 0.170 115/230 AC Printed Circuit Transformers DSW-436 30 D
18.00 0.280 115/230 AC TransGlobal International (PC Mount) TG05-36 24 A
18.00 0.300 117 AC Power Transformers P-8612 50 B
18.00 0.300 120 AC Power Sources (Wall Plug-In) STA-4118 14 H
18.00 0.340 115 AC Printed Circuit Transformers SW-436 30 D
18.00 0.340 115/230 AC Printed Circuit Transformers DSW-436 30 D
18.00 0.350 115 AC Printed Circuit Transformers SW-536 30 D
18.00 0.350 115/230 AC Printed Circuit Transformers DSW-536 30 D
18.00 0.550 115 AC Printed Circuit Transformers SW-636 30 D
18.00 0.550 115/230 AC Printed Circuit Transformers DSW-636 30 D
18.00 0.550 117 AC Power Transformers P-8613 50 B
18.00 0.560 115/230 AC TransGlobal International (PC Mount) TG10-36 24 A
18.00 0.700 115 AC Printed Circuit Transformers SW-536 30 D
18.00 0.700 115/230 AC Printed Circuit Transformers DSW-536 30 D
18.00 0.750 115 AC Power Transformers * P-8690 48 G
18.00 1.000 115 AC Power Transformers * P-8691 48 G
18.00 1.000 115 AC Power Transformers (Dual Secondary) * P-8684 51 B
18.00 1.000 117 AC Power Transformers P-8671 50 C
18.00 1.100 115 AC Printed Circuit Transformers SW-636 30 D
18.00 1.100 115/230 AC Printed Circuit Transformers DSW-636 30 D
120
Q U I C K S E L E C T I O N G U I D E
White-Rodgers • Emerson Electric Co.
9797 Reavis Road • St. Louis, MO 63123
(314) 865-8799 • Fax (314) 638-2400
Output Output Input Output Catalog Section (transformer type) C.T. STANCOR Pg. Sec.
Voltage Amps Voltage (AC) AC/DC Part No.
18.00 1.120 115/230 AC TransGlobal International (PC Mount) TG20-36 24 A
18.00 1.250 117 AC Power Transformers (Dual Secondary) * PCA-3 51 A
18.00 1.400 115/230 AC TransGlobal International (Chassis Mount) TGC25-36 21 G
18.00 1.500 115 AC Power Transformers * P-8692 48 H
18.00 1.640 115/230 AC TransGlobal International (PC Mount) TG30-36 24 A
18.00 2.000 115 AC Power Transformers * P-8693 48 H
18.00 2.000 115 AC Power Transformers (Dual Secondary) * P-8685 51 B
18.00 2.000 117 AC Power Transformers P-8672 50 C
18.00 2.000 120 DC Power Sources (Desk-Top) STA-6618 15 I
18.00 2.000 120 DC Power Sources (Desk-Top) STA-6618-4 15 I
18.00 2.400 115/230 AC TransGlobal International (Chassis Mount) TGC43-36 21 G
18.00 3.120 115/230 AC TransGlobal International (PC Mount) TG56-36 24 A
18.00 4.000 117 AC Power Transformers P-8673 50 C
18.00 4.400 115/230 AC TransGlobal International (Chassis Mount) TGC80-36 21 G
18.00 6.000 117 AC Power Transformers P-8674 50 C
18.00 7.200 115/230 AC TransGlobal International (Chassis Mount) TGC130-36 21 G
18.00 9.600 115/230 AC TransGlobal International (Chassis Mount) TGC175-36 21 G
18.50 0.080 120 DC Power Sources (Wall Plug-In) STA-3518 14 I
19.00 2.500 117 AC Power Transformers (Dual Secondary) * PCA-4 51 A
20.00 0.038 115 AC Printed Circuit Transformers (Plug-In Series) PPC-7 33 B
20.00 0.050 115/230 AC Power Transformers * P-8500 48 H
20.00 0.055 115 AC Printed Circuit Transformers * SW-220 29 D
20.00 0.055 115/230 AC Printed Circuit Transformers * DSW-220 29 D
20.00 0.060 115/230 AC Printed Circuit Transformers LB-240 27 G
20.00 0.076 115 AC Printed Circuit Transformers (Plug-In Series) PPC-7 33 B
20.00 0.112 115 AC Printed Circuit Transformers (Plug-In Series) PPC-17 33 D
20.00 0.120 115 AC Printed Circuit Transformers * SW-320 29 D
20.00 0.120 115/230 AC Printed Circuit Transformers LB-240 27 G
20.00 0.120 115/230 AC Printed Circuit Transformers * DSW-320 29 D
20.00 0.120 115/230 AC TransGlobal International (PC Mount) * TG2H-20 23 D
20.00 0.150 115/230 AC Printed Circuit Transformers LB-640 27 G
20.00 0.188 115 AC Printed Circuit Transformers (Plug-In Series) PPC-27 33 E
20.00 0.200 115/230 AC Printed Circuit Transformers * LB-420 27 D
20.00 0.224 115 AC Printed Circuit Transformers (Plug-In Series) PPC-17 33 D
20.00 0.225 115/230 AC Printed Circuit Transformers (Plug-In Series) * PPC-28 33 C
20.00 0.250 115/230 AC Printed Circuit Transformers * LB-520 27 D
20.00 0.250 115/230 AC Power Transformers * P-8504 48 H
20.00 0.250 115/230 AC Power Transformers P-8542 50 D
20.00 0.250 115/230 AC TransGlobal International (PC Mount) * TG05-20 23 D
20.00 0.280 120 DC Power Sources (Wall Plug-In) STA-4120 14 I
20.00 0.300 115 AC Printed Circuit Transformers * SW-420 29 D
20.00 0.300 115/230 AC Printed Circuit Transformers * LB-620 27 E
20.00 0.300 115/230 AC Printed Circuit Transformers LB-1240 27 G
20.00 0.300 115/230 AC Printed Circuit Transformers LB-640 27 G
20.00 0.300 115/230 AC Printed Circuit Transformers * DSW-420 29 D
20.00 0.300 115/230 AC Power Transformers * P-8505 48 I
20.00 0.376 115 AC Printed Circuit Transformers (Plug-In Series) PPC-27 33 E
20.00 0.500 115/230 AC Power Transformers * P-8507 48 I
20.00 0.500 115/230 AC TransGlobal International (PC Mount) * TG10-20 23 D
Transformer and Power Supplies
Q U I C K S E L E C T I O N G U I D E
White-Rodgers • Emerson Electric Co.
9797 Reavis Road • St. Louis, MO 63123
(314) 865-8799 • Fax (314) 638-2400 121
Transformer and Power Supplies
Output Output Input Output Catalog Section (transformer type) C.T. STANCOR Pg. Sec.
Voltage Amps Voltage (AC) AC/DC Part No.
20.00 0.600 115/230 AC Printed Circuit Transformers * LB-1220 27 E
20.00 0.600 115/230 AC Printed Circuit Transformers LB-1240 27 G
20.00 0.600 115/230 AC Printed Circuit Transformers * DSW-520 29 D
20.00 0.700 120 AC Power Sources (Wall Plug-In) STA-4820 14 D
20.00 1.000 115 AC Printed Circuit Transformers * SW-620 29 D
20.00 1.000 115 AC Power Transformers P-8564 50 D
20.00 1.000 115/230 AC Printed Circuit Transformers * DSW-620 29 D
20.00 1.000 115/230 AC Power Transformers * P-8508 48 I
20.00 1.000 115/230 AC TransGlobal International (PC Mount) * TG20-20 23 D
20.00 1.000 117 AC Power Transformers * P-8604 49 A
20.00 1.200 115/230 AC Printed Circuit Transformers (Plug-In Series) * PPC-57 33 E
20.00 1.250 115/230 AC TransGlobal International (Chassis Mount) * TGC25-20 21 D
20.00 1.500 115/230 AC TransGlobal International (PC Mount) * TG30-20 23 D
20.00 2.000 115 AC Power Transformers * P-8559 49 A
20.00 2.200 115/230 AC TransGlobal International (Chassis Mount) * TGC43-20 21 D
20.00 2.800 115/230 AC TransGlobal International (PC Mount) * TG56-20 23 D
20.00 4.000 115 AC Power Transformers * P-8560 49 A
20.00 4.000 115 AC Power Transformers P-8566 50 D
20.00 4.000 115/230 AC TransGlobal International (Chassis Mount) * TGC80-20 21 D
20.00 6.500 115/230 AC TransGlobal International (Chassis Mount) * TGC130-20 21 D
20.00 8.800 115/230 AC TransGlobal International (Chassis Mount) * TGC175-20 21 D
24.00 0.023 115 AC Printed Circuit Transformers SW-248 31 A
24.00 0.023 115/230 AC Printed Circuit Transformers DSW-248 31 A
24.00 0.045 115 AC Printed Circuit Transformers * SW-224 30 A
24.00 0.045 115/230 AC Printed Circuit Transformers * DSW-224 30 A
24.00 0.046 115 AC Printed Circuit Transformers SW-248 31 A
24.00 0.046 115/230 AC Printed Circuit Transformers DSW-248 31 A
24.00 0.050 115 AC Printed Circuit Transformers SW-348 31 A
24.00 0.050 115/230 AC Printed Circuit Transformers DSW-348 31 A
24.00 0.050 120 DC Power Sources (Wall Plug-In) STA-3524 15 A
24.00 0.085 117 AC Power Transformers * P-8394 49 B
24.00 0.085 230 AC Power Transformers * P-8720 49 B
24.00 0.100 115 AC Printed Circuit Transformers * SW-324 30 A
24.00 0.100 115 AC Printed Circuit Transformers SW-348 31 A
24.00 0.100 115/230 AC Printed Circuit Transformers * DSW-324 30 A
24.00 0.100 115/230 AC Printed Circuit Transformers DSW-348 31 A
24.00 0.100 115/230 AC TransGlobal International (PC Mount) * TG2H-24 23 E
24.00 0.125 115 AC Printed Circuit Transformers SW-448 31 A
24.00 0.125 115/230 AC Printed Circuit Transformers DSW-448 31 A
24.00 0.167 115/230 AC Printed Circuit Transformers * LB-424 27 E
24.00 0.180 115/230 AC Printed Circuit Transformers (Plug-In Series) * PPC-20 33 D
24.00 0.200 115/230 AC Power Transformers * P-8578 49 C
24.00 0.200 117 AC Power Transformers * P-8395 49 B
24.00 0.200 230 AC Power Transformers * P-8721 49 C
24.00 0.208 115/230 AC Printed Circuit Transformers * LB-524 27 E
24.00 0.210 115/230 AC TransGlobal International (PC Mount) * TG05-24 23 E
24.00 0.250 115 AC Printed Circuit Transformers * SW-424 30 A
24.00 0.250 115 AC Printed Circuit Transformers SW-448 31 A
122
Q U I C K S E L E C T I O N G U I D E
White-Rodgers • Emerson Electric Co.
9797 Reavis Road • St. Louis, MO 63123
(314) 865-8799 • Fax (314) 638-2400
Output Output Input Output Catalog Section (transformer type) C.T. STANCOR Pg. Sec.
Voltage Amps Voltage (AC) AC/DC Part No.
24.00 0.250 115 AC Printed Circuit Transformers SW-548 31 A
24.00 0.250 115/230 AC Printed Circuit Transformers * LB-624 27 F
24.00 0.250 115/230 AC Printed Circuit Transformers * DSW-424 30 A
24.00 0.250 115/230 AC Printed Circuit Transformers DSW-448 31 A
24.00 0.250 115/230 AC Printed Circuit Transformers DSW-548 31 A
24.00 0.250 115/230 AC Power Transformers (Dual Pri./Sec.) P-8615 52 D
24.00 0.300 120 AC Power Sources (Wall Plug-In) STA-4124 15 A
24.00 0.400 115 AC Printed Circuit Transformers SW-648 31 A
24.00 0.400 115/230 AC Printed Circuit Transformers DSW-648 31 A
24.00 0.400 117 AC Power Transformers * P-8396 49 C
24.00 0.400 230 AC Power Transformers * P-8722 49 C
24.00 0.400 230/50HZ AC Power Sources (Wall Plug-In) STAF-2098F 17 F
24.00 0.420 115/230 AC TransGlobal International (PC Mount) * TG10-24 23 E
24.00 0.450 120 AC Power Sources (Wall Plug-In) STA-4824B 15 A
24.00 0.500 115 AC Printed Circuit Transformers * SW-524 30 A
24.00 0.500 115 AC Printed Circuit Transformers SW-548 31 A
24.00 0.500 115/230 AC Printed Circuit Transformers * LB-1224 27 F
24.00 0.500 115/230 AC Printed Circuit Transformers * DSW-524 30 A
24.00 0.500 115/230 AC Printed Circuit Transformers DSW-548 31 A
24.00 0.500 115/230 AC Power Transformers (Dual Pri./Sec.) P-8615 52 D
24.00 0.500 115/230 AC Power Transformers (Dual Pri./Sec.) P-8616 52 D
24.00 0.600 120 DC Power Sources (Wall Plug-In) STA-4824AT 15 B
24.00 0.700 117 AC Power Transformers * P-8397 49 D
24.00 0.700 230 AC Power Transformers * P-8723 49 D
24.00 0.800 115 AC Printed Circuit Transformers * SW-624 30 A
24.00 0.800 115 AC Printed Circuit Transformers SW-648 31 A
24.00 0.800 115/230 AC Printed Circuit Transformers * DSW-624 30 A
24.00 0.800 115/230 AC Printed Circuit Transformers DSW-648 31 A
24.00 0.830 115/230 AC TransGlobal International (PC Mount) * TG20-24 23 E
24.00 1.000 115 AC Power Transformers P-8551 49 A
24.00 1.000 115/230 AC Printed Circuit Transformers (Plug-In Series) * PPC-58 33 E
24.00 1.000 115/230 AC Power Transformers * P-8575 49 D
24.00 1.000 115/230 AC Power Transformers (Dual Pri./Sec.) P-8616 52 D
24.00 1.000 115/230 AC Power Transformers (Dual Pri./Sec.) P-8617 52 D
24.00 1.000 115/230 AC TransGlobal International (Chassis Mount) * TGC25-24 21 E
24.00 1.000 117 AC Power Transformers * P-8661 49 D
24.00 1.000 117 AC Power Transformers P-8605 50 D
24.00 1.000 120 DC Power Sources (Wall Plug-In) STA-5724AT 15 B
24.00 1.000 120 DC Power Sources (Wall Plug-In) STA-5724AT-4 15 B
24.00 1.250 115/230 AC TransGlobal International (PC Mount) * TG30-24 23 E
24.00 1.500 120 DC Power Sources (Desk-Top) STA-6624 15 B
24.00 1.670 120 AC Energy Limiting Transformers 592-9012 65 A
24.00 1.670 120/208/240 AC Energy Limiting Transformers 592-9018 65 A
24.00 1.670 120/240 AC Energy Limiting Transformers 592-9016 65 A
24.00 1.670 208/240 AC Energy Limiting Transformers 592-9017 65 A
24.00 1.670 240 AC Energy Limiting Transformers 592-9013 65 A
24.00 1.800 115/230 AC TransGlobal International (Chassis Mount) * TGC43-24 21 E
24.00 2.000 115 AC Power Transformers P-8694 49 B
24.00 2.000 115/230 AC Power Transformers (Dual Pri./Sec.) P-6377 52 C
Transformer and Power Supplies
Q U I C K S E L E C T I O N G U I D E
White-Rodgers • Emerson Electric Co.
9797 Reavis Road • St. Louis, MO 63123
(314) 865-8799 • Fax (314) 638-2400 123
Transformer and Power Supplies
Output Output Input Output Catalog Section (transformer type) C.T. STANCOR Pg. Sec.
Voltage Amps Voltage (AC) AC/DC Part No.
24.00 2.000 115/230 AC Power Transformers (Dual Pri./Sec.) P-8617 52 D
24.00 2.000 115/230 AC Power Transformers (Dual Pri./Sec.) P-8618 52 D
24.00 2.000 117 AC Power Transformers * P-8662 49 E
24.00 2.330 115/230 AC TransGlobal International (PC Mount) * TG56-24 23 E
24.00 3.300 115/230 AC TransGlobal International (Chassis Mount) * TGC80-24 21 E
24.00 4.000 115/230 AC Power Transformers (Dual Pri./Sec.) P-6378 52 C
24.00 4.000 115/230 AC Power Transformers (Dual Pri./Sec.) P-8618 52 D
24.00 4.000 115/230 AC Power Transformers (Dual Pri./Sec.) P-8619 52 D
24.00 4.000 117 AC Power Transformers * P-8663 49 E
24.00 5.400 115/230 AC TransGlobal International (Chassis Mount) * TGC130-24 21 E
24.00 6.000 117 AC Power Transformers * P-8664 49 E
24.00 7.300 115/230 AC TransGlobal International (Chassis Mount) * TGC175-24 21 E
24.00 8.000 115/230 AC Power Transformers (Dual Pri./Sec.) P-6379 52 C
24.00 8.000 115/230 AC Power Transformers (Dual Pri./Sec.) P-8619 52 D
24.00 8.000 117 AC Power Transformers * P-8665 49 E
24.00 10.000 115 AC Power Transformers * P-8695 49 F
24.00 12.000 117 AC Power Transformers * P-8666 49 F
24.50 0.250 117 AC Power Transformers * P-8607 49 H
25.20 1.000 117 AC Power Transformers P-6469 49 F
25.20 1.000 117 AC Power Transformers * P-8180 49 G
25.20 1.000 230 AC Power Transformers P-8707 49 F
25.20 2.000 115/230 AC Power Transformers * P-8574 49 G
25.20 2.000 117 AC Power Transformers * P-8357 49 G
25.20 2.800 117 AC Power Transformers * P-8388 49 G
25.20 5.000 117 AC Power Transformers * P-8645 49 H
26.00 0.250 117 AC Power Transformers * P-8607 49 H
26.80 1.000 117 AC Power Transformers * P-8609 49 H
27.00 0.028 115 AC Printed Circuit Transformers (Plug-In Series) PPC-4 33 B
27.00 0.056 115 AC Printed Circuit Transformers (Plug-In Series) PPC-4 33 B
27.00 0.084 115 AC Printed Circuit Transformers (Plug-In Series) PPC-14 33 D
27.00 0.168 115 AC Printed Circuit Transformers (Plug-In Series) PPC-14 33 D
27.50 0.250 117 AC Power Transformers * P-8607 49 H
28.00 0.020 115 AC Printed Circuit Transformers SW-256 31 B
28.00 0.020 115/230 AC Printed Circuit Transformers DSW-256 31 B
28.00 0.040 115 AC Printed Circuit Transformers * SW-228 30 B
28.00 0.040 115 AC Printed Circuit Transformers SW-256 31 B
28.00 0.040 115/230 AC Printed Circuit Transformers * DSW-228 30 B
28.00 0.040 115/230 AC Printed Circuit Transformers DSW-256 31 B
28.00 0.045 115 AC Printed Circuit Transformers SW-356 31 B
28.00 0.045 115/230 AC Printed Circuit Transformers LB-256 27 G
28.00 0.045 115/230 AC Printed Circuit Transformers DSW-356 31 B
28.00 0.085 115 AC Printed Circuit Transformers * SW-328 30 B
28.00 0.085 115/230 AC Printed Circuit Transformers * DSW-328 30 B
28.00 0.085 117 AC Power Transformers * P-8600 49 H
28.00 0.090 115 AC Printed Circuit Transformers SW-356 31 B
28.00 0.090 115/230 AC Printed Circuit Transformers LB-256 27 G
28.00 0.090 115/230 AC Printed Circuit Transformers DSW-356 31 B
28.00 0.090 115/230 AC TransGlobal International (PC Mount) * TG2H-28 23 F
28.00 0.100 115/230 AC Printed Circuit Transformers LB-656 27 H
124
Q U I C K S E L E C T I O N G U I D E
White-Rodgers • Emerson Electric Co.
9797 Reavis Road • St. Louis, MO 63123
(314) 865-8799 • Fax (314) 638-2400
Output Output Input Output Catalog Section (transformer type) C.T. STANCOR Pg. Sec.
Voltage Amps Voltage (AC) AC/DC Part No.
28.00 0.110 115 AC Printed Circuit Transformers SW-456 31 B
28.00 0.110 115/230 AC Printed Circuit Transformers DSW-456 31 B
28.00 0.175 117 AC Power Transformers * P-8601 49 I
28.00 0.180 115/230 AC TransGlobal International (PC Mount) * TG05-28 23 F
28.00 0.200 115 AC Printed Circuit Transformers * SW-428 30 B
28.00 0.200 115/230 AC Printed Circuit Transformers LB-1256 27 H
28.00 0.200 115/230 AC Printed Circuit Transformers LB-656 27 H
28.00 0.200 115/230 AC Printed Circuit Transformers * DSW-428 30 B
28.00 0.220 115 AC Printed Circuit Transformers SW-456 31 B
28.00 0.220 115 AC Printed Circuit Transformers SW-556 31 B
28.00 0.220 115/230 AC Printed Circuit Transformers DSW-456 31 B
28.00 0.220 115/230 AC Printed Circuit Transformers DSW-556 31 B
28.00 0.300 117 AC Power Transformers * P-8602 49 I
28.00 0.350 115 AC Printed Circuit Transformers SW-656 31 B
28.00 0.350 115/230 AC Printed Circuit Transformers DSW-656 31 B
28.00 0.360 115/230 AC TransGlobal International (PC Mount) * TG10-28 23 F
28.00 0.400 115/230 AC Printed Circuit Transformers LB-1256 27 H
28.00 0.420 115 AC Printed Circuit Transformers * SW-528 30 B
28.00 0.420 115/230 AC Printed Circuit Transformers * DSW-528 30 B
28.00 0.440 115 AC Printed Circuit Transformers SW-556 31 B
28.00 0.440 115/230 AC Printed Circuit Transformers DSW-556 31 B
28.00 0.700 115 AC Printed Circuit Transformers * SW-628 30 B
28.00 0.700 115 AC Printed Circuit Transformers SW-656 31 B
28.00 0.700 115/230 AC Printed Circuit Transformers * DSW-628 30 B
28.00 0.700 115/230 AC Printed Circuit Transformers DSW-656 31 B
28.00 0.720 115/230 AC TransGlobal International (PC Mount) * TG20-28 23 F
28.00 0.800 117 AC Power Transformers * P-8603 49 I
28.00 0.900 115/230 AC TransGlobal International (Chassis Mount) * TGC25-28 21 F
28.00 1.000 117 AC Power Transformers * P-8667 50 A
28.00 1.060 115/230 AC TransGlobal International (PC Mount) * TG30-28 23 F
28.00 1.500 115/230 AC TransGlobal International (Chassis Mount) * TGC43-28 21 F
28.00 2.000 115/230 AC TransGlobal International (PC Mount) * TG56-28 23 F
28.00 2.000 117 AC Power Transformers * P-8668 50 A
28.00 2.800 115/230 AC TransGlobal International (Chassis Mount) * TGC80-28 21 F
28.00 4.000 117 AC Power Transformers * P-8669 50 A
28.00 4.600 115/230 AC TransGlobal International (Chassis Mount) * TGC130-28 21 F
28.00 6.000 117 AC Power Transformers * P-8670 50 A
28.00 6.250 115/230 AC T

[comments?][Karma: 2 ( + / - )][Link] to comments

Superior Powerstat 2.25 - 5 Amp Models 05/10/2003 at 5:37PM by Randy

The 21 - 22 series POWERSTAT® Variable Transformers are of open construction and are primarily designed for back-of-panel mounting. The rated output for the type 21 series is 5 amperes for constant current loads and 7 amperes for constant impedance loads. For the type 22 series, the rated output is 2.25 amperes for constant current loads and 3.25 amperes for constant impedance loads. The 21 series operates from 120 volt lines and the 22 series operates from 240 volts lines. The taping arrangement permits an output voltage range of zero to line voltage or zero to 17 percent above line voltage. The 21 - 22 series can be operated at any frequency between 50 and 2000 hertz without reduction in allowable output current.

EXCELLENT REGULATION - POWERSTAT® Variable Transformers deliver the desired voltage with only negligible variation in output voltage from no-load to full-load current. Individual regulation curves are shown for all types.
HIGH EFFICIENCY - The watts loss of every POWERSTAT® Variable Transformer is very low in contrast to the inefficient, wasteful control provided by rheostats and other resistive type controllers.
NEGLIGIBLE WAVEFORM DISTORTION - A POWERSTAT® Variable Transformer provides an output voltage which is a faithful and distortionless reproduction of the applied input waveform. This is a required feature of many electronic applications and is a result of superior core and coil design and the use of highest grade silicon steel.
PRECIOUS METAL PLATED COMMUTATOR - A special precious metal plating process produces a commutator surface that withstands greater overloads and maintains a constant contact drop. The plated surface assures smooth performance, long life and increased resistance to corrosion.
NEGLIGIBLE MAINTENANCE - With ordinary care and attention to the operating instructions, the only elements that may require periodic inspection and maintenance are the brushes. Their replacement is infrequently needed because they are made of a special carbon and are of a design that assures proper contact of the brush to the commutator at any setting.
SMOOTH CONTROL - The output voltage of a POWERSTAT® Variable Transformer can be considered continuously adjustable. The voltage between turns is a fraction of a volt and the brush-tap is always in contact with one or more turns of the winding. Adjustment of output voltage can be made to a fraction of a volt.
RUGGED MECHANICAL CONSTRUCTION - All POWERSTAT® Variable Transformers are designed for heavy-duty, trouble-free operation. Rigid inspection at every stage of manufacture gives assurance of a quality-built product. The securely mounted core and coil, extra large aluminum brush heat radiator and durable brush assembly reduce the need for attention or replacement.
LONG LIFE - POWERSTAT® Variable Transformers give reliable performance over extended periods of time even under extreme operating conditions. Materials are constantly being improved to give increased life expectancy.
DUAL INPUT - Most 240 volt POWERSTAT® Variable Transformers have a lower input voltage tap that permits operation from a 120 volt input to obtain an output voltage of 0-280 volts. The output current must be reduced according to the curve in Figure B when the output voltage exceeds 125% of the input voltage.

To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz

[comments?][Karma: 2 ( + / - )][Link] to comments

Superior Powerstat 15-30 amp Models 05/10/2003 at 5:36PM by Randy

The 146 and 246 series POWERSTAT® Variable Transformers are available in single and three phase, manually operated and motor-driven assemblies. The 146 series operates from 120 volt lines and the 246 series from 240 volt lines. The 146 series has a rated output for constant current loads of 30 amperes and the 246 series is rated for 15 amperes. The rated constant impedance load at line voltage for the 146 series units has its rated current output increased to 35 amperes and the 246 series is increased to 19 amperes. These series can be operated at any frequency between 50 and 550 hertz. All models can be connected to deliver an increasing output voltage with either clockwise or counterclockwise knob rotation and have standard dials graduated 0 - 100. The angle of rotation from zero to maximum output voltage is 316 degrees. All units in these series are available with the terminal board enclosed in a metal terminal box. Knockouts in the terminal enclosure permit wiring with cable or conduit. These units are available in two- and three-gang assemblies in either enclosed or open construction. Motor drives are available in standard speeds of 5, 15, 30 or 60 seconds for full range travel.

EXCELLENT REGULATION - POWERSTAT® Variable Transformers deliver the desired voltage with only negligible variation in output voltage from no-load to full-load current. Individual regulation curves are shown for all types.
HIGH EFFICIENCY - The watts loss of every POWERSTAT® Variable Transformer is very low in contrast to the inefficient, wasteful control provided by rheostats and other resistive type controllers.
NEGLIGIBLE WAVEFORM DISTORTION - A POWERSTAT® Variable Transformer provides an output voltage which is a faithful and distortionless reproduction of the applied input waveform. This is a required feature of many electronic applications and is a result of superior core and coil design and the use of highest grade silicon steel.
PRECIOUS METAL PLATED COMMUTATOR - A special precious metal plating process produces a commutator surface that withstands greater overloads and maintains a constant contact drop. The plated surface assures smooth performance, long life and increased resistance to corrosion.
NEGLIGIBLE MAINTENANCE - With ordinary care and attention to the operating instructions, the only elements that may require periodic inspection and maintenance are the brushes. Their replacement is infrequently needed because they are made of a special carbon and are of a design that assures proper contact of the brush to the commutator at any setting.
SMOOTH CONTROL - The output voltage of a POWERSTAT® Variable Transformer can be considered continuously adjustable. The voltage between turns is a fraction of a volt and the brush-tap is always in contact with one or more turns of the winding. Adjustment of output voltage can be made to a fraction of a volt.
RUGGED MECHANICAL CONSTRUCTION - All POWERSTAT® Variable Transformers are designed for heavy-duty, trouble-free operation. Rigid inspection at every stage of manufacture gives assurance of a quality-built product. The securely mounted core and coil, extra large aluminum brush heat radiator and durable brush assembly reduce the need for attention or replacement.
LONG LIFE - POWERSTAT® Variable Transformers give reliable performance over extended periods of time even under extreme operating conditions. Materials are constantly being improved to give increased life expectancy.
DUAL INPUT - Most 240 volt POWERSTAT® Variable Transformers have a lower input voltage tap that permits operation from a 120 volt input to obtain an output voltage of 0-280 volts. The output current must be reduced according to the curve in Figure B when the output voltage exceeds 125% of the input voltage.

To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz

[comments?][Karma: 2 ( + / - )][Link] to comments

Superior Powerstat 10-22 Amp Models 05/10/2003 at 5:35PM by Randy

The 136B - 236B POWERSTAT® Variable Transformer series are available in single and three phase, manually operated and motor driven assemblies. The 136B series operates from 120 volt lines and the 236B series operates from 240 volt lines. The 126B series has a rated output for constant current loads of 22 amperes and the 236B is rated at 10 amperes. The constant impedance load output current at line voltage for the 126B series is 28 amperes and for the 236B series it is 13 amperes. These series operates at any frequency between 50 and 2000 hertz. The shaft on the unit can be adjusted for general utility or back-of-panel mounting. Manually operated units have standard dials graduated 0 - 100. Terminal connections permit increasing the output voltage with either a clockwise or counterclockwise rotation of the knob. The angle of rotation from zero to maximum output voltage is 316 degrees. Plug in units are available and have the same ratings as open construction units but offer the convenience of input cord-plugs, fuses and output receptacles housed in a cast aluminum terminal enclosure. They can be converted to limit the output voltage to line voltage. These units are available in two- and three gang assemblies in either enclosed or open construction.

EXCELLENT REGULATION - POWERSTAT® Variable Transformers deliver the desired voltage with only negligible variation in output voltage from no-load to full-load current. Individual regulation curves are shown for all types.
HIGH EFFICIENCY - The watts loss of every POWERSTAT® Variable Transformer is very low in contrast to the inefficient, wasteful control provided by rheostats and other resistive type controllers.
NEGLIGIBLE WAVEFORM DISTORTION - A POWERSTAT® Variable Transformer provides an output voltage which is a faithful and distortionless reproduction of the applied input waveform. This is a required feature of many electronic applications and is a result of superior core and coil design and the use of highest grade silicon steel.
PRECIOUS METAL PLATED COMMUTATOR - A special precious metal plating process produces a commutator surface that withstands greater overloads and maintains a constant contact drop. The plated surface assures smooth performance, long life and increased resistance to corrosion.
NEGLIGIBLE MAINTENANCE - With ordinary care and attention to the operating instructions, the only elements that may require periodic inspection and maintenance are the brushes. Their replacement is infrequently needed because they are made of a special carbon and are of a design that assures proper contact of the brush to the commutator at any setting.
SMOOTH CONTROL - The output voltage of a POWERSTAT® Variable Transformer can be considered continuously adjustable. The voltage between turns is a fraction of a volt and the brush-tap is always in contact with one or more turns of the winding. Adjustment of output voltage can be made to a fraction of a volt.
RUGGED MECHANICAL CONSTRUCTION - All POWERSTAT® Variable Transformers are designed for heavy-duty, trouble-free operation. Rigid inspection at every stage of manufacture gives assurance of a quality-built product. The securely mounted core and coil, extra large aluminum brush heat radiator and durable brush assembly reduce the need for attention or replacement.
LONG LIFE - POWERSTAT® Variable Transformers give reliable performance over extended periods of time even under extreme operating conditions. Materials are constantly being improved to give increased life expectancy.
DUAL INPUT - Most 240 volt POWERSTAT® Variable Transformers have a lower input voltage tap that permits operation from a 120 volt input to obtain an output voltage of 0-280 volts. The output current must be reduced according to the curve in Figure B when the output voltage exceeds 125% of the input voltage.

To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz

[comments?][Karma: 2 ( + / - )][Link] to comments

Superior Powerstat 7.5 - 15 smp Models 05/10/2003 at 5:34PM by Randy

The 126 - 226 POWERSTAT® Variable Transformer Series is offered in single and three phase, manually - operated and motor - driven assemblies. The 126 series operates from a 120 volt line and the 226 series type operates from a 240 volt line. The rated output for constant current loads is 15 amperes for the 126 series and 7.5 amperes for the 226 series. For a constant impedance load the maximum rated output current at line voltage is increased to 20 amperes for the 126 series and to 10 amperes for the 226 series. These units can be operated at any frequency between 50 and 2000 hertz. These units have a removable, solid-metal shaft that can be adjusted for either general utility or back-of-panel mounting. The dial is graduated at 1 - 100. Terminal connections permit increasing output voltage with either clockwise or counterclockwise rotation of the knob. Rotation angle from zero to maximum output voltage is 320 degrees. These units are available as a plug-in model and have the same ratings but offer the convenience of input cord-plugs, fuses and output receptacles housed in cast aluminum terminal enclosure. These units can be converted to limit the output voltage to line voltage. Available in two and three-gang assemblies the 126 and 226 series can be either enclosed or open construction models. Except for the plug- in models the 126 and 226 series are available with motor drives in standard speeds of 5, 15, 30 or 60 seconds for full range travel.

EXCELLENT REGULATION - POWERSTAT® Variable Transformers deliver the desired voltage with only negligible variation in output voltage from no-load to full-load current. Individual regulation curves are shown for all types.
HIGH EFFICIENCY - The watts loss of every POWERSTAT® Variable Transformer is very low in contrast to the inefficient, wasteful control provided by rheostats and other resistive type controllers.
NEGLIGIBLE WAVEFORM DISTORTION - A POWERSTAT® Variable Transformer provides an output voltage which is a faithful and distortionless reproduction of the applied input waveform. This is a required feature of many electronic applications and is a result of superior core and coil design and the use of highest grade silicon steel.
PRECIOUS METAL PLATED COMMUTATOR - A special precious metal plating process produces a commutator surface that withstands greater overloads and maintains a constant contact drop. The plated surface assures smooth performance, long life and increased resistance to corrosion.
NEGLIGIBLE MAINTENANCE - With ordinary care and attention to the operating instructions, the only elements that may require periodic inspection and maintenance are the brushes. Their replacement is infrequently needed because they are made of a special carbon and are of a design that assures proper contact of the brush to the commutator at any setting.
SMOOTH CONTROL - The output voltage of a POWERSTAT® Variable Transformer can be considered continuously adjustable. The voltage between turns is a fraction of a volt and the brush-tap is always in contact with one or more turns of the winding. Adjustment of output voltage can be made to a fraction of a volt.
RUGGED MECHANICAL CONSTRUCTION - All POWERSTAT® Variable Transformers are designed for heavy-duty, trouble-free operation. Rigid inspection at every stage of manufacture gives assurance of a quality-built product. The securely mounted core and coil, extra large aluminum brush heat radiator and durable brush assembly reduce the need for attention or replacement.
LONG LIFE - POWERSTAT® Variable Transformers give reliable performance over extended periods of time even under extreme operating conditions. Materials are constantly being improved to give increased life expectancy.
DUAL INPUT - Most 240 volt POWERSTAT® Variable Transformers have a lower input voltage tap that permits operation from a 120 volt input to obtain an output voltage of 0-280 volts. The output current must be reduced according to the curve in Figure B when the output voltage exceeds 125% of the input voltage.

To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz

[comments?][Karma: 2 ( + / - )][Link] to comments

Superior Powerstat 5-12 amp Models 05/10/2003 at 5:33PM by Randy

The 117C series operates from a 120 volt line and the 217C series operates from a 240 volt line. These models both feature POWERKITE coils. The rated output for constant current loads is 10 amperes for the 117C series and 3.6 amperes for the 217C series. For a constant impedance load the maximum rated output current at line voltage is increased to 13 amperes for the 117C series and 5 amperes for the 217C series. Single, manually operated units have both 3 - hole and 4 - hole mounting arrangements; all others have the 4 - hole mounting. This series can be operated at 60 to 1500 hertz, without reduction in allowable output current. Cord and plug models of the 116C series have dials graduated in volts. Open construction models have a letter U suffix in the type number and have the shaft extending from the base end of the assembly for panel mounting. Knobs can also be placed at the radiator end of the assemblies for general utility mounting because the shafts are removable. All plug-in models have input cord-plug sets, output receptacles, switches and fuses and are connected for clockwise knob rotation. All models can be changed in the field to provide increasing output voltage with counterclockwise knob rotation. Motor driven POWERSTAT® Variable Transformers have a letter M prefix in the type number. When ordering, they type number should be prefixed with the desired speed in seconds. For example: 5M117CT.

EXCELLENT REGULATION - POWERSTAT® Variable Transformers deliver the desired voltage with only negligible variation in output voltage from no-load to full-load current. Individual regulation curves are shown for all types.
HIGH EFFICIENCY - The watts loss of every POWERSTAT® Variable Transformer is very low in contrast to the inefficient, wasteful control provided by rheostats and other resistive type controllers.
NEGLIGIBLE WAVEFORM DISTORTION - A POWERSTAT® Variable Transformer provides an output voltage which is a faithful and distortionless reproduction of the applied input waveform. This is a required feature of many electronic applications and is a result of superior core and coil design and the use of highest grade silicon steel.
PRECIOUS METAL PLATED COMMUTATOR - A special precious metal plating process produces a commutator surface that withstands greater overloads and maintains a constant contact drop. The plated surface assures smooth performance, long life and increased resistance to corrosion.
NEGLIGIBLE MAINTENANCE - With ordinary care and attention to the operating instructions, the only elements that may require periodic inspection and maintenance are the brushes. Their replacement is infrequently needed because they are made of a special carbon and are of a design that assures proper contact of the brush to the commutator at any setting.
SMOOTH CONTROL - The output voltage of a POWERSTAT® Variable Transformer can be considered continuously adjustable. The voltage between turns is a fraction of a volt and the brush-tap is always in contact with one or more turns of the winding. Adjustment of output voltage can be made to a fraction of a volt.
RUGGED MECHANICAL CONSTRUCTION - All POWERSTAT® Variable Transformers are designed for heavy-duty, trouble-free operation. Rigid inspection at every stage of manufacture gives assurance of a quality-built product. The securely mounted core and coil, extra large aluminum brush heat radiator and durable brush assembly reduce the need for attention or replacement.
LONG LIFE - POWERSTAT® Variable Transformers give reliable performance over extended periods of time even under extreme operating conditions. Materials are constantly being improved to give increased life expectancy.
DUAL INPUT - Most 240 volt POWERSTAT® Variable Transformers have a lower input voltage tap that permits operation from a 120 volt input to obtain an output voltage of 0-280 volts. The output current must be reduced according to the curve in Figure B when the output voltage exceeds 125% of the input voltage.

To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz

[comments?][Karma: 2 ( + / - )][Link] to comments

Superior Powerstat 3.5 - 10 amp Models 05/10/2003 at 5:32PM by Randy

The 116C series operates from a 120 volt line and the 216C series operates from a 240 volt line. These models both feature POWERKITE coils. The rated output for constant current loads is 10 amperes for the 116C series and 3.6 amperes for the 216C series. For a constant impedance load the maximum rated output current at line voltage is increased to 13 amperes for the 116C series and 5 amperes for the 216C series. Single, manually operated units have both 3 - hole and 4 - hole mounting arrangements; all others have the 4 - hole mounting. This series can be operated at 50 to 1500 hertz, without reduction in allowable output current. Cord and plug models of the 116C series have dials graduated in volts. Other single units of the 116C - 216C series and all ganged units have dials graduated 0 - 100. The angle of rotation from zero to maximum voltage is 317.5 degrees. Open construction models have a letter U suffix in the type number and have the shaft extending from the base end of the assembly for panel mounting. Knobs can also be placed at the radiator end of the assemblies for general utility mounting because the shafts are removable. All plug-in models have input cord-plug sets, output receptacles, switches and fuses and are connected for clockwise knob rotation. All models can be changed in the field to provide increasing output voltage with counterclockwise knob rotation. Motor driven POWERSTAT® Variable Transformers have a letter M prefix in the type number. When ordering, they type number should be prefixed with the desired speed in seconds. For example: 5M116CT.

EXCELLENT REGULATION - POWERSTAT® Variable Transformers deliver the desired voltage with only negligible variation in output voltage from no-load to full-load current. Individual regulation curves are shown for all types.
HIGH EFFICIENCY - The watts loss of every POWERSTAT® Variable Transformer is very low in contrast to the inefficient, wasteful control provided by rheostats and other resistive type controllers.
NEGLIGIBLE WAVEFORM DISTORTION - A POWERSTAT® Variable Transformer provides an output voltage which is a faithful and distortionless reproduction of the applied input waveform. This is a required feature of many electronic applications and is a result of superior core and coil design and the use of highest grade silicon steel.
PRECIOUS METAL PLATED COMMUTATOR - A special precious metal plating process produces a commutator surface that withstands greater overloads and maintains a constant contact drop. The plated surface assures smooth performance, long life and increased resistance to corrosion.
NEGLIGIBLE MAINTENANCE - With ordinary care and attention to the operating instructions, the only elements that may require periodic inspection and maintenance are the brushes. Their replacement is infrequently needed because they are made of a special carbon and are of a design that assures proper contact of the brush to the commutator at any setting.
SMOOTH CONTROL - The output voltage of a POWERSTAT® Variable Transformer can be considered continuously adjustable. The voltage between turns is a fraction of a volt and the brush-tap is always in contact with one or more turns of the winding. Adjustment of output voltage can be made to a fraction of a volt.
RUGGED MECHANICAL CONSTRUCTION - All POWERSTAT® Variable Transformers are designed for heavy-duty, trouble-free operation. Rigid inspection at every stage of manufacture gives assurance of a quality-built product. The securely mounted core and coil, extra large aluminum brush heat radiator and durable brush assembly reduce the need for attention or replacement.
LONG LIFE - POWERSTAT® Variable Transformers give reliable performance over extended periods of time even under extreme operating conditions. Materials are constantly being improved to give increased life expectancy.
DUAL INPUT - Most 240 volt POWERSTAT® Variable Transformers have a lower input voltage tap that permits operation from a 120 volt input to obtain an output voltage of 0-280 volts. The output current must be reduced according to the curve in Figure B when the output voltage exceeds 125% of the input voltage.

To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz

[comments?][Karma: 2 ( + / - )][Link] to comments

Superior Supercon Connectors 05/10/2003 at 5:30PM by Randy

SUPERCON® Electrical Connectors incorporate many advanced engineering features designed to provide safe, rapid and positive panel board connections. Single conductor socket and pin type plugs and receptacles are offered in 25, 50, 100 and 250 Amp capacities. The 25, 50 and 100 Amp types are rated 125-250 VAC or DC current interrupting, 600 V unenergized connect or disconnect use only; 250 Amp types are rated 600 V unenergized connect or disconnect use only. The 25, 50 and 100 Amp types are CSA certified under file No. LR-17812.

PLUGS -Plugs have a unique functionally designed grip for handling ease and convenience. The variety of red, white, blue, yellow, black or green colors permits wider latitude in patch board distribution layouts. Wiring connection to the same plug can be either soldered or solder-less. Cable fastening screws are provided which permit a range of cable sizes to be accommodated by the plug. All plug grips are of a simple, two-piece threaded construction for quick assembly.

RECEPTACLES - Receptacles have color-matched nylon caps and bodies. All plastic parts of a receptacle are molded through in the same color to permit more rapid and accurate circuit identification on both the front and back of the panel when installed. Wiring connections are made to a threaded stud by wire wraparound, by lug or bus bar connection.

100 AMPERE TYPES
COLOR SOCKET
RECEPTACLE PIN
PLUG PIN
RECEPTACLE SOCKET
PLUG
BLACK RS100GB PP100GB RP100GB PS100GB
YELLOW RS100GY PP100GY RP100GY PS100GY
RED RS100GR PP100GR RP100GR PS100GR
BLUE RS100GBL PP100GBL RP100GBL PS100GBL
GREEN RS100GGN PP100GGN RP100GGN PS100GGN
WHITE RS100GWT PP100GWT RP100GWT PS100GWT
SUPERCON® Electrical Connectors incorporate many advanced engineering features designed to provide safe, rapid and positive panel board connections. Single conductor socket and pin type plugs and receptacles are offered in 25, 50, 100 and 250 Amp capacities. The 25, 50 and 100 Amp types are rated 125-250 VAC or DC current interrupting, 600 V unenergized connect or disconnect use only; 250 Amp types are rated 600 V unenergized connect or disconnect use only. The 25, 50 and 100 Amp types are CSA certified under file No. LR-17812.

PLUGS -Plugs have a unique functionally designed grip for handling ease and convenience. The variety of red, white, blue, yellow, black or green colors permits wider latitude in patch board distribution layouts. Wiring connection to the same plug can be either soldered or solder-less. Cable fastening screws are provided which permit a range of cable sizes to be accommodated by the plug. All plug grips are of a simple, two-piece threaded construction for quick assembly.

RECEPTACLES - Receptacles have color-matched nylon caps and bodies. All plastic parts of a receptacle are molded through in the same color to permit more rapid and accurate circuit identification on both the front and back of the panel when installed. Wiring connections are made to a threaded stud by wire wraparound, by lug or bus bar connection.

25 AMPERE TYPES
COLOR SOCKET
RECEPTACLE PIN
PLUG PIN
RECEPTACLE SOCKET
PLUG
BLACK RS25GB PP25GB RP25GB PS25GB
YELLOW RS25GY PP25GY RP25GY PS25GY
RED RS25GR PP25GR RP25GR PS25GR
BLUE RS25GBL PP25GBL RP25GBL PS25GBL
GREEN RS25GGN PP25GGN RP25GGN PS25GGN
WHITE RS25GWT PP25GWT RP25GWT PS25GWT
SUPERCON® Electrical Connectors incorporate many advanced engineering features designed to provide safe, rapid and positive panel board connections. Single conductor socket and pin type plugs and receptacles are offered in 25, 50, 100 and 250 Amp capacities. The 25, 50 and 100 Amp types are rated 125-250 VAC or DC current interrupting, 600 V unenergized connect or disconnect use only; 250 Amp types are rated 600 V unenergized connect or disconnect use only. The 25, 50 and 100 Amp types are CSA certified under file No. LR-17812.

PLUGS -Plugs have a unique functionally designed grip for handling ease and convenience. The variety of red, white, blue, yellow, black or green colors permits wider latitude in patch board distribution layouts. Wiring connection to the same plug can be either soldered or solder-less. Cable fastening screws are provided which permit a range of cable sizes to be accommodated by the plug. All plug grips are of a simple, two-piece threaded construction for quick assembly.

RECEPTACLES - Receptacles have color-matched nylon caps and bodies. All plastic parts of a receptacle are molded through in the same color to permit more rapid and accurate circuit identification on both the front and back of the panel when installed. Wiring connections are made to a threaded stud by wire wraparound, by lug or bus bar connection.

250 AMPERE TYPES
COLOR SOCKET
RECEPTACLE PIN
PLUG PIN
RECEPTACLE SOCKET
PLUG
BLACK RS250GB PP250GB RP250GB PS250GB
YELLOW RS250GY PP250GY RP250GY PS250GY
RED RS250GR PP250GR RP250GR PS250GR
BLUE RS250GBL PP250GBL RP250GBL PS250GBL
GREEN RS250GGN PP250GGN RP250GGN PS250GGN
WHITE RS250GWT PP250GWT RP250GWT PS250GWT
SUPERCON® Electrical Connectors incorporate many advanced engineering features designed to provide safe, rapid and positive panel board connections. Single conductor socket and pin type plugs and receptacles are offered in 25, 50, 100 and 250 Amp capacities. The 25, 50 and 100 Amp types are rated 125-250 VAC or DC current interrupting, 600 V unenergized connect or disconnect use only; 250 Amp types are rated 600 V unenergized connect or disconnect use only. The 25, 50 and 100 Amp types are CSA certified under file No. LR-17812.

PLUGS -Plugs have a unique functionally designed grip for handling ease and convenience. The variety of red, white, blue, yellow, black or green colors permits wider latitude in patch board distribution layouts. Wiring connection to the same plug can be either soldered or solder-less. Cable fastening screws are provided which permit a range of cable sizes to be accommodated by the plug. All plug grips are of a simple, two-piece threaded construction for quick assembly.

RECEPTACLES - Receptacles have color-matched nylon caps and bodies. All plastic parts of a receptacle are molded through in the same color to permit more rapid and accurate circuit identification on both the front and back of the panel when installed. Wiring connections are made to a threaded stud by wire wraparound, by lug or bus bar connection.

50 AMPERE TYPES
COLOR SOCKET
RECEPTACLE PIN
PLUG PIN
RECEPTACLE SOCKET
PLUG
BLACK RS50GB PP250GB RP50GB PS50GB
YELLOW RS50GY PP5oGY RP50GY PS50GY
RED RS50GR PP50GR RP50GR PS50GR
BLUE RS50GBL PP50GBL RP50GBL PS50GBL
GREEN RS50GGN PP50GGN RP50GGN PS50GGN
WHITE RS50GWT PP50GWT RP50GWT PS50GWT
To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz

[comments?][Karma: 2 ( + / - )][Link] to comments

Superior Binding Posts BP30/31 Series 05/10/2003 at 5:22PM by Randy

Double Assembly 5-WAY® Binding Posts are designed for faster, more accurate mounting on 3/4-inch (19mm) centers. Rated for 30 amps, 1000 V working. Conventional miniature, standard, and larger stud types have panel insulating parts in black only. Thumbnuts are available in color combinations of red and black, black and black, and red and red. Plastic insulating parts have the same characteristics as single types. Metal parts are available in gold, nickel or tin-plated brass parts. Double assembly types are available in single packs or in 10-quantity bulk packs. All are Underwriters Laboratories recognized components.

Thumbnuts Plating
on Brass
Parts TYPE* Max. Amps Insulator
Color
Design Colors
Standard (#8-32 UNC-2A Stud)
Hex Black & Black Gold
Nickle
Tin BP30-2BB
BP30-2BBN
BP30-2BBT 30 Black
Red & Red Gold
Nickle
Tin BP30-2RR
BP30-2RRN
BP30-2RRT
Black & Red Gold
Nickle
Tin BP30-2BR
BP30-2BRN
BP30-2BRT
Large Stud (#10-32 UNC-2A Stud)
Hex Black & Black Gold
Nickle
Tin BP30-2BB10
BP30-2BB10N
BP30-2BB10T 30 Black
Red & Red Gold
Nickle
Tin BP30-2RR10
BP30-2RR10N
BP30-2RR10T
Black & Red Gold
Nickle
Tin BP30-2BR10
BP30-2BR10N
BP30-2BR10T

* Order single pack quantities by adding suffix "-1 PKG", for example BP30-2BB-1 PKG;
order bulk pack quantitiesby adding suffix "-B PKG", for example BP30-2BB-B PKG.

BP30 Single Series 5-WAY® Binding Posts have positive-stop captive thumbnuts that allow space to make connections yet reduce the likelihood of accidentally contacting current carrying parts. The BP30 single binding post series are made of nylon plastic per MIL-P20693A, Type IV. Current carrying parts are gold, nickel, or tin plated brass for improved conductivity and corrosion resistance. Metal parts are recessed for user and instrument protection and none touch the mounting panel. The BP30 series uses Standard Hex Nut Type - Rated for 30A, 1000V working. Uses #8-32 stud and nuts. Can be ordered in single packs or 100-quantity bulk packs. They are Underwriters Laboratories recognized components.

Standard Hex Nut Type**
BP30R Suffix R=Red Color
BP30WT Suffix WT=White Color
BP30BL Suffix BL=Blue Color
BP30Y Suffix Y=Yellow Color
BP30B Suffix B=Black Color
BP30GN Suffix GN=Green Color
**Type numbers are given are for binding posts with gold plated brass parts.

Additional Selections / Ordering Options
For nickel plated brass parts add suffix N, for example, BP30GN (nickel).
For tin plated brass parts add suffix T, for example BP30GNT (tin).
To order single pack quantities by adding suffix "-1 PKG", for example BP30R-1PKG.
To order bulk pack quantities by adding suffix "-B PKG",for example BP30R-B PKG.

2
Standard and Miniature Single Assembly
5-WAY® Binding Posts
5-WAY® Binding Posts have positive-stop captive
thumbnuts that allow space to make connections
yet reduce the likelihood of accidentally contacting
current carrying parts. They are available in red,
white, blue, yellow, black and green. BP31 fluted
nut types have insulating parts of Lexan® polycarbonate
resin which has a higher DC insulation resistance
at all operating temperatures and significantly
lower capacitance which provides greater
resistance to high frequency leakage effects. All
others have nylon plastic per MIL-P20693A, Type
IV. Current carrying parts are gold, nickel or tin
plated brass for improved conductivity and corrosion
resistance. Metal parts are recessed for user
and instrument protection and none touch the
mounting panel. All are available in single packs or
100-quantity bulk packs. They are Underwriters
Laboratories recognized components.
Standard Hex Nut and Fluted Nut Types - Rated
for 30 A, 1000 V working.
Miniature Fluted Nut Types - Rated for 15A,
1000 V working.
Standard Standard Miniature Color Plating on
Hex Nut Fluted Nut Fluted Nut Plastic Brass
Type** Type** Type** Parts Parts
BP30R BP31R BP21R Red Gold
BP30WT BP31WT BP21WT White Gold
BP30BL BP31BL BP21BL Blue Gold
BP30Y BP31Y BP21Y Yellow Gold
BP30B BP31B BP21B Black Gold
BP30GN BP31DG BP21GN Green Gold
** Type numbers given are for binding posts with gold plated brass parts. For nickel plated brass parts add
suffix N, for tin plated brass parts add suffix T; for example, BP30GNN (nickel) or BP30GNT (tin). Order
single pack quantities by adding suffix “-1 PKG”, for example BP21R-1 PKG; order bulk pack quantities
by adding suffix “-B PKG”, for example BP21R-B PKG.
TYPES BP30 and BP31 DIMENSIONS
TYPE BP21 DIMENSIONS
*Lexan is a General Electric Trademark
BP30GN
BP31R
BP21B
3
Larger Stud Single Assembly
5-WAY® Binding Posts
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
Plug-in for standard
banana plug.
Clip-lead to
shaft.
Wire looped
around shaft and
clamped.
Wire clamped
through center
hole.
Clamped spade
lug connection.
1.
2.
3.
4.
5.
Larger stud single assembly types have the same
features as types described on page 2 but have a
larger #10-32 stud for behind the panel connections.
Grounding type is made of polished nickel plated
brass.
Larger Stud Hex Nut and Fluted Nut Types -
Rated for 30A, 1000 V working.
All Metal Grounding Type BP30GP10 - For making
rapid connections to ground.
Larger Stud Larger Stud Color of Plating
Hex Nut Fluted Nut Plastic On Brass
Type** Type** Parts Parts
BP30-10R BP31-10R Red Gold
BP30-10WT BP31-10WT White Gold
BP30-10BL BP31-10BL Blue Gold
BP30-10Y BP31-10Y Yellow Gold
BP30-10B BP31-10B Black Gold
BP30-10GN BP31-10DG Green Gold
BP30GP10 N/A N/A Nickel
** Type numbers given are for larger stud binding posts with gold plated
brass parts, except BP30GP10 which is nickel plated. For nickel plated
brass parts add suffix N, for tin plated brass parts add suffix T; for
example, PB30-10GNN (nickel) or BP30-10GNT (tin). Order single
pack quantities by adding suffix “-1 PKG”, for example BP30-10B-1
PKG; order bulk pack quantities by adding suffix” -B PKG”, for example
BP30-10B-B PKG.
BP31-10R
BP30-10GN
BP30GP10
TYPES BP30-10 and BP31-10 DIMENSIONS
TYPE BP30GP10 DIMENSIONS
4
Standard, Miniature and Larger Stud Double Assembly
5-WAY® Binding Posts
Double Assembly 5-WAY® Binding Posts are
designed for faster, more accurate mounting on
3/4-inch (19mm) centers. Conventional miniature,
standard and larger stud types have panel insulating
parts in black only. Thumbnuts are available in
color combinations of red and black, black and black
and red and red. Plastic insulating parts have the
same characteristics as single types. Metal parts
are available in gold, nickel or tin plated brass parts.
Double assembly types are available in single packs
or in 10-quantity bulk packs. All are Underwriters
Laboratories recognized components.
Standard Hex Nut and Fluted Nut Types - Rated
for 30 A, 1000 V working.
Miniature Fluted Nut Types - Rated for 15A,
1000 V working.
Thumbnuts Plating
on Brass
Parts
TYPE* Max.
Amps
Insulator
Color Design Colors
Miniature (#6-32 UNC-2A Stud)
Fluted
Black & Black
Gold
Ni ckel
Tin
BP21-2BB
BP21-2BBN
BP21-2BBT
15 Black Red & Red
Gold
Ni ckel
Tin
BP21-2RR
BP21-2RRN
BP21-2RRT
Black & Red
Gold
Ni ckel
Tin
BP21-2BR
BP21-2BRN
BP21-2BRT
Standard (#8-32 UNC-2A Stud)
Hex
Black & Black
Gold
Ni ckel
Tin
BP30-2BB
BP30-2BBN
BP30-2BBT
30 Black Red & Red
Gold
Ni ckel
Tin
BP30-2RR
BP30-2RRN
BP30-2RRT
Black & Red
Gold
Ni ckel
Tin
BP30-2BR
BP30-2BRN
BP30-2BRT
Fluted
Black & Black
Gold
NIckel
Tin
BP31-2BB
BP31-2BBN
BP31-2BBT
30 Black Red & Red
Gold
NIckel
Tin
BP31-2RR
BP31-2RRN
BP31-2RRT
Black & Red
Gold
NIckel
Tin
BP31-2BR
BP31-2BRN
BP31-2BRT
Larger Stud (#10-32 UNF-2A Stud)
Hex
Black & Black
Gold
NIckel
Tin
BP30-2BB10
BP30-2BB10N
BP30-2BB10T
30 Black Red & Red
Gold
NIckel
Tin
BP30-2RR10
BP30-2RR10N
BP30-2RR10T
Black & Red
Gold
NIckel
Tin
BP30-2BR10
BP30-2BR10N
BP30-2BR10T
Fluted
Black & Black
Gold
NIckel
Tin
BP31-2BB10
BP31-2BB10N
BP31-2BB10T
30 Black Red & Red
Gold
NIckel
Tin
BP31-2RR10
BP31-2RR10N
BP31-2RR10T
Black & Red
Gold
NIckel
Tin
BP31-2BR10
BP31-2BR10N
BP31-2BR10T
* Order single pack quantities by adding suffix “-1 PKG”, for example BP30-2BB-1 PKG;
order bulk pack quantities by adding suffix “-B PKG”, for example BP30-2BB-B PKG.
5
TYPE BP21-2BR DIMENSIONS
TYPE BP30-2BR DIMENSIONS
BP30-2BR
Standard, Miniature and Larger Stud Double Assembly
5-WAY® Binding Posts
BP30-2BR10
TYPE BP30-2BR10 DIMENSIONS
BP21-2BR
6
Custom Color Ring
5-WAY® Binding Posts
All cataloged Custom Color Ring Series types have
neutral gray plastic insulating parts. Single assembly
types have thumbnut-imbedded rings in red,
white, blue, yellow, black or green plastic while
double assembly types have thumbnut color rings
in black-red only. All are available with current carrying
parts in gold, nickel or tin plated brass. BP31
Series fluted nut types have insulating parts molded
of Lexan polycarbonate resin which has a higher
DC insulation resistance at all operating temperatures
and significantly lower capacitance which provides
greater resistance to high frequency leakage
effects. All others have nylon plastic per MIL-P-
20693A, Type IV. All types with “-10” in the suffix
have larger 10-32 studs for making behind the panel
connections. Contingent upon minimum quantity
requirements, insulating part color can be customized.
Inquiries are invited. Single assembly types
are available in single packs or 100-quantity bulk
packs; double assembly types are available in single
packs or 10-quantity bulk packs. They are Underwriters
Laboratories recognized components.
Single Assembly Standard Hex Nut and Fluted
Nut Types - Rated for 30 A, 1000 V working.
Single Assembly Miniature Fluted Nut Types -
Rated for 15A, 1000 V working.
Double Assembly Standard Hex Nut and Fluted
Nut Types - Rated for 30 A, 1000 V working.
Double Assembly Miniature Fluted Nut Types -
Rated for 15A, 1000 V working.
SINGLE ASSEMBLY TYPES
Plating Thread
Type† Description On Brass Size
BP21GY1* Miniature Fluted Nut Gold 6-32
BP30GY1* Standard Hex Nut Gold 8-32
BP31GY1** Standard Fluted Nut Gold 8-32
BP30GY1-10* Standard Hex Nut Gold 10-32
BP31GY1-10** Standard Fluted Nut Gold 10-32
DOUBLE ASSEMBLY TYPES
BP21GY1-2BR Miniature Fluted Nut Gold 6-32
BP30GY1-2BR Standard Hex Nut Gold 8-32
BP31GY1-2BR Standard Fluted Nut Gold 8-32
BP30GY1-2BR10 Standard Hex Nut Gold 10-32
BP31GY1-2BR10 Standard Fluted Nut Gold 10-32
* Enter desired ring color code: R (red), B (black), BL (blue), GN (green),
WT (white), Y (yellow).
** Enter desired ring color code: R (red), B (black), BL (blue), DG
(green), WT (white), Y (yellow).
† Type numbers given are for binding posts with gold plated brass
parts. For nickel plated brass parts add suffix N, for tin plated brass
parts add suffix T; for example, BP30GY1RN (nickel) or BP30GY1RT
(tin). Order single pack quantities by adding suffix “-1 PKG”, for example
BP21GY1R-1 PKG; order bulk pack quantities by adding suffix
“-B PKG”, for example BP21GY1R-B PKG.
See pages 2, 3, 4 and 5 for
complete outline dimensions
7
SUPERCON®
Electrical Connectors
SUPERCON® Electrical Connectors incorporate
many advanced engineering features designed to
provide safe, rapid and positive panelboard connections.
Single conductor socket and pin type plugs
and receptacles are offered in 25, 50, 100 and 250
Amp capacities.
The 25, 50 and 100 Amp types are rated 125-250
VAC or DC current interrupting, 600 V unenergized
connect or disconnect use only; 250 Amp types are
rated 600 V unenergized connect or disconnect use
only. The 25, 50 and 100 Amp types are CSA certified
under file No. LR-17812.
PLUGS - Plugs have a unique functionally designed
grip for handling ease and convenience. The variety
of red, white, blue, yellow, black or green colors
permits wider latitude in patchboard distribution layouts.
Wiring connection to the same plug can be
either soldered or solderless. Cable fastening
screws are provided which permit a range of cable
sizes to be accommodated by the plug. All plug grips
are of a simple, two-piece threaded construction
for quick assembly.
RECEPTACLES - Receptacles have color-matched
nylon caps and bodies. All plastic parts of a receptacle
are molded through in the same color to permit
more rapid and accurate circuit identification on
both the front and back of the panel when installed.
Wiring connections are made to a threaded stud by
wire wraparound, by lug or bus bar connection.
8
SUPERCON®
Electrical Connectors
25 AMPERE TYPES
COLOR
SOCKET
RECEPTACLE
PIN
PLUG
PIN
RECEPTACLE
SOCKET
PLUG
BLACK RS25GB PP25GB RP25GB PS25GB
YELLOW RS25GY PP25GY RP25GY PS25GY
RED RS25GR PP25GR RP25GR PS25GR
BLUE RS25GBL PP25GBL RP25GBL PS25GBL
GREEN RS25GGN PP25GGN RP25GGN PS25GGN
WHITE RS25GWT PP25GWT RP25GWT PS25GWT
50 AMPERE TYPES
COLOR
SOCKET
RECEPTACLE
PIN
PLUG
PIN
RECEPTACLE
SOCKET
PLUG
BLACK RS50GB PP50GB RP50GB PS50GB
YELLOW RS50GY PP50GY RP50GY PS50GY
RED RS50GR PP50GR RP50GR PS50GR
BLUE RS50GBL PP50GBL RP50GBL PS50GBL
GREEN RS50GGN PP50GGN RP50GGN PS50GGN
WHITE RS50GWT PP50GWT RP50GWT PS50GWT
100 AMPERE TYPES
COLOR
SOCKET
RECEPTACLE
PIN
PLUG
PIN
RECEPTACLE
SOCKET
PLUG
BLACK RS100GB PP100GB RP100GB PS100GB
YELLOW RS100GY PP100GY RP100GY PS100GY
RED RS100GR PP100GR RP100GR PS100GR
BLUE RS100GBL PP100GBL RP100GBL PS100GBL
GREEN RS100GGN PP100GGN RP100GGN PS100GGN
WHITE RS100GWT PP100GWT RP100GWT PS100GWT
RS25GR PP25GR
RP25GWT PS25GWT
RS50GY PP50GY
RP50GBL PS50GBL
RS100GB PP100GB
RP100GGN PS100GGN
9
25 AMPERE TYPES OUTLINES
50 AMPERE TYPES OUTLINES
100 AMPERE TYPES OUTLINES
10
RS250GY PP250GY
RP250GR PS250GR
SUPERCON®
Electrical Connectors
250 AMPERE TYPES
COLOR
SOCKET
RECEPTACLE
PIN
PLUG
PIN
RECEPTACLE
SOCKET
PLUG
BLACK RS250GB PP250GB RP250GB PS250GB
YELLOW RS250GY PP250GY RP250GY PS250GY
RED RS250GR PP250GR RP250GR PS250GR
BLUE RS250GBL PP250GBL RP250GBL PS250GBL
GREEN RS250GGN PP250GGN RP250GGN PS250GGN
WHITE RS250GWT PP250GWT RP250GWT PS250GWT
250 AMPERE TYPES OUTLINES
11
Other Voltage Control Products
STABILINE® Power
Protection Products
STABILINE® Power Protection
Products include cabinet
and rack mount WHR Series
Voltage Regulators with ratings
to 1680 kVA, SW and
SPW Series Uninterruptible
Power Supplies that regulate
voltage and provide battery
backup in event of power failure,
PPC Series Power Conditioners
to protect from
power sags, spikes and
surges.
POWERSTAT® Variable
Transformers
The most recognized brand in the
technology, the POWERSTAT®
Variable Transformer line includes
31 series in either single or three
phase 120, 240 or 480 V types in
ratings from 0.13 to 365 kVA. They
are available in manual and motor
driven, portable with and without
meters, open and enclosed models.
Epoxy-coated POWERKOTE®
Coils give 20% average higher
current ratings, greater overload
capacity.
LUXTROL® Light Controls
LUXTROL® Light Controls are available for the
control of incandescent lighting. Types include
wallbox style manual WBD Series in ratings to
1800 watts and manual and motor driven 2000
and 5000 watt D series.
These distributors offer literature, technical assistance and a wide
range of models off the shelf for fastest possible delivery and service.

To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz

[comments?][Karma: 2 ( + / - )][Link] to comments

Superior Binding Posts BP21 Series 05/10/2003 at 5:18PM by Randy

Double Assembly 5-WAY® Binding Posts are designed for faster, more accurate mounting on 3/4-inch (19mm) centers. Rated for 15 amps, 1000 V working. Conventional miniature, standard, and larger stud types have panel insulating parts in black only. Thumbnuts are available in color combinations of red and black, black and black, and red and red. Plastic insulating parts have the same characteristics as single types. Metal parts are available in gold, nickel or tin-plated brass parts. Double assembly types are available in single packs or in 10-quantity bulk packs. All are Underwriters Laboratories recognized components.

Thumbnuts Plating
on Brass
Parts TYPE* Max. Amps Insulator
Color
Design Colors
Miniature (#6-32 UNC-2A Stud)
Fluted Black & Black Gold
Nickle
Tin BP21-2BB
BP21-2BBN
BP21-2BBT 15 Black
Red & Red Gold
Nickle
Tin BP21-2RR
BP21-2RRN
BP21-2RRT
Black & Red Gold
Nickle
Tin BP21-2BR
BP21-2BRN
BP21-2BRT

* Order single pack quantities by adding suffix "-1 PKG", for example BP21-2BB-1 PKG;
order bulk pack quantitiesby adding suffix "-B PKG", for example BP21-2BB-B PKG.
BP21 Single Series 5-WAY® Binding Posts have positive-stop captive thumbnuts that allow space to make connections yet reduce the likelihood of accidentally contacting current carrying parts. The BP21 single binding post series are made of nylon plastic per MIL-P20693A, Type IV. Current carrying parts are gold, nickel, or tin plated brass for improved conductivity and corrosion resistance. Metal parts are recessed for user and instrument protection and none touch the mounting panel. The BP21 series uses Miniature Fluted Nut Types - Rated for 15A, 1000V working. Uses #6-32 stud and nuts. Can be ordered in single packs or 100-quantity bulk packs. They are Underwriters Laboratories recognized components.

Miniature Fluted Nut Type**
BP21R Suffix R=Red Color
BP21WT Suffix WT=White Color
BP21BL Suffix BL=Blue Color
BP21Y Suffix Y=Yellow Color
BP21B Suffix B=Black Color
BP21GN Suffix GN=Green Color
**Type numbers are given are for binding posts with gold plated brass parts.

Additional Selections / Ordering Options
For nickel plated brass parts add suffix N, for example, BP21GN (nickel).
For tin plated brass parts add suffix T, for example BP21GNT (tin).
To order single pack quantities by adding suffix "-1 PKG", for example BP21R-1PKG.
To order bulk pack quantities by adding suffix "-B PKG",for example BP21R-B PKG.
To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz

[comments?][Karma: 2 ( + / - )][Link] to comments

Superior Electric Voltage Control Products 05/10/2003 at 5:15PM by Randy

POWERSTAT® Variable Transformers of the 10C Series are continuously adjustable autotransformers having a movable brush tap riding on a commutator. Rotation of the knob delivers any output voltage in the range of zero to or above line voltage. Negligible wave-form distortion makes them ideally suited for a wide range of OEM and testing applications. All are of open construction designed for back of panel mounting.
Units in the 10C Series are offered in 120 VAC single and three phase manually operated and rated at 2.25 amperes for constant current loads and 3.0 amperes for constant impedance loads. A constant current load is the output current that can be carried regardless of output voltage setting. Constant impedance loads apply only to units having maximum output voltage limited to line voltage. They are loads such as incandescent lamps or resistance heaters where the current drawn is approximately proportional to the applied voltage and increasing to maximum current at line voltage.
The tapping arrangement permits an output voltage of zero to line voltage or 10% above line voltage to allow compensation for a droop in line voltage or to provide a wider working range. Units of the 10C Series can be connected to deliver an increasing output voltage of zero to line voltage with either clockwise or counterclockwise knob rotation.

EXCELLENT REGULATION - POWERSTAT® Variable Transformers deliver the desired voltage with only negligible variation in output voltage from no-load to full-load current. Individual regulation curves are shown for all types.
HIGH EFFICIENCY - The watts loss of every POWERSTAT® Variable Transformer is very low in contrast to the inefficient, wasteful control provided by rheostats and other resistive type controllers.
NEGLIGIBLE WAVEFORM DISTORTION - A POWERSTAT® Variable Transformer provides an output voltage which is a faithful and distortionless reproduction of the applied input waveform. This is a required feature of many electronic applications and is a result of superior core and coil design and the use of highest grade silicon steel.
PRECIOUS METAL PLATED COMMUTATOR - A special precious metal plating process produces a commutator surface that withstands greater overloads and maintains a constant contact drop. The plated surface assures smooth performance, long life and increased resistance to corrosion.
NEGLIGIBLE MAINTENANCE - With ordinary care and attention to the operating instructions, the only elements that may require periodic inspection and maintenance are the brushes. Their replacement is infrequently needed because they are made of a special carbon and are of a design that assures proper contact of the brush to the commutator at any setting.
SMOOTH CONTROL - The output voltage of a POWERSTAT® Variable Transformer can be considered continuously adjustable. The voltage between turns is a fraction of a volt and the brush-tap is always in contact with one or more turns of the winding. Adjustment of output voltage can be made to a fraction of a volt.
RUGGED MECHANICAL CONSTRUCTION - All POWERSTAT® Variable Transformers are designed for heavy-duty, trouble-free operation. Rigid inspection at every stage of manufacture gives assurance of a quality-built product. The securely mounted core and coil, extra large aluminum brush heat radiator and durable brush assembly reduce the need for attention or replacement.
LONG LIFE - POWERSTAT® Variable Transformers give reliable performance over extended periods of time even under extreme operating conditions. Materials are constantly being improved to give increased life expectancy.
DUAL INPUT - Most 240 volt POWERSTAT® Variable Transformers have a lower input voltage tap that permits operation from a 120 volt input to obtain an output voltage of 0-280 volts. The output current must be reduced according to the curve in Figure B when the output voltage exceeds 125% of the input voltage.

To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz

[comments?][Karma: 2 ( + / - )][Link] to comments

Ohmite Product Index 05/10/2003 at 5:11PM by Randy

Product Index

Surface Mount Resistors

Wirewound Power Resistors: Industrial & Military Grade

Wirewound High Current

Wirewound/Metal Oxide Resistors: Commercial Grade

Carbon & Ceramic Composition Resistors

Thick Film Power Resistors

Heat Sinkable Thick Film Power Resistors

Thick Film, High Voltage, and Precision Resistors

Commercial Film Resistors

Variable Voltage Controls

Inductors

Ohm-O-Tone® Audio Indicators ( Sonalerts )

To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz

[comments?][Karma: 2 ( + / - )][Link] to comments

Ohmite Resistor Cabinets 05/10/2003 at 5:07PM by Randy

Cabinet Resistor Assortments
Carbon Composition
Wirewound
Metal Film
Carbon Film
Metal Oxide

Ohmite Cabinet Resistor Assortments are available from stock. They consist of sturdy plastic cabinets with compartmentalized drawers. Resistors are sorted by ohmic value. Each cabinet contains resistor types and values which are available from Ohmite stock.

For an exact listing of resistance values contained in any assortment, To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz

CARBON COMPOSITION Content Details

Part No. Power rating (watts) Resistance range No. of values Quantity No. of cabinets Series
CAB- 54C 0.250 10.0-5.6M 40 440 1 OD
CAB-525C 0.250 2.7-5.6M 76 800 2 OD
CAB-46C 0.250 2.7-5.6M 150 1450 4 OD
CAB- 510C 0.500 10.0-10M 40 200 1 OF
CAB-526C 0.500 2.7-20M 80 800 2 OF
CAB-47C 0.500 2.2-5.6M 150 1500 4 OF
CAB-52C 1.000 2.2-1M 40 200 1 OA

METAL FILM Content Details

Part No. Power rating (watts) Resistance range No. of values Quantity No. of cabinets Series
CAB-8CM 0.125 10.0-301K 40 250 1 MJ
CAB-27CM 0.125 10.0-301K 80 500 2 MJ
CAB-31CM 0.125 10.0-301K 120 1000 3 MJ
CAB-9CM 0.25 10.0-1M 40 250 1 MK
CAB-28CM 0.25 10.0-1M 80 500 2 MK
CAB-32CM 0.25 10.0-1M 120 1000 3 MK
CAB-10CM 0.50 10.0-1M 40 250 1 ML
CAB-29CM 0.50 10.0-1M 80 500 2 ML
CAB-33CM 0.50 10.0-1M 120 1000 3 ML
CAB-11CM 1.0 10.0-1M 40 250 1 MM

CARBON FILM Content Details

Part No. Power rating (watts) Resistance range No. of values Quantity No. of cabinets Series
CAB-5F 0.125 10.0-220K 31 150 1 OJ
CAB-22F 0.125 10.0-220K 52 500 2 OJ
CAB-34F 0.125 10.0-220K 104 1000 3 OJ
CAB-6F 0.250 1.0-1M 36 150 1 OK
CAB-23F 0.250 1.0-1M 75 1000 2 OK
CAB-43F 0.250 1.0-1M 137 1500 4 OK
CAB-7F 0.500 1.0-1M 36 150 1 OL
CAB-24F 0.500 1.0-1M 75 1000 2 OL
CAB-44F 0.500 1.0-1M 137 1500 4 OL
CAB-14F 1.000 10.0-1M 36 150 1 OM
CAB-15F 2.000 10.0-1M 36 150 1 ON
To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz

[comments?][Karma: 2 ( + / - )][Link] to comments

Ohmite little Demon resistors 05/10/2003 at 5:05PM by Randy

Little Demon®
Carbon Composition Molded Resistors
OD/OF Series - 5% Tolerance
OA Series -10% Tolerance

Series Wattage Ohms Dimensions (in. / mm) Max. Voltage Dielectric VAC Lead dia.
Length Max Diam.
OD 0.25 2.2-5.6M 0.276 / 7.0 0.098 / 2.5 250 500 .027 /.69
OF 0.50 2.2-20M 0.406 / 10.3 0.150 / 3.8 350 700 .029 / .75
OA 1.00 2.2-1M 0.591 / 15.0 0.236 / 6.0 500 1000 .035 / .92

Ohmite's Little Demons are small, reliable carbon composition resistors with exceptional strength. They are made tough by a molding process that combines the leads, insulation and resistive element into an integrated unit. Along with their small size, Little Demons perform with low noise, dissipate heat rapidly and offer high temperature stability.

Color codes are readable even after prolonged use thanks to a very durable coating that resists abrasions and chipping normally associated with automatic insertion equipment.

FEATURES

* Molded insulation for high dielectric strength.
* Rugged construction.
* Available in Resistor Cabinet Assortments & 100 pc packs.
* High surge capabilities.
* Comparable to "Mil" RC07, RC20, and RC32 types.

SPECIFICATIONS

Material

* Terminals: Solder-coated copper lead.
* Body: Molded Phenolic

Electrical

* Tolerance: ±5% (OD/OF); ±10% (OA)
* Derating: Linearly from 100% @ +70°C to 0% @ 130°C
Little Demon®
Carbon Composition Molded Resistors
OD/OF Series - 5% Tolerance
OA Series -10% Tolerance
Dimensions (in. / mm) Max. Dielectric
Series Wattage Ohms Length Max Diam. Voltage VAC Lead Dia.
OD 0.25 2.2-5.6M 0.276 / 7.0 0.098 / 2.5 250 500 .027 /.69
OF 0.50 2.2-20M 0.406 / 10.3 0.150 / 3.8 350 700 .029 / .75
OA 1.00 2.2-1M 0.591 / 15.0 0.236 / 6.0 500 1000 .035 / .92
2.2 ✔ ✔ ✔
2.4 ✔ ✔
2.7 ✔ ✔ ✔
3 ✔ ✔
3.3 ✔ ✔ ✔
3.6 ✔ ✔
3.9 ✔ ✔ ✔
4.3 ✔ ✔
4.7 ✔ ✔ ✔
5.1 ✔ ✔
5.6 ✔ ✔ ✔
6.2 ✔ ✔
6.8 ✔ ✔ ✔
7.5 ✔ ✔
8.2 ✔ ✔ ✔
9.1 ✔ ✔
10 ✔ ✔ ✔
11 ✔ ✔
12 ✔ ✔ ✔
13 ✔ ✔
15 ✔ ✔ ✔
16 ✔ ✔
18 ✔ ✔ ✔
20 ✔ ✔
22 ✔ ✔ ✔
24 ✔ ✔
27 ✔ ✔ ✔
30 ✔ ✔
33 ✔ ✔ ✔
36 ✔ ✔
39 ✔ ✔ ✔
43 ✔ ✔
47 ✔ ✔ ✔
51 ✔ ✔
56 ✔ ✔ ✔
62 ✔ ✔
68 ✔ ✔ ✔
75 ✔ ✔
82 ✔ ✔ ✔
91 ✔ ✔
100 ✔ ✔ ✔
110 ✔ ✔
120 ✔ ✔ ✔
130 ✔ ✔
150 ✔ ✔ ✔
160 ✔ ✔
180 ✔ ✔ ✔
200 ✔ ✔
220 ✔ ✔ ✔
240 ✔ ✔
270 ✔ ✔ ✔
300 ✔ ✔
330 ✔ ✔ ✔
360 ✔ ✔
390 ✔ ✔ ✔
430 ✔ ✔
470 ✔ ✔ ✔
510 ✔ ✔
560 ✔ ✔ ✔
620 ✔ ✔
680 ✔ ✔ ✔
750 ✔ ✔
820 ✔ ✔ ✔
910 ✔ ✔
1,000 ✔ ✔ ✔
1,100 ✔ ✔
1,200 ✔ ✔ ✔
1,300 ✔ ✔
1,500 ✔ ✔ ✔
1,600 ✔ ✔
1,800 ✔ ✔ ✔
2,000 ✔ ✔
2,200 ✔ ✔ ✔
2,400 ✔ ✔
2,700 ✔ ✔ ✔
3,000 ✔ ✔
3,300 ✔ ✔ ✔
3,600 ✔ ✔
3,900 ✔ ✔ ✔
4,300 ✔ ✔
4,700 ✔ ✔ ✔
5,100 ✔ ✔
5,600 ✔ ✔ ✔
6,200 ✔ ✔
6,800 ✔ ✔ ✔
7,500 ✔ ✔
8,200 ✔ ✔ ✔
9,100 ✔ ✔
10,000 ✔ ✔ ✔
11,000 ✔ ✔
12,000 ✔ ✔ ✔
13,000 ✔ ✔
15,000 ✔ ✔ ✔
16,000 ✔ ✔
18,000 ✔ ✔ ✔
20,000 ✔ ✔
22,000 ✔ ✔ ✔
24,000 ✔ ✔
27,000 ✔ ✔ ✔
30,000 ✔ ✔
33,000 ✔ ✔ ✔
36,000 ✔ ✔
39,000 ✔ ✔ ✔
43,000 ✔ ✔
STOCK PART NUMBERS FOR STANDARD RESISTANCE VALUES
47,000 ✔ ✔ ✔
51,000 ✔ ✔
56,000 ✔ ✔ ✔
62,000 ✔ ✔
68,000 ✔ ✔ ✔
75,000 ✔ ✔
82,000 ✔ ✔ ✔
91,000 ✔ ✔
100,000 ✔ ✔ ✔
110,000 ✔ ✔
120,000 ✔ ✔ ✔
130,000 ✔ ✔
150,000 ✔ ✔ ✔
160,000 ✔ ✔
180,000 ✔ ✔ ✔
200,000 ✔ ✔
220,000 ✔ ✔ ✔
240,000 ✔ ✔
270,000 ✔ ✔ ✔
300,000 ✔ ✔
330,000 ✔ ✔ ✔
360,000 ✔ ✔
390,000 ✔ ✔ ✔
430,000 ✔ ✔
470,000 ✔ ✔ ✔
510,000 ✔ ✔
560,000 ✔ ✔ ✔
620,000 ✔ ✔
680,000 ✔ ✔ ✔
750,000 ✔ ✔
820,000 ✔ ✔ ✔
910,000 ✔ ✔
1 MEG ✔ ✔ ✔
1.1 MEG ✔ ✔
1.2 MEG ✔ ✔
1.3 MEG ✔ ✔
1.5 MEG ✔ ✔
1.6 MEG ✔ ✔
1.8 MEG ✔ ✔
2.0 MEG ✔ ✔
2.2 MEG ✔ ✔
2.4 MEG ✔ ✔
2.7 MEG ✔ ✔
3.0 MEG ✔ ✔
3.3 MEG ✔ ✔
3.6 MEG ✔ ✔
3.9 MEG ✔ ✔
4.3 MEG ✔ ✔
4.7 MEG ✔ ✔
5.1 MEG ✔ ✔
5.6 MEG ✔ ✔
6.2 MEG ✔
6.8 MEG ✔
7.5 MEG ✔
8.2 MEG ✔
9.1 MEG ✔
10 MEG ✔
11 MEG ✔
12 MEG ✔
13 MEG ✔
15 MEG ✔
16 MEG ✔
18 MEG ✔
20 MEG ✔
OD ––– 0.25
OF ––– 0.50
OA ––– 1.0
Wattage
Part No.
Prefix ➤
Ohmic value
OD ––– 0.25
OF ––– 0.50
OA ––– 1.0
Wattage
Part No.
Prefix ➤
Wattage
Part No.
Prefix ➤
Ohmic value
Wattage
Part No.
Prefix ➤
Ohmic value
OD ––– 0.25
OF ––– 0.50
OA ––– 1.0
OD ––– 0.25
OF ––– 0.50
Wattage
Part No.
Prefix ➤
ORDERING INFORMATION
O D 6 8 3 J
Series
OD
OF
OA
Tolerance
J =5%
K = 10%
Ohms
68G= 6.8
680 = 68
681 = 680
682 = 6,800
683 = 68,000
684 = 680,000
L D 1.35" / 28.83mm
(OA: 1.18" / 30.0mm)
Ohmite’s Little Demons are
small, reliable carbon composition
resistors with exceptional
strength. They are made tough
by a molding process that
combines the leads, insulation
and resistive element into an
integrated unit. Along with their
small size, Little Demons perform
with low noise, dissipate
heat rapidly and offer high
temperature stability.
Color codes are readable
even after prolonged use
thanks to a very durable coating
that resists abrasions and
chipping normally associated
with automatic insertion equipment.
FEATURES
• Molded insulation for high dielectric
strength.
• Rugged construction.
• Available in Resistor Cabinet
Assortments & 100 pc packs.
• High surge capabilities.
• Comparable to “Mil” RC07,
RC20, and RC32 types.
SPECIFICATIONS
Material
Terminals: Solder-coated copper
lead.
Body: Molded Phenolic
Electrical
Tolerance: ±5% (OD/OF);
±10% (OA)
Derating: Linearly from 100% @
+70°C to 0% @ 130°C
To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz

[comments?][Karma: 2 ( + / - )][Link] to comments

Ohmite Powr-Rib Resistors 05/10/2003 at 5:01PM by Randy

Powr-Rib® Series
Edgewound/Round Wire Power Resistors

Designed in both Edgewound and Round Wire formats, these rugged resistors can handle 700 to 1000 Watts of power. Specify our edgewound design for very low resistance and high power capacity. When higher resistance with lower power capacity is required use our round wire design.

Constructed of a heavy resistance alloy mounted on ceramic insulators and supported by a metal mounting bracket. Metal parts, except for the resistance element, are heavily plated to prevent oxidation at high operating temperatures and to prevent corrosion. The mounting bar is slotted on each end to facilitate installation. Edgewound units provide clamp-type terminals, permitting a reliable connection which can be moved along the resistive element to obtain intermediate values.

SPECIFICATIONS

Electrical

* Current Rating: Continuous duty as listed
* Wattage Rating: 700 to 1,000 (up to 1,600 watts on special order)
* Resistance Tolerance: ±10% standard, ±5% available
* Terminals: Clamps, movable along resistor wire for setting intermediate resistance values on Edgewound units (current must be derated in proportion).
* Temperature Coefficient: ±300 ppm/°C for resistors 50 amps and more; ±500 ppm/°C for resistors 47 amps or less
* Ohmic Values: See chart
* Mounting: Metal mounting bar is slotted on each end to facilitate installation.
Edgewound units have clamp-type terminals which permits a reliable connection and can be moved along the resistive element to obtain intermediate values.

HOW TO ORDER

STOCK PART NUMBERS AND OTHER AVAILABLE VARIATIONS

Key:
A = Most popular stock values
B = Stock values
C = Non-stock values subject to minimum handling charge per item

Size* (number of insulator segments long)
2 3 4 5 (stock size) 6 7 8
Dim. A (in./mm) 8.875 (225.425) 11.875 (30.163) 14.875 (377.825) 17.875 (454.025) 20.875 (530.225) 23.875 (606.425) 26.875 (682.625)
Dim. B (in./mm) 7.250 (184.150) 10.250 (31.750) 13.250 (336.550) 16.250 (412.75) 19.250 (488.950) 22.250 (565.150) 25.250 (641.350)
Ohms Ohms Ohms Ohms Avail. Part No. Ohms Ohms Ohms Max. Amps
080 and 030 types Edgewound "Powr-rib" Resistors 0.033 0.057 0.080 0.100 A PFE5KR100 0.120 0.140 0.160 100
0.040 0.070 0.100 0.120 C PFE5KR120 0.140 0.160 0.180 91
0.046 0.078 0.110 0.140 B PFE5KR140 0.170 0.200 0.230 89
0.052 0.088 0.120 0.160 C PFE5KR160 0.190 0.220 0.250 78
0.060 0.100 0.140 0.180 C PFE5KR180 0.210 0.250 0.300 75
0.070 0.120 0.180 0.220 B PFE5KR220 0.260 0.300 0.340 68
0.080 0.130 0.190 0.250 A PFE5KR250 0.300 0.350 0.400 63
0.100 0.160 0.230 0.300 C PFE5KR300 0.360 0.420 0.480 57
0.110 0.180 0.250 0.330 B PFE5KR330 0.400 0.470 0.540 54
0.120 0.200 0.280 0.370 A PFE5KR370 0.450 0.530 0.610 50
0.170 0.280 0.380 0.500 A PFE5KR500 0.600 0.700 0.800 47
0.210 0.330 0.460 0.600 B PFE5KR600 0.720 0.850 0.980 43
0.230 0.360 0.510 0.670 B PFE5KR670 0.800 0.930 1.06 41
0.260 0.420 0.580 0.750 A PFE5KR750 0.900 1.05 1.20 39
0.350 0.560 0.770 1.00 A PFE5K1R00 1.20 1.40 1.60 33
0.450 0.730 1.00 1.30 A PFE5K1R30 1.50 1.75 2.00 29
0.560 0.900 1.20 1.60 A PFE5K1R60 1.90 2.20 2.50 26
0.690 1.20 1.70 2.20 A PFE5K2R20 2.70 3.10 3.50 18.4
0.880 1.50 2.20 2.80 A PFE5K2R80 3.40 4.00 4.60 16.3
1.10 1.90 2.70 3.50 A PFE5K3R50 4.30 5.10 5.90 14.6
1.40 2.40 3.50 4.50 A PFE5K4R50 5.50 6.50 7.50 12.7
1.70 2.90 4.20 5.40 A PFE5K5R40 6.60 7.80 9.00 11.8
2.10 3.70 5.30 6.80 A PFE5K6R80 8.30 9.80 11.3 10.3
2.70 4.60 6.50 8.50 A PFE5K8R50 10.40 12.3 14.2 9.4
080 and 030 types Round-Wire "Powr-rib" Resistors 3.4 5.9 8.5 11.0 A PFR5K11R0 13.5 16.0 18.5 8.3
4.1 7.1 10.0 13.0 B PFR5K13R0 15.9 18.8 21.7 7.6
5.3 9.2 13.0 17.0 B PFR5K17R0 20.8 24.6 28.4 6.6
6.3 10.9 15.4 20.0 A PFR5K20R0 24.5 29.0 33.5 5.9
7.9 13.6 19.3 25.0 A PFR5K25R0 30.7 36.4 42.1 5.1
*Order non-stock sizes, or variations, by length, and ohms. Two terminals supplied as standard unless otherwise specified.
To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz

[comments?][Karma: 2 ( + / - )][Link] to comments

Ohmite 80 Series Resistors 05/10/2003 at 5:00PM by Randy

80 Series
Acrasil® Silicone-Ceramic Conformal Axial Lead Wirewound Resistors
MIL-R-26 Specifications
1% Tolerance (5% available)

Series Wattage Ohms Dimensions (in. / mm) Voltage Lead ga.
Length Diam.
81F (RW70U) 1 0.1-6K 0.437 / 11.1 0.125 / 3.2 150 24
82 2 0.1-8K 0.406 / 10.3 0.219 / 5.6 100 20
83F (RW79U)
83J (RW69V) 3 0.1-20K 0.593 / 15.1 0.218 / 5.5 200 20
85F (RW74U)
85J (RW67V) 5 0.1-75K 0.937 / 23.8 0.343 / 8.7 460 18
80F (RW78U)
80J (RW68V) 10 0.1-150K 1.842 / 46.8 0.406 /10.3 1000 18
Non-Inductive versions available. Insert "N" before tolerance code. Example - 83NF2K21

Choose Ohmite's highest quality conformal axial lead silicone-ceramic coated resistors for applications requiring high precision and stability.

The wirewound 80 Series 1% tolerance resistors have a low temperature coefficient and maintain a high degree of stability under demanding conditions.

They feature all-welded construction and have the ability to maintain accurate resistance values due to their being stabilized. High quality 80 Series resistors meet or exceed rigid MIL-R-26 specifications.

FEATURES

* High Stability: ±0.5% for 1%.
* Designed for precision power applications.
* Mil values resistors marked with "Mil" designation and Ohmite stock part number.
* In accordance with MIL-R-26 specifications.
* All-welded construction.

SPECIFICATIONS

Material

* Coating: Silicone-ceramic.
* Core: Ceramic.
* Terminals: Solder-coated copper clad axial lead.
* Derating: Linearly from 100% @ +25°C to 0% @ +275°C.

Electrical

* Tolerance: ±5% (J type), ±1% (F type) (other tolerances available).
* Power rating: Based on 25°C free air rating.
* Maximum ohmic values: See chart.
* Overload: Under 5 watts: 5 times rated wattage for 5 seconds. 5 watts and over: 10 times rated wattage for 5 seconds.
* Temperature coefficient: Under 1 ohm: ±90 ppm/°C; 1 to 9.99 ohms: ±50 ppm/°C; 10 ohms and over: ±20 ppm/°C
* Dielectric withstanding voltage: 500 VAC: 1 watt rating; 1000 VAC: 2, 3, 5, 7 and 10 watt rating
To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz

[comments?][Karma: 2 ( + / - )][Link] to comments

Ohmite 40 Series Silicone Resistors 05/10/2003 at 4:58PM by Randy

40 Series
Ohmicone® Silicone-Ceramic Conformal Axial Lead Wirewound Resistors
1% and 5% Tolerances Standard

Series Wattage Ohms Dimensions (in. / mm) Voltage Lead ga.
Length Diam.
41 1.0 0.10-6K 0.437 / 11.1 0.125 / 3.2 150 24
42 2.0 0.10-8K 0.406 / 10.3 0.219 / 5.6 100 20
43 3.0 0.10-20K 0.593 / 15.1 0.218 / 5.5 200 20
45 5.0 0.10-70K 0.937 / 23.8 0.343 / 8.7 460 18
47 7.0 0.10-80K 1.280 / 32.5 0.343 / 8.7 670 18
40 10.0 0.10-150K 1.642 / 41.7 0.406 / 10.3 1000 18
Non-Inductive versions available. Insert "N" before tolerance code. Example - 42NJ27R

Ohmite 40 Series resistors are the most economical conformal silicone-ceramic coated resistors offered. These all-welded units are characterized by their low temperature coefficients and resistance to thermal shock, making them ideal for a wide range of electrical and electronic applications.

Units with 1% and 5% tolerances are identical in construction and electrical specifications. Durable but economical 40 Series resistors exceed industry requirements for quality.

FEATURES

* Economical
* Applications include commercial, industrial and communications equipment
* Stability under high temperature conditions
* All-welded construction
* CECC sizes available

SPECIFICATIONS

Material

* Coating: Conformal silicone-ceramic.
* Core: Ceramic.
* Terminals: Solder-coated copper clad axial lead.
* Derating: Linearly from 100% @ +25°C to 0% @ +275°C.

Electrical

* Tolerance: 5% (J type), 1% (F type) (other tolerances available).
* Power rating: Based on 25°C free air rating (other wattages available).
* Overload: Under 5 watts: 5 times rated wattage for 5 seconds. 5 watts and over: 10 times rated wattage for 5 seconds.
* Temperature coefficient: Under 1 ohm: 90 ppm/°C 1W to 9.99 ohms: 50 ppm/°C 10 ohms and over: 20 ppm/°C
To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz

[comments?][Karma: 2 ( + / - )][Link] to comments

Ohmite 270 Series Fixed Resistors 05/10/2003 at 4:57PM by Randy

270 Series
Vitreous Enamel Power Resistors

Series Wattage Ohms Dimensions (in. / mm) Voltage
Length L Diam. D I. D. Core C
L12 12 0.1-51K 1.75 / 44.4 0.313 / 7.94 0.188 / 4.76 565
L25 25 0.15-100K 2.0 / 50.8 0.562 / 14.3 0.313 / 7.94 625
L50 50 0.38-260K 4.0 / 101.6 0.562 / 14.3 0.313 / 7.94 1625
L100 100 0.23-101K 6.5 / 165.1 0.750 / 19.1 0.50 / 12.7 2845
L175 175 0.13-101K 8.5 / 215.9 1.125 / 28.6 0.75 / 19.1 3595
L225 225 0.16-129K 10.5 / 266.7 1.125 / 28.6 0.75 / 19.1 4595
L500 500 0.38-218K 12.0 / 304.8 2.50 / 63.5 1.75 / 44.5 4970
L1000 1000 0.69-392K 20.0 / 508.0 2.50 / 63.5 1.75 / 44.5 8900
Non-Inductive versions available from stock.
Other sizes available; Consult factory.
Also available in low-cost Centohm coating; Consult factory.

Select 270 Type fixed resistors for applications requiring wattage ratings from 12 to 1000 watts.

The 270 Type resistors are equipped with lug terminals suitable for soldering or sturdy bolt connection. When secure mounting is required, the hollow core of these resistors permit fastening with spring-type brackets, thru bolts or thru bolts with slotted-steel brackets.

Suitable for rugged applications, the 270 Type resistors feature all-welded construction and durable lead free vitreous enamel coating.

Mounting brackets not included with resistors (more mounting info).

FEATURES

* Terminals suitable for soldering or bolt connection.
* High wattage applications.
* Rugged lead free vitreous enamel coating.
* Flame resistant coating.
* All-welded construction.

SPECIFICATIONS

Material

* Coating: Lead free vitreous enamel.
* Core: Tubular ceramic.
* Terminals: Solder coated radial lug.
* Derating: Linearly from 100% @ +25°C to 0% @ +350°C.

Electrical

* Tolerance: ±5% 1 ohm and over (J); ±10% under 1 ohm.(K)
* Power rating: Based on 25°C free air rating.
* Overload: 10 times rated wattage for 5 seconds.
* Temperature coefficient: 1 to 20 ohms: ±400 ppm/°C. Above 20 ohms: ±260 ppm/°C
* Dielectric withstanding voltage: 1000 VAC: 12 to 100 watt rating. 3000 VAC: 175 to 225 watt rating (Measured from terminal to mounting bracket)
* To calculate max. amps: use the formula

Power limitations for high resistance values: When resistance exceeds the resistance values listed at right, derate the Power Rating by 25% to improve reliability:
Power rating Resistance value
12W 3,900 ohms
25W 12,000 ohms
50W 35,000 ohms
100W 75,000 ohms
No power derating necessary for ratings higher than 100 watts.

Mounting hardware info
Resistor Mounting Hardware
For 200, 210, and 270 Series Resistors

MOUNTING BRACKETS

Brackets fit inside cores of 200, 210 and 270 type resistors and remain in place by spring tension. Standard brackets are plated steel and have no suffix to part number. Spring steel brackets are indicated with an "S" suffix following part number.

Standard Spring steel Mtg screw size
(max.) For resistors
(power ratings)
Avail. Part # Avail. Part #
A 5 C 5S 6 8, 12 watt
B 7 C 7S 6 20 watt
A 9 C 9S 6 25, 70, 75 watt
A 12 A 12S 10 100 watt
A 18 A 18S 10 175, 225 watt
Key:
A = Most popular stock values
B = Stock values
C = Non-stock values subject to minimum handling charge per item

THRU BOLTS

Thru-Bolts, with centering mica insulating washers, permit perpendicular mounting of 200, 210 and 270 type resistors to panels up to 0.25" thick.

Avail. Part No. Bolt size For resistors
(power rating)
Length No.
C 7PA5 1.75" 8 8 watt
A 7PA10 2.5" 8 12 watt
C 7PA20 2.75" 8 20 watt
A 7PA25 2.75" 10 25 watt
A 7PA50 4.75" 10 50 watt
C 7PA75 6.75" 10 75 watt
A 7PA100 7.313" 10 100 watt
A 7PA160 9.5" 0.25" 175 watt
A 7PA200 11.5" 0.25" 225 watt

WASHERS

Metal Centering

Avail. Part No. Diameter For max.
screw size For resistors
(power ratings)
Outer Inner
A 6000 0.563" 0.190 #10 25, 50, 75 watt
A 6001 0.75" 0.190 #10 100 watt
A 6003 1.125" 0.250 0.25" 175, 225 watt

Mica insulating

Avail. Part No. Diameter For resistors
(power ratings)
Outer Inner
A 6010 0.75" 0.063" 25, 50, 75 watt
A 6011Ý 0.75" 0.313" 25, 50, 75 watt
C 6012 1" 0.063" 100 watt
B 6013Ý 1" 0.5" 100 watt
C 6014 1.25" 0.063" core 1" O.D. x 0.625" I.D.
A 6015Ý 1.25" 0.625" core 1" O.D. x 0.625" I.D.
B 6016 1.5" 0.063" 175, 225 watt
A 6017Ý 1.5" 0.75" 175, 225 watt

Ý Use with centering washers.

DOUBLE THUMB SCREW LUG

(Part Number 2160) The double thumb screw adjustable lug permits easier adjustment and less chance of damage to resistance wire. Available for 1.125" cores only.

THRU-BOLTS AND MOUNTING BRACKETS

Sturdy plated steel brackets, along with thru-bolts, centering washers and insulating washers (included), allow for secure mounting of 210 type and 270 type resistors. Mounting brackets are available in either slotted (one with end-slot/one with side-slot) or elongated styles.

Part No. Dimensions
A B C D E F G H
Slotted
6101-- 0.781" -- 0.75" 0.031" 0.438" 0.25" -- --
6104-- 0.781" -- 0.75" 0.031" 0.438" 0.25" -- --
6110-- 1" -- 1.125" 0.063" 0.813" 0.313" -- --
Elongated
6120-- 1" -- 0.5" 0.031" 0.422" 0.219" .438 .750
6126-- 1.5" -- 1.25" 0.063" 0.438" 0.281" .563 .875
6127-- 1.5" 2" 1.25" 0.063" 0.438" 0.281" .563 .875
6128-- 1.5" 2" 1.25" 0.063" 0.438" 0.281" .563 .875
6129-- 1.5" 2" 1.25" 0.063" 0.438" 0.281" .563 .875
Slotted Elongated No. of resistors
per bracket Resistor Size Resistor Type
Avail. Part # Avail. Part #
-- B 6120-D-1.75 1 12W 210/270
B 6101-2 B 6120-K-2 1 25W 210/270
A 6101-4 B 6120-K-4 1 50W 210/270
B 6101-6 -- 1 75W 210
A 6104-6.5 -- 1 100W 210/270
A 6110-8.5 A 6126-P-8.5 1 175W 210/270
-- A 6127-P-8.5 2 175W 210/270
-- A 6128-P-8.5 3 175W 210/270
-- B 6129-P-8.5 4 175W 210/270
B 6110-10.5 -- 1 225W 210/270

ADJUSTABLE LUGS FOR 210 SERIES

One standard screwdriver type adjustable lug is supplied with each unit.

Two types of lugs can be ordered separetely: standard or with a silver contact button; both types are available with either a screwdriver type or bakelite knob type lug.

Resistor core diam.
(in./mm) Standard Silver
Screw Knob Screw Knob
Avail. Part # Avail. Part # Avail. Part # Avail. Part #
0.313 / 7.94 C 2115 -- C 2116 --
0.563 / 14.3 A 2121 C 2122 B 2123 C 2124
0.750 / 19.05 A 2125 B 2126 C 2127 C 2128
1.125 / 28.58 B 2133 C 2134 C 2135 C 2136
To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz

[comments?][Karma: 2 ( + / - )][Link] to comments

Ohmite 210 Series Resistors Dividohm Adjustable 05/10/2003 at 4:55PM by Randy

210 Series
Dividohm® Vitreous Enamel Adjustable Power Resistors

Series Wattage Ohms Dimensions (in. / mm) Voltage
Length Diam. Core
D12 12 1.0-10K 1.75 / 44.4 0.313 / 7.94 0.188 / 4.76 565
D25 25 1.0-25K 2.0 / 50.8 0.562 / 14.3 0.313 / 7.94 625
D50 50 1.0-100K 4.0 / 101.6 0.562 / 14.3 0.313 / 7.94 1625
D75 75 1.0-100K 6.0 / 152.4 0.562 / 14.3 0.313 / 7.94 2625
D100 100 1.0-100K 6.5 / 165.1 0.750 / 19.1 0.50 / 12.7 2845
D175 175 1.0-100K 8.5 / 215.9 1.125 / 28.6 0.75 / 19.1 3595
D225 225 1.0-100K 10.5 / 266.7 1.125 / 28.6 0.75 / 19.1 4595
D500 500 1.5-15K 12.0 / 304.8 2.50 / 63.5 1.75 / 44.5 4970
D1000 1000 3.0-27.7K 20.0 / 508.0 2.50 / 63.5 1.75 / 44.5 8900
Other sizes available. Consult factory.
Also available in low-cost Centohm coating; Consult factory.

Choose Ohmite's 210 Type adjustable resistors for applications requiring settings at different resistance values. These wirewound resistors are equipped with an adjustable lug, making them ideal for adjusting circuits, obtaining odd resistance values and setting equipment to meet various line voltages.

210 Type resistors feature a hollow core to permit secure fastening with spring-type clips or thru bolts with washers. They also offer the durability of lead free vitreous enamel coating and all-welded construction.

Mounting brackets not included with resistors (more mounting info).

FEATURES

* Terminals suitable for soldering or bolt connection.
* Adjustable lug supplied.
* High wattage applications.
* All-welded construction.
* Rugged lead free vitreous enamel coating.
* Flame resistant coating.
* Thumb-screw-adjustable lug available (Part No. 2160) for 1.125" core resistors.

SPECIFICATIONS

Material

* Coating: Lead free vitreous enamel.
* Core: Tubular ceramic.
* Terminals: Solder coated radial lug.
* Adjustable terminal: Nickel plated steel. (Screwdriver type adjustable lug supplied standard. Other types, including silver contact units, available.)
* Derating: Linearly from 100% @ +25°C to 0% @ +350°C.

Electrical

* Tolerance: ±10% (K)
* Power rating: Based on 25°C free air rating. The stated wattage rating applies only when the entire resistance is in the circuit. Setting the lug at an intermediate point reduces the wattage rating by the approximate same proportion. Example: If the lug is set at half resistance, the wattage is reduced by approximately one-half.
* Overload: 10 times rated wattage for 5 seconds.
* Temperature coefficient: ±260 ppm/°C
* Dielectric withstanding voltage: 1000 VAC: 12 to 100 watt rating. 3000 VAC: 175 and 225 watt rating (measured from terminal to mounting bracket)
* To calculate max. amps: use the formula

Power limitations for high resistance values: When resistance exceeds the resistance values listed at right, derate the Power Rating by 25% to improve reliability:
Power rating Resistance value
12W 4,500 ohms
25W 9,000 ohms
50W 20,000 ohms
75W 35,000 ohms
100W 50,000 ohms
No power derating necessary for ratings higher than 100 watts.

Mounting hardware info
Resistor Mounting Hardware
For 200, 210, and 270 Series Resistors

MOUNTING BRACKETS

Brackets fit inside cores of 200, 210 and 270 type resistors and remain in place by spring tension. Standard brackets are plated steel and have no suffix to part number. Spring steel brackets are indicated with an "S" suffix following part number.

Standard Spring steel Mtg screw size
(max.) For resistors
(power ratings)
Avail. Part # Avail. Part #
A 5 C 5S 6 8, 12 watt
B 7 C 7S 6 20 watt
A 9 C 9S 6 25, 70, 75 watt
A 12 A 12S 10 100 watt
A 18 A 18S 10 175, 225 watt
Key:
A = Most popular stock values
B = Stock values
C = Non-stock values subject to minimum handling charge per item

THRU BOLTS

Thru-Bolts, with centering mica insulating washers, permit perpendicular mounting of 200, 210 and 270 type resistors to panels up to 0.25" thick.

Avail. Part No. Bolt size For resistors
(power rating)
Length No.
C 7PA5 1.75" 8 8 watt
A 7PA10 2.5" 8 12 watt
C 7PA20 2.75" 8 20 watt
A 7PA25 2.75" 10 25 watt
A 7PA50 4.75" 10 50 watt
C 7PA75 6.75" 10 75 watt
A 7PA100 7.313" 10 100 watt
A 7PA160 9.5" 0.25" 175 watt
A 7PA200 11.5" 0.25" 225 watt

WASHERS

Metal Centering

Avail. Part No. Diameter For max.
screw size For resistors
(power ratings)
Outer Inner
A 6000 0.563" 0.190 #10 25, 50, 75 watt
A 6001 0.75" 0.190 #10 100 watt
A 6003 1.125" 0.250 0.25" 175, 225 watt

Mica insulating

Avail. Part No. Diameter For resistors
(power ratings)
Outer Inner
A 6010 0.75" 0.063" 25, 50, 75 watt
A 6011Ý 0.75" 0.313" 25, 50, 75 watt
C 6012 1" 0.063" 100 watt
B 6013Ý 1" 0.5" 100 watt
C 6014 1.25" 0.063" core 1" O.D. x 0.625" I.D.
A 6015Ý 1.25" 0.625" core 1" O.D. x 0.625" I.D.
B 6016 1.5" 0.063" 175, 225 watt
A 6017Ý 1.5" 0.75" 175, 225 watt

Ý Use with centering washers.

DOUBLE THUMB SCREW LUG

(Part Number 2160) The double thumb screw adjustable lug permits easier adjustment and less chance of damage to resistance wire. Available for 1.125" cores only.

THRU-BOLTS AND MOUNTING BRACKETS

Sturdy plated steel brackets, along with thru-bolts, centering washers and insulating washers (included), allow for secure mounting of 210 type and 270 type resistors. Mounting brackets are available in either slotted (one with end-slot/one with side-slot) or elongated styles.

Part No. Dimensions
A B C D E F G H
Slotted
6101-- 0.781" -- 0.75" 0.031" 0.438" 0.25" -- --
6104-- 0.781" -- 0.75" 0.031" 0.438" 0.25" -- --
6110-- 1" -- 1.125" 0.063" 0.813" 0.313" -- --
Elongated
6120-- 1" -- 0.5" 0.031" 0.422" 0.219" .438 .750
6126-- 1.5" -- 1.25" 0.063" 0.438" 0.281" .563 .875
6127-- 1.5" 2" 1.25" 0.063" 0.438" 0.281" .563 .875
6128-- 1.5" 2" 1.25" 0.063" 0.438" 0.281" .563 .875
6129-- 1.5" 2" 1.25" 0.063" 0.438" 0.281" .563 .875
Slotted Elongated No. of resistors
per bracket Resistor Size Resistor Type
Avail. Part # Avail. Part #
-- B 6120-D-1.75 1 12W 210/270
B 6101-2 B 6120-K-2 1 25W 210/270
A 6101-4 B 6120-K-4 1 50W 210/270
B 6101-6 -- 1 75W 210
A 6104-6.5 -- 1 100W 210/270
A 6110-8.5 A 6126-P-8.5 1 175W 210/270
-- A 6127-P-8.5 2 175W 210/270
-- A 6128-P-8.5 3 175W 210/270
-- B 6129-P-8.5 4 175W 210/270
B 6110-10.5 -- 1 225W 210/270

ADJUSTABLE LUGS FOR 210 SERIES

One standard screwdriver type adjustable lug is supplied with each unit.

Two types of lugs can be ordered separetely: standard or with a silver contact button; both types are available with either a screwdriver type or bakelite knob type lug.

Resistor core diam.
(in./mm) Standard Silver
Screw Knob Screw Knob
Avail. Part # Avail. Part # Avail. Part # Avail. Part #
0.313 / 7.94 C 2115 -- C 2116 --
0.563 / 14.3 A 2121 C 2122 B 2123 C 2124
0.750 / 19.05 A 2125 B 2126 C 2127 C 2128
1.125 / 28.58 B 2133 C 2134 C 2135 C 2136
To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz

[comments?][Karma: 2 ( + / - )][Link] to comments

Ohmite 20 Series Resistors 05/10/2003 at 4:53PM by Randy

20 Series
Vitreous Enamel Conformal Axial Lead Wirewound Resistors
5% Tolerance Standard

Series Wattage Ohms Dimensions (in. / mm) Voltage Lead ga.
Length* Diam.*
21 1 0.1-3.2K 0.406 / 10.3 0.156 / 4.0 75 24
22 2 0.1-4.4K 0.406 / 10.3 0.219 / 5.6 65 20
23 3 0.1-10K 0.500 / 12.7 0.220 / 5.6 135 20
25 5 0.1-28K 1.000 / 25.4 0.276 / 7.0 330 20
27 7 0.1-62K 1.250 / 31.8 0.394 / 10.0 450 20
20 10 0.1-100K 1.844 / 46.8 0.394 / 10.0 720 20
12.5 watt size available on special order

*For units below 1W, add 15% to body diameter, 10% to body length.

The 20 Series axial lead resistors are both durable and economical. They have all the electrical attributes of the more expensive 90 Series resistors, including an all-welded construction.

They offer the durability of a lead free conformal vitreous enamel coating and are ideal for computer, communications and industrial applications in which cost, quality and reliability are key considerations.

FEATURES

* Rugged vitreous enamel coating withstands high humidity and temperature cycling.
* Durable construction, recommended for industrial applications where reliability is paramount.
* All-welded construction.
* Flame resistant lead free vitreous enamel coating.

SPECIFICATIONS

Material

* Coating: Conformal lead free vitreous enamel.
* Core: Ceramic.
* Terminals: Solder-coated axial lead.
* Derating: Linearly from 100% @ +25°C to 0% @ +350°C.

Electrical

* Tolerance: ±5% standard; Other tolerances available
* Power rating: Based on 25°C free air rating (other wattages available).
* Overload: Under 7 watts: 5 times rated wattage for 5 seconds; 7 watts and over: 10 times rated wattage for 5 seconds.
* Temperature coefficient: 1 to 9.99 ohms: ±50 ppm/°C; 10 ohms and over: ±30 ppm/°C
To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz

[comments?][Karma: 2 ( + / - )][Link] to comments

Ohmite 200 Series Brown Devil 05/10/2003 at 4:52PM by Randy

200 Series
Brown Devil® Vitreous Enamel Power Resistors

Series Wattage Ohms Dimensions (in. / mm) Lead Gauge Voltage
Length Diam. Core
B5 5.25 0.1-20K 0.625 / 15.88 0.250 / 6.35 0.135 / 3.43 20 187
B8 8.0 0.03-25K 1.000 / 25.40 0.313 / 7.94 0.188 / 4.76 18 250
B12 12.0 0.08-51K 1.750 / 44.45 0.313 / 7.94 0.188 / 4.76 18 625
B20 20.0 0.1-100K 2.000 / 50.80 0.438 / 11.11 0.250 / 6.35 18 750
Non-Inductive versions available. Insert "N" before tolerance code. Example - B5NJ10R
Also available in low-cost Centohm coating; Consult factory.

Ohmite's Brown Devils® are small, exceptionally durable power resistors. They feature all-welded construction and rugged, flame resistant conformal lead free vitreous enamel coating to ensure successful performance under high temperatures.

The wirewound 200 Type resistors have a hollow-core construction, which accommodates rigid mounting with brackets or thru bolts.

Mounting brackets not included with resistors (more mounting info).

FEATURES

* Rugged lead free vitreous enamel coating
* All-welded construction.
* Self supporting lead mounting option.
* Higher power ratings.
* Flame-resistant lead free vitreous enamel coating.

SPECIFICATIONS

Material

* Coating: lead free vitreous enamel.
* Core: Ceramic.
* Terminals: Tinned axial lead.
* Derating: Linearly from 100% @ +25°C to 0% @ +350°C.

Electrical

* Tolerance: ±5%, 1 ohm and over; ±10%, under 1 ohm.
* Power rating: Based on 25°C free air rating.
* Overload: 10 times rated wattage for 5 seconds.
* Temperature coefficient: 5 ohms and under, ±400 ppm/°C; Above 5 ohms, ±260 ppm/°C
* To calculate max. amps: use the formula

Mounting hardware info
Resistor Mounting Hardware
For 200, 210, and 270 Series Resistors

MOUNTING BRACKETS

Brackets fit inside cores of 200, 210 and 270 type resistors and remain in place by spring tension. Standard brackets are plated steel and have no suffix to part number. Spring steel brackets are indicated with an "S" suffix following part number.

Standard Spring steel Mtg screw size
(max.) For resistors
(power ratings)
Avail. Part # Avail. Part #
A 5 C 5S 6 8, 12 watt
B 7 C 7S 6 20 watt
A 9 C 9S 6 25, 70, 75 watt
A 12 A 12S 10 100 watt
A 18 A 18S 10 175, 225 watt
Key:
A = Most popular stock values
B = Stock values
C = Non-stock values subject to minimum handling charge per item

THRU BOLTS

Thru-Bolts, with centering mica insulating washers, permit perpendicular mounting of 200, 210 and 270 type resistors to panels up to 0.25" thick.

Avail. Part No. Bolt size For resistors
(power rating)
Length No.
C 7PA5 1.75" 8 8 watt
A 7PA10 2.5" 8 12 watt
C 7PA20 2.75" 8 20 watt
A 7PA25 2.75" 10 25 watt
A 7PA50 4.75" 10 50 watt
C 7PA75 6.75" 10 75 watt
A 7PA100 7.313" 10 100 watt
A 7PA160 9.5" 0.25" 175 watt
A 7PA200 11.5" 0.25" 225 watt

WASHERS

Metal Centering

Avail. Part No. Diameter For max.
screw size For resistors
(power ratings)
Outer Inner
A 6000 0.563" 0.190 #10 25, 50, 75 watt
A 6001 0.75" 0.190 #10 100 watt
A 6003 1.125" 0.250 0.25" 175, 225 watt

Mica insulating

Avail. Part No. Diameter For resistors
(power ratings)
Outer Inner
A 6010 0.75" 0.063" 25, 50, 75 watt
A 6011Ý 0.75" 0.313" 25, 50, 75 watt
C 6012 1" 0.063" 100 watt
B 6013Ý 1" 0.5" 100 watt
C 6014 1.25" 0.063" core 1" O.D. x 0.625" I.D.
A 6015Ý 1.25" 0.625" core 1" O.D. x 0.625" I.D.
B 6016 1.5" 0.063" 175, 225 watt
A 6017Ý 1.5" 0.75" 175, 225 watt

Ý Use with centering washers.

DOUBLE THUMB SCREW LUG

(Part Number 2160) The double thumb screw adjustable lug permits easier adjustment and less chance of damage to resistance wire. Available for 1.125" cores only.

THRU-BOLTS AND MOUNTING BRACKETS

Sturdy plated steel brackets, along with thru-bolts, centering washers and insulating washers (included), allow for secure mounting of 210 type and 270 type resistors. Mounting brackets are available in either slotted (one with end-slot/one with side-slot) or elongated styles.

Part No. Dimensions
A B C D E F G H
Slotted
6101-- 0.781" -- 0.75" 0.031" 0.438" 0.25" -- --
6104-- 0.781" -- 0.75" 0.031" 0.438" 0.25" -- --
6110-- 1" -- 1.125" 0.063" 0.813" 0.313" -- --
Elongated
6120-- 1" -- 0.5" 0.031" 0.422" 0.219" .438 .750
6126-- 1.5" -- 1.25" 0.063" 0.438" 0.281" .563 .875
6127-- 1.5" 2" 1.25" 0.063" 0.438" 0.281" .563 .875
6128-- 1.5" 2" 1.25" 0.063" 0.438" 0.281" .563 .875
6129-- 1.5" 2" 1.25" 0.063" 0.438" 0.281" .563 .875
Slotted Elongated No. of resistors
per bracket Resistor Size Resistor Type
Avail. Part # Avail. Part #
-- B 6120-D-1.75 1 12W 210/270
B 6101-2 B 6120-K-2 1 25W 210/270
A 6101-4 B 6120-K-4 1 50W 210/270
B 6101-6 -- 1 75W 210
A 6104-6.5 -- 1 100W 210/270
A 6110-8.5 A 6126-P-8.5 1 175W 210/270
-- A 6127-P-8.5 2 175W 210/270
-- A 6128-P-8.5 3 175W 210/270
-- B 6129-P-8.5 4 175W 210/270
B 6110-10.5 -- 1 225W 210/270

ADJUSTABLE LUGS FOR 210 SERIES

One standard screwdriver type adjustable lug is supplied with each unit.

Two types of lugs can be ordered separetely: standard or with a silver contact button; both types are available with either a screwdriver type or bakelite knob type lug.

Resistor core diam.
(in./mm) Standard Silver
Screw Knob Screw Knob
Avail. Part # Avail. Part # Avail. Part # Avail. Part #
0.313 / 7.94 C 2115 -- C 2116 --
0.563 / 14.3 A 2121 C 2122 B 2123 C 2124
0.750 / 19.05 A 2125 B 2126 C 2127 C 2128
1.125 / 28.58 B 2133 C 2134 C 2135 C 2136
To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz

[comments?][Karma: 2 ( + / - )][Link] to comments

Ohmite 10 Series 05/10/2003 at 4:49PM by Randy

10 Series
Lo-Mite® Molded Silicone Axial Lead Wire Element Resistors
1% - 5% Tolerance

Series Wattage Ohms Dimensions (in. / mm)
Length Diam. "M" Lead ga.
12 2 0.005-0.10 0.406 / 10.3 0.094 / 2.4 1.156 / 29.4 20
13 3 0.005-0.20 0.560 / 14.2 0.205 / 5.2 1.310 / 33.3 20
15 5 0.005-0.25 0.925 / 23.5 0.330 / 8.4 1.675 / 42.5 18

FEATURES

* Ideal for current sensing applications.
* 1% Tolerance standard, others available.
* Fixed resistance measuring point "M".
* Low inductance (non-inductive below .25 ohms).

SPECIFICATIONS

Material

* Terminals: Solder-plated copper leads or copper clad steel depending on ohmic value.
* Encapsulation: Silicone molding compound.
* Derating: Linearly from 100% @ +25°C to 0% @ +275°C.

Electrical

* Tolerance: ±1% standard; Others available.
* Power rating: Based on 25°C free air rating.
* Overload: 5 times rated wattage for 5 seconds.
* Dielectric withstanding voltage: 1000 VRMS for 3 and 5 watt; 500 VRMS for 2 watt.
* Insulation resistance: Not less than 1000M ohms.
* Thermal EMF: Less than ±2µV/°C.
* Temperature range: -55°C to 275°C.

Ohmic value Part number
2 watt 3 watt 5 watt
0.005 12FR005 13FR005 15FR005
0.010 12FR010 13FR010 15FR010
0.015 12FR015 13FR015 15FR015
0.020 12FR020 13FR020 15FR020
0.025 12FR025 13FR025 15FR025
0.030 12FR030 13FR030 15FR030
0.040 12FR040 13FR040 15FR040
0.050 12FR050 13FR050 15FR050
0.060 12FR060 13FR060 15FR060
0.070 12FR070 13FR070 15FR070
0.080 12FR080 13FR080 15FR080
0.090 12FR090 13FR090 15FR090
0.100 12FR100 13FR100 15FR100
0.150 13FR150 15FR150
0.200 13FR200 15FR200
0.250 15FR250
To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz

[comments?][Karma: 2 ( + / - )][Link] to comments

Ohmite resistors 05/10/2003 at 4:47PM by Randy

Since 1925 Ohmite Manufacturing has provided leadership in the electronic components industry. As a manufacturer of power resistors, rheostats, and tap switches, Ohmite's quality and selection are second to none.

In addition to our base products, a broad line of audio indicators, inductors, and commercial grade resistors are available.

To order these products, contact

Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz

[comments?][Karma: 2 ( + / - )][Link] to comments