  |
|
RACK COOLING FANS AND BLOWERS
|
04/25/2003 at 09:40AM by Randy
|
|
 |
|
Accessories - Blowers/Fans
FN-1282 10" Exhaust Fan
Design Features
Fan mounts in the top of ventilated Economizer racks. Supplied with finger guard and all mounting hardware. 36" power cord supplied. Standard UL/CSA rated with 535 CFM air flow. Weight: 4.38 lbs. Heatsinking aluminum housing with high strength UL94V-0 thermoplastic impeller. Shaded-pole, thermally protected, ball bearing motor draws .70/.78 amps at 115 VAC. Operating temperature range: -20 to +60 degrees Celsius. Noise power emission level: 6.2 Bels.
Exhaust Fan
Catalog Number Drawings Weight
FN-1282 4.38
Accessories - Fan Tray
Fans - FN1280
Design Features
110VAC, .21 Amps.
105 CFM air flow.
-20 to +60 degree Celsius temperature range.
UL Approved.
Weight: 1.75 lbs
Optional Wire Form Finger Guard (FG-1281) Available
Catalog Number Drawings
FN-1280
Accessories - Blowers/Fans
Blowers
Design Features
The lowest silhouette height with the highest CFM output in the industry. Blowers exit air out the back, also, up and out the top of racks, cabinets or consoles.
Blower
Features B-23-A B-25-A B-52 B-60 B-62
Panel Height 3.50" 5.25" 5.25" 3.50" 5.25"
Overall Depth 12.00" 14.50" 9.00" 10.50" 7.69"
Motor Bearings Ball Ball Ball Ball Ball
Watts High 150 410 70 90 95
Low 60 225
RPM High 1400 1135 3000 1500 3000
Low 1150 675
Run Amps High 1.7 5.3 0.9 1.2 1.4
Low 1.2 2.7
L.R. Amps High 2.2 6.1 1.2 1.6 1.9
Low 1.3 2.8
Air CFM High 180 350 125 160 300
Low 130 215
Exhaust Direction 3 3 2 2 2
Noise Level High Speed 60* 65* 50* 53** 58**
Low Speed 55 50
Power Cord Length 24.00" 24.00' 24.00" 36"*** 36"***
No. of Wires 3 3 3 3 3
Weight Lbs. 18 30 16 18 13
Drawings
* Noise criteria units. ** DBA *** Includes molded plug
To order these products, contact
Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz
|
|
|
|
|
BUD HANDLES
|
04/25/2003 at 09:19AM by Randy
|
|
|
|
HANDLES
Catalog No. Picture Material Finish Mounting Centers Hand Clearance
H-9110-B
(Angled Legs)
Steel 0.37" dia. Chrome Plated 6.00" 1.25" (2) 10-32 x 0.37" Screws
H-9111-B Steel 0.37" dia. Chrome Plated 4.00" .93" (2) 10-32 x 0.37" Screws
H-9112-B Steel 0.37" dia. Chrome Plated 6.00" .93" (2) 10-32 x 0.37" Screws
H-9113-B Steel 0.37" dia. Chrome Plated 8.00" .93" (2) 10-32 x 0.37" Screws
H-9114-B Steel 0.50" dia. Chrome Plated 8.00" 1.50" (2) 1/4"-28 x 0.50" Screws
H-9116-B Steel 0.37" dia. Chrome Plated 6.00" .93" (2) 1/4"-28 Hex Nuts
H-9160-B Steel 0.37" dia. Chrome Plated 3.50" 1.68" (2) 1/4"-28 Hex Nuts
H-9161-B Steel 0.37" dia. Chrome Plated 5.25" 1.68" (2) 1/4"-28 Hex Nuts
H-9166-B Brass 0.25" dia. Chrome Plated 1.90" 1.00" (2) 6-32 x 0.50" Screws
H-9168-B Brass 0.25" dia. Chrome Plated 3.00" 1.00" (2) 6-32 x 0.50" Screws
H-9170-B Aluminum Clear Anodized 2.75" 1.18" (2) 8-32 x 0.62" Screws
H-9174-B Aluminum Clear Anodized 4.00" 1.09" (2) 8-32 x 0.37" Screws
H-9176-B Aluminum Clear Anodized 3.25" 0.75" (2) 8-32 x 0.37" Screws
H-9177-B Aluminum Clear Anodized 4.37" 0.75" (2) 8-32 x 0.37" Screws
H-9179-B Aluminum Clear Anodized 4.00" 0.62" (2) 8-32 x 0.37" Screws
H-9180-B Aluminum Clear Anodized 4.00" - (2) 8-32 x 0.25" Screws
H-9183-B Aluminum Clear Anodized 4.56" 1.09" (2) 8-32 x 0.37" Screws
LH-9358 Steel Zinc Plated Non-Locking Latch Handle Interchangeable with existing key lock used on Series 60, Economizer, Classic II, Series 2000 Doors
To order these products, contact
Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz
|
|
|
|
|
BUD RACK PANELS
|
04/25/2003 at 09:15AM by Randy
|
|
|
|
Accessories - Panels
Surface Shield Panels, PA, and PS Series
Standard panels for all cabinets, cabinet racks, relay racks and small enclosures, where applicable.
Design Features
Available in 11 gauge steel and .12" aluminum Alloy. Steel, standard aluminum and hard aluminum (6061-T6) panels come in 19" widths. Standard .12" aluminum panels also available in 24" widths.
Aluminum Panels
24" Panel 0.12" Thick 19" Panel 0.12" Thick
Catalog No. Drawings Height Weight Lbs. Catalog No. Drawings Height Weight Lbs.
PA-2401 1.75" .50 PA-1131 1.75" .37
PA-2402 3.50" 1.00 PA-1132 3.50" .75
PA-2403 5.25" 1.50 PA-1133 5.25" 1.12
PA-2404 7.00" 2.25 PA-1134 7.00" 1.75
PA-2405 8.75" 2.50 PA-1135 8.75" 2.00
PA-2406 10.50" 3.00 PA-1136 10.50" 2.50
PA-2407 12.25" 3.25 PA-1137 12.25" 2.75
PA-2408 14.00" 3.50 PA-1138 14.00" 3.25
PA-2409 15.75" 4.00 PA-1139 15.75" 3.62
PA-2410 17.50" 4.75 PA-1140 17.50" 4.00
PA-2411 19.25" 5.25 PA-1141 19.25" 4.25
PA-2412 21.00" 5.50 PA-1142 21.00" 5.00
Aluminum and Steel Panels
19" Steel 11 GA. 19" Aluminum 0.12" Thick
Catalog No. Drawings Height Weight Lbs. Catalog No. Drawings Height Weight Lbs.
PS-1250 1.75" 1.25 PA-1101 1.75" .37
PS-1251 3.50" 2.25 PA-1102 3.50" .75
PS-1252 5.25" 3.25 PA-1103 5.25" 1.12
PS-1253 7.00" 4.50 PA-1104 7.00 1.75
PS-1254 8.75" 6.00 PA-1105 8.75" 2.00
PS-1255 10.50" 7.00 PA-1106 10.50" 2.50
PS-1256 12.25" 8.25 PA-1107 12.25" 2.75
PS-1257 14.00" 9.50 PA-1108 14.00" 3.25
PS-1258 15.75" 10.75 PA-1109 15.75" 3.62
PS-1259 17.50" 11.75 PA-1110 17.50" 4.00
PS-1260 19.25" 13.00 PA-1111 19.25" 4.25
PS-1261 21.00" 14.25 PA-1112 21.00" 5.00
Accessories - Panels
Surface Shield Panels, PA, and PS Series
Standard panels for all cabinets, cabinet racks, relay racks and small enclosures, where applicable.
Design Features
Available in 11 gauge steel and .12" aluminum Alloy. Steel, standard aluminum and hard aluminum (6061-T6) panels come in 19" widths. Standard .12" aluminum panels also available in 24" widths.
--------------------------------------------------------------------------------
Aluminum Panels
24" Panel 0.12" Thick 19" Panel 0.12" Thick
Catalog No. Drawings Height Weight Lbs. Catalog No. Drawings Height Weight Lbs.
PA-2401 1.75" .50 PA-1131 1.75" .37
PA-2402 3.50" 1.00 PA-1132 3.50" .75
PA-2403 5.25" 1.50 PA-1133 5.25" 1.12
PA-2404 7.00" 2.25 PA-1134 7.00" 1.75
PA-2405 8.75" 2.50 PA-1135 8.75" 2.00
PA-2406 10.50" 3.00 PA-1136 10.50" 2.50
PA-2407 12.25" 3.25 PA-1137 12.25" 2.75
PA-2408 14.00" 3.50 PA-1138 14.00" 3.25
PA-2409 15.75" 4.00 PA-1139 15.75" 3.62
PA-2410 17.50" 4.75 PA-1140 17.50" 4.00
PA-2411 19.25" 5.25 PA-1141 19.25" 4.25
PA-2412 21.00" 5.50 PA-1142 21.00" 5.00
Aluminum and Steel Panels
19" Steel 11 GA. 19" Aluminum 0.12" Thick
Catalog No. Drawings Height Weight Lbs. Catalog No. Drawings Height Weight Lbs.
PS-1250 1.75" 1.25 PA-1101 1.75" .37
PS-1251 3.50" 2.25 PA-1102 3.50" .75
PS-1252 5.25" 3.25 PA-1103 5.25" 1.12
PS-1253 7.00" 4.50 PA-1104 7.00 1.75
PS-1254 8.75" 6.00 PA-1105 8.75" 2.00
PS-1255 10.50" 7.00 PA-1106 10.50" 2.50
PS-1256 12.25" 8.25 PA-1107 12.25" 2.75
PS-1257 14.00" 9.50 PA-1108 14.00" 3.25
PS-1258 15.75" 10.75 PA-1109 15.75" 3.62
PS-1259 17.50" 11.75 PA-1110 17.50" 4.00
PS-1260 19.25" 13.00 PA-1111 19.25" 4.25
PS-1261 21.00" 14.25 PA-1112 21.00" 5.00
To order these products, contact
Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz
|
|
|
|
|
BUD CLASSIC II RACKS
|
04/25/2003 at 09:10AM by Randy
|
|
|
|
Large Cabinet Racks
Classic II
Refined styling, design simplicity. Rigid aluminum extruded trim with black plastic insert frames the front - a few reasons why the Classic II sets your product apart from the conventional. Classic II Cabinet Racks include welded frame, top, bottom, sides, rear door with cam lock
Design Features
Welded Frame: 14-gauge steel vertical rails. 16-gauge steel top and bottom. Uniquely designed, 16-gauge steel rail supports. Furnished complete with removable sides, rear doors and two pairs of panel ounting rails.
Panel Mounting Rails: 12-gauge steel. Fully adjustable, tapped #10-32 in front on E.I.A. universal spacing. Separate .28" diameter holes provided for mounting accessories. Two pairs furnished.
Side Panel: 20-gauge steel. Removable from outside for easy access.
Bottom: Pierced for RC-7758 casters, and with one 9.56" square hole and four 1.11" knockouts for cable access. 1200# equipment load capacity.
Ventilated Features
Ventilated cabinet sides and door feature ventilating louvers. Ventilated cabinet top has a perforated area using .25" dia. holes and .32" staggered centers, ters, inside a 9.69" dia. bolt circle. This provides a 58% open area. Holes provided for mounting a 10.00" dia. exhaust fan (Bud Fan No. FN-1282.)
Finishes
Grey Texture (GT), Royal Blue Texture (RB). Available in other Bud textured finishes at no extra cost.
Classic II Cabinet Racks (19" Panel Width)
Non-Ventilated Ventilated Panel
Space
(PS) Outside
Height
(A) Outside
Width
(B) Outside
Depth
(C) Clear
Inside
Depth
(D) Weight
(Lbs.)
Catalog No. Acce- ssories Drawings Catalog No. Acce- ssories Drawings
AGR-9522 Acc. AGR-9572 Acc. 42.00" 47.31" 22.00" 18.50" 17.00" 110
AGR-9523 Acc. AGR-9573 Acc. 52.50" 57.81" 22.00" 18.50" 17.00" 124
AGR-9524 Acc. AGR-9574 Acc. 61.25" 66.56" 22.00" 18.50" 17.00" 139
AGR-9525 Acc. AGR-9575 Acc. 70.00" 75.31" 22.00" 18.50" 17.00" 151
AGR-9526 Acc. AGR-9576 Acc. 78.75" 84.06" 22.00" 18.50" 17.00" 163
AGR-9532 Acc. AGR-9582 Acc. 42.00" 47.31" 22.00" 25.50" 24.00" 128
AGR-9533 Acc. AGR-9583 Acc. 52.50" 57.81" 22.00" 25.50" 24.00" 145
AGR-9534 Acc. AGR-9584 Acc. 61.25" 66.56" 22.00" 25.50" 24.00" 162
AGR-9535 Acc. AGR-9585 Acc. 70.00" 75.31" 22.00" 25.50" 24.00" 175
AGR-9536 Acc. AGR-9586 Acc. 78.75" 84.06" 22.00" 25.50" 24.00" 189
AGR-9542 Acc. AGR-9592 Acc. 42.00" 47.31" 22.00" 30.75" 29.25" 143
AGR-9543 Acc. AGR-9593 Acc. 52.50" 57.81" 22.00" 30.75" 29.25" 160
AGR-9544 Acc. AGR-9594 Acc. 61.25" 66.56" 22.00" 30.75" 29.25" 180
AGR-9545 Acc. AGR-9595 Acc. 70.00" 75.31" 22.00" 30.75" 29.25" 194
AGR-9546 Acc. AGR-9596 Acc. 78.75" 84.06" 22.00" 30.75" 29.25" 209
To order these products, contact
Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz
|
|
|
|
|
BUD ECONOMIZER RACK
|
04/25/2003 at 09:02AM by Randy
|
|
|
|
Large Cabinet Racks
Economizer
This high quality, low cost cabinet rack is available with 19" and 24" panel widths in both ventilated and non-ventilated versions.
Design Features
Welded Frame: 14-gauge steel vertical rails. 16-gauge steel top and bottom. Uniquely designed, 16-gauge steel rail supports. Furnished complete with removable sides, rear door and one pair of panel mounting rails.
Panel Mounting Rails: 12-gauge steel. Fully adjustable, tapped #10-32 in front on E.I.A. universal spacing. (Use #7346 screws - order separately) Separate .28 diameter holes provided for mounting accessories.
Side Panel: 20-gauge steel. Removable from outside for easy access.
Bottom: Pierced for RC-7758 casters, and with one 9.56 square hole and four 1.11 knock outs for cable access.
1200# Equipment load capacity.
Bonus Features
Finishes
Sand Texture (S), Royal Blue Texture (RB), and Black Texture (BT) are standard. Available in other Bud textured finishes at no extra cost.
Economizer Racks with 19" Panel Width
Non-Ventilated Ventilated Panel
Space
PS Outside
Height
A Outside
Width
B Outside
Depth
C Clear
Inside
Depth
D Weight
(Lbs.)
Catalog Number Acce- ssories Drawings Catalog Number Acce- ssories Drawings
ER-16502 Acc. ER-16602 Acc. 42.00" 47.31" 22.00" 18.50" 17.00" 110
ER-16503 Acc. ER-16603 Acc. 52.50" 57.81" 22.00" 18.50" 17.00" 124
ER-16504 Acc. ER-16604 Acc. 61.25" 66.56" 22.00" 18.50" 17.00" 139
ER-16505 Acc. ER-16605 Acc. 70.00" 75.31" 22.00" 18.50" 17.00" 151
ER-16506 Acc. ER-16606 Acc. 78.75" 84.06" 22.00" 18.50" 17.00" 163
ER-16511 Acc. N/A N/A N/A 21.00" 25.31" 22.00" 25.50" 24.00" 94
ER-16512 Acc. ER-16612 Acc. 42.00" 47.31" 22.00" 25.50" 24.00" 128
ER-16513 Acc. ER-16613 Acc. 52.50" 57.81" 22.00" 25.50" 24.00" 145
ER-16514 Acc. ER-16614 Acc. 61.25" 66.56" 22.00" 25.50" 24.00" 162
ER-16515 Acc. ER-16615 Acc. 70.00" 75.31" 22.00" 25.50" 24.00" 175
ER-16516 Acc. ER-16616 Acc. 78.75" 84.06" 22.00" 25.50" 24.00" 189
ER-16521 Acc. N/A N/A N/A 21.00" 25.31" 22.00" 30.75" 29.25" 109
ER-16522 Acc. ER-16622 Acc. 42.00" 47.31" 22.00" 30.75" 29.25" 143
ER-16523 Acc. ER-16623 Acc. 52.50" 57.81" 22.00" 30.75" 29.25" 160
ER-16524 Acc. ER-16624 Acc. 61.25" 66.56" 22.00" 30.75" 29.25" 180
ER-16525 Acc. ER-16625 Acc. 70.00" 75.31" 22.00" 30.75" 29.25" 194
ER-16526 Acc. ER-16626 Acc. 78.75" 84.06" 22.00" 30.75" 29.25" 209
Economizer Racks with 24" Panel Width
Non-Ventilated Ventilated Panel
Space
PS Outside
Height
A Outside
Width
B Outside
Depth
C Clear
Inside
Depth
D Weight
(Lbs.)
Catalog Number Aces- ssories Drawings Catalog Number Aces- ssories Drawings
ER-16802 Acc. ER-16902 Acc. 42.00" 47.31" 27.00" 18.50" 17.00" 114
ER-16803 Acc. ER-16903 Acc. 52.50" 57.81" 27.00" 18.50" 17.00" 128
ER-16804 Acc. ER-16904 Acc. 61.25" 66.56" 27.00" 18.50" 17.00" 143
ER-16805 Acc. ER-16905 Acc. 70.00" 75.31" 27.00" 18.50" 17.00" 155
ER-16806 Acc. ER-16906 Acc. 78.75" 84.06" 27.00" 18.50" 17.00" 167
ER-16812 Acc. ER-16912 Acc. 42.00" 47.31" 27.00" 25.50" 24.00" 133
ER-16813 Acc. ER-16913 Acc. 52.50" 57.81" 27.00" 25.50" 24.00" 150
ER-16814 Acc. ER-16914 Acc. 61.25" 66.56" 27.00" 25.50" 24.00" 167
ER-16815 Acc. ER-16915 Acc. 70.00" 75.31" 27.00" 25.50" 24.00" 180
ER-16816 Acc. ER-16916 Acc. 78.75" 84.06" 27.00" 25.50" 24.00" 194
ER-16822 Acc. ER-16922 Acc. 42.00" 47.31" 27.00" 30.75" 29.25" 149
ER-16823 Acc. ER-16923 Acc. 52.50" 57.81" 27.00" 30.75" 29.25" 166
ER-16824 Acc. ER-16924 Acc. 61.25" 66.56" 27.00" 30.75" 29.25" 186
ER-16825 Acc. ER-16925 Acc. 70.00" 75.31" 27.00" 30.75" 29.25" 200
ER-16826 Acc. ER-16926 Acc. 78.75" 84.06" 27.00" 30.75" 29.25" 215
To order these products, contact
Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz
|
|
|
|
|
BUD 60 SERIES
|
04/25/2003 at 08:58AM by Randy
|
|
|
|
Large Cabinet Racks
Series 60
These cabinet racks are proof of what Bud designers have striven for and achieved: Quality enclosures that enhance the function, appearance, and value of your products. All Series 60 Cabinet Racks include welded frame, sides, top, and rear door.
Design Features
*All welded 14 gauge steel frame with "U" shaped 16 gauge steel panel mounting rail supports.
*Door, 20 gauge steel. Sides and top, 18 gauge steel.
*Adjustable front and rear panel mounting rails tapped #10-32 on E.I.A. universal spacing. (use #7346 screws - order separately)
*Accommodates 19" wide E.I.A. panels.
*Bottom pierced for RC-7758 casters. *1.109 inch diameter knockout holes in base. *1200# equipment load capacity.
Bonus Features
*Interiors are accessible from front and rear for easy installation and maintenance of components.
*One door furnished. May be used on front or rear.
*Add-A-Rack System used to combine two or more enclosures into one integral system.
*Shipped completely assembled.
Finishes
Grey Texture (GT), Royal Blue Texture (BT). Available in other Bud textured finishes at no extra cost.
SERIES 60 Cabinet Rack (19" Panel Width)
Catalog No. Acce- ssories
Drawings Panel Space
(PS) Outside Height
(A) Outside Width
(B) Outside Depth
(C) Clear Inside Depth
(D) Weight
(Lbs.)
60-2300 Acc. 21.00" 29.62" 24.06" 22.00" 20.50" 112
60-2301 Acc. 31.50" 40.12" 24.06" 22.00" 20.50" 137
60-2302 Acc. 42.00" 50.62" 24.06" 22.00" 20.50" 162
60-2303 Acc. 52.50" 61.12" 24.06" 22.00" 20.50" 189
60-2304 Acc. 61.25" 69.87" 24.06" 22.00" 20.50" 215
60-2305 Acc. 70.00" 78.62" 24.06" 22.00" 20.50" 227
60-2306 Acc. 78.75" 87.37" 24.06" 22.00" 20.50" 244
60-2307 Acc. 21.00" 29.62" 24.06" 25.50" 24.00" 123
60-2308 Acc. 31.50" 40.12" 24.06" 25.50" 24.00" 145
60-2309 Acc. 42.00" 50.62" 24.06" 25.50" 24.00" 170
60-2310 Acc. 52.50" 61.12" 24.06" 25.50" 24.00" 202
60-2311 Acc. 61.25" 69.87" 24.06" 25.50" 24.00" 216
60-2312 Acc. 70.00" 78.62" 24.06" 25.50" 24.00" 231
60-2313 Acc. 78.75" 87.37" 24.06" 25.50" 24.00" 263
30-2300 Acc. 21.00" 29.62" 24.06" 30.75" 29.25" 154
30-2301 Acc. 31.50" 40.12" 24.06" 30.75" 29.25" 174
30-2302 Acc. 42.00" 50.62" 24.06" 30.75" 29.25" 202
30-2303 Acc. 52.50" 61.12" 24.06" 30.75" 29.25" 225
30-2304 Acc. 61.25" 69.87" 24.06" 30.75" 29.25" 245
30-2305 Acc. 70.00" 78.62" 24.06" 30.75" 29.25" 268
30-2306 Acc. 78.75" 87.37" 24.06" 30.75" 29.25" 294
To order these products, contact
Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz
|
|
|
|
|
BUD LARGE CABINET RACKS
|
04/25/2003 at 08:55AM by Randy
|
|
|
|
LARGE CABINET RACKS
DESIGNER SERIES BY SIZE
Designer Series
Economizer Series 60 Series 2000
Classic II LPR Series
Application Series
Co-Location Distribution LX-4600
LX-4700 Seismic Turnkey Cabinet Assy
Server 19"/23" Equipment UL/NEMA 12
To order these products, contact
Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz
|
|
|
|
|
BUD NEMA 4 PLASTIC BOXES
|
04/25/2003 at 08:52AM by Randy
|
|
|
|
Plastic Boxes
NEMA 4x
These Polycarbonate and high-impact ABS molded enclosures meet NEMA 4X specifications and are ideal for PCB enclosures, junction boxes and other applications in the electrical and electronic industries. Available in a variety of sizes, these molded enclosures are offered in three different versions.
Style 1 - Light gray polycarbonate body and cover. Body/Cover - UV stabilized , UL94V-2 flammability rating, suggested service temperature -40C to 120C
Style 2 - Light gray polycarbonate body and clear polycarbonate cover. Body/Cover - UB stabilized UL94V-2 flammability rating suggested service temperature -40C to 120C
Style 3 - Dark gray ABS body and cover. Body/Cover - UL94-HB flammability rating, suggested service temperature -40C to 80C
Design Features
*Designed to IP65 of IEC 529 and NEMA 4X specifications
*Wall mounting holes and cover attaching screws are outside the sealing area thus preventing ingress of moisture and dust.
*Most models have internal guid slots for mounting PCB assemblies vertically.
*Internal bosses allow mounting of PCBs horizontally or for connection of terminals etc, into threaded brass inserts (except PN-1320 and PN-1330)
*Cover screws are M-4 stainless steel, non-magnetic and fasten into threaded brass inserts.
*Gasket Material: EPDM
*PN-Series Boxes feature a smooth, flat top cover. See PNR-Series for recessed top cover.
NEMA 4X - PN Series
Catalog Numbers External Dimensions Internal Dimensions Wgt.
Style 1 Drawings Style 2 Drawings Style 3 Drawings A B C D E F G H Ozs.
PN-1320 PN-1320-C PN-1320-DG 2.56" 2.28" 1.38" .99" 2.28" 2.04" 1.18" .89" 2.5
PN-1321 PN-1321-C PN-1321-DG 4.53" 2.56" 1.57" .99" 4.16" 2.19" 1.37" .89" 4.0
PN-1322 PN-1322-C PN-1322-DG 4.53" 2.56" 2.17" 1.58" 4.16" 2.19" 1.97" 1.48" 5.0
PN-1323 PN-1323-C PN-1323-DG 4.53" 3.54" 2.17" 1.58" 4.16" 3.18" 1.93" 1.46" 5.5
PN-1324 PN-1324-C PN-1324-DG 6.73" 4.76" 2.17" 1.58" 6.37" 4.40" 1.93" 1.46" 10.0
PN-1325 PN-1325-C PN-1325-DG 8.74" 5.75" 2.17" 1.58" 8.37" 5.39" 1.93" 1.46" 15.5
PN-1326 PN-1326-C PN-1326-DG 7.68" 3.15" 2.17" 1.78" 7.40" 2.87" 1.93" 1.66" 7.4
PN-1327 PN-1327-C PN-1327-DG 6.73" 4.76" 3.15" 1.58" 6.37" 4.40" 2.92" 1.46" 13.0
PN-1328 PN-1328-C PN-1328-DG 4.53" 3.54" 3.15" 2.56" 4.29" 3.30" 2.92" 2.44" 7.2
PN-1329 PN-1329-C PN-1329-DG 8.74" 5.75" 2.95" 1.58" 8.37" 5.39" 2.71" 1.46" 18.6
PN-1330 PN-1330-C PN-1330-DG 2.05" 1.97" 1.38" .99" 1.82" 1.74" 1.19" .89" 1.4
PN-1331 PN-1331-C PN-1331-DG 3.23" 3.15" 2.17" 1.58" 2.99" 2.91" 1.89" 1.42" 4.3
PN-1332 PN-1332-C PN-1332-DG 6.30" 3.15" 2.17" 1.58" 6.06" 2.91" 1.89" 1.42" 6.8
PN-1333 PN-1333-C PN-1333-DG 6.30" 3.15" 3.35" 2.76" 6.06" 2.91" 3.08" 2.60" 9.8
PN-1334 PN-1334-C PN-1334-DG 7.87" 4.72" 2.95" 2.37" 7.61" 4.46" 2.68" 2.21" 14.4
PN-1335 PN-1335-C PN-1335-DG 10.43" 7.28" 3.74" 2.95" 10.17" 7.02" 3.49" 2.82" 28.0
PN-1336 PN-1336-C PN-1336-DG 4.72" 4.72" 2.36" 1.18" 4.48" 4.48" 2.12" 1.06" 7.7
PN-1337 PN-1337-C PN-1337-DG 4.72" 4.72" 3.54" 2.36" 4.48" 4.48" 3.31" 2.24" 9.8
PN-1338 PN-1338-C PN-1338-DG 6.30" 6.30" 2.36" 1.18" 6.06" 6.06" 2.12" 1.06" 11.5
PN-1339 PN-1339-C PN-1339-DG 6.30" 6.30" 3.54" 2.36" 6.06" 6.06" 3.31" 2.24" 13.6
PN-1340 PN-1340-C PN-1340-DG 9.45" 6.30" 3.54" 3.01" 9.17" 6.02" 3.26" 2.81" 22.0
PN-1341 PN-1341-C PN-1341-DG 9.45" 6.30" 4.72" 3.01" 9.17" 6.02" 4.44" 2.81" 27.4
PN-1342 PN-1342-C PN-1342-DG 11.81" 9.06" 3.39" 2.22" 11.57" 8.82" 3.11" 2.04" 31.0
PN-1343 PN-1343-C PN-1343-DG 11.81" 9.06" 4.37" 2.22" 11.57" 8.82" 4.09" 2.04" 34.0
PN-1344 PN-1344-C PN-1344-DG 14.17" 7.87" 5.91" 3.94" 13.85" 7.56" 5.63" 3.62" 49.0
To order these products, contact
Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz
|
|
|
|
|
BUD ALUMINUM CHASSIS AND BOTTOM PLATES
|
04/25/2003 at 08:46AM by Randy
|
|
|
|
Chassis
Aluminum Chassis
Design Features
From bud, the widest selection of aluminum chassis in the industry: 45 sizes. Each is welded at stress points for assured, maximum strength and rigidity. Sides folded in at bottom for additional support. Bottom plate easily detachable. Natural Finish
Click on Image for Larger View
Catalog Number Drawings Width Length Height Gauge Weight lbs.
AC-1402# 3.5" 4.5" 1" .040 1/8
AC-1404 4" 5" 2" .040 .25
AC-1405 4" 6" 1.5" .040 .25
AC-430 4" 6" 3" .040 1/3
AC-431 4" 6" 2" .040 .25
AC-1407 4.5" 8" 1.5" .040 .25
AC-402 5" 7" 2" .040 1/3
AC-429 55" 7" 3" .040 .5
AC-403 5" 9.5" 2" .040 .5
AC-401 5" 9.5" 2.5" .040 .5
AC-421 5" 9.5" 3" .040 5/8
AC-404 5" 10" 3" .040 5/8
AC-1413 6" 8" 2" .040 1/3
AC-1414 6" 14" 3" .050 1/8
AC-433 6" 17" 3" .050 1.25
AC-405 7" 7" 2" .040 .5
AC-406 7" 9" 2" .040 .5
AC-407 7" 11" 2" .040 5/8
AC-408 7" 12" 3" .040 7/8
AC-409 7" 13" 2" .040 .75
AC-411 7" 15" 3" .050 1.25
AC-1416 7" 17" 2" .050 1-1/8
AC-423 7" 17" 3" .050 1.5
AC-1418 8" 10" 2.5" .040 1
AC-1419 8" 12" 2.5" .050 1-1/8
AC-424 8" 12" 3" .050 1.25
AC-412* 8" 17" 3" .050 1.75
AC-1421 9" 15" 3" .050 1.5
AC-413 10" 12" 3" .050 1.25
AC-414 10" 14" 3" .050 1.5
AC-415* 10" 17" 2" .050 1.5
AC-416* 10" 17" 3" .050 1.75
AC-427* 10" 17" 4" .050 2.5
AC-1422 10" 17" 5" .050 2.25
AC-1424 12" 12" 3" .050 1.25
AC-418* 12" 17" 3" .050 2.25
AC-419* 13" 17" 2" .050 2-5/8
AC-420* 13" 17" 3" .050 2.75
AC-428* 13" 17" 4" .050 3.25
AC-1426 13" 17" 5" .050 3.5
AC-1427 14" 17" 3" .050 2.75
AC-1428 15" 17" 4" .050 3.25
AC-1429 15" 17" 6" .050 4-18
AC-1430 17" 17" 3" .050 3.25
AC-1431 17" 17" 4" .050 3-7/8
* Holes for chassis mounting brackets provided.
# Not welded.
Chassis
Chassis Bottom Plates
Design Features
Fits all chassis sizes. Used to protect wiring or components, or as dust covers on underside of chassis. Design Features: .040" thick aluminum Finish: Natural Finish
Catalog Number Drawings Fits Width Chassis Length Weight ozs
BPA-1502 3.5" 4.5" 1
BPA-1504 4" 5" 2
BPA-1505 4" 6" 2
BPA-1507 4.5" 8" 3
BPA-1589 5" 7" 2
BPA-1590 5" 9.5" 2
BPA-1591 5" 10" 4
BPA-1513 6" 8" 3
BPA-1514 6" 14" 5
BPA-1515 6" 17" 6
BPA-1592 7" 7" 3
BPA-1593 7" 9" 4
BPA-1594 7" 11" 4
BPA-1595 7" 12" 5
BPA-1596 7" 13" 8
BPA-1516 7" 15" 8
BPA-1517 7" 17" 8
BPA-1518 8" 10" 4
BPA-1519 8" 12" 6
BPA-1520 8" 17" 8
BPA-1522 9" 15" 8
BPA-1523 10" 12" 8
BPA-1524 10" 14" 8
BPA-1597 10" 17" 10
BPA-1527 12" 12" 10
BPA-1528 12" 17" 12
BPA-1598 13" 17" 14
BPA-1529 14" 17" 15
BPA-1530 15" 17" 16
BPA-1531 17" 17" 17
To order these products, contact
Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz
|
|
|
|
|
BUD UTILITY CABINETS
|
04/25/2003 at 08:42AM by Randy
|
|
|
|
Bud can meet your special requirements by customizing any of our standard enclosures by punching, drilling, painting
Design Features
Available in 20 gauge steel or .040" aluminum. Sturdy, all-welded body.
Bonus Features
Economical cabinets have removable front and back panels..
Finishes
CU Prefix: Steel Metallic Gray (SG) AU Prefix: Aluminum alloy in natural or Metallic Gray (MG) If no suffix is specified, natural finish will be supplied in utility cabinets.
Utility Cabinets
Catalog Number Drawings Height Width Depth Weight Lbs
CU-883 4.00" 4.00" 2.00" .75
CU-728 4.00" 5.00" 3.00" 1.00
CU-729 5.00" 6.00" 4.00" 1.75
CU-1098 6.00" 6.00" 6.00" 2.25
CU-1099 9.00" 6.00" 5.00" 3.00
CU-879 10.00" 8.00" 7.00" 3.25
CU-880 10.00" 10.00" 8.00" 6.25
CU-1124 12.00" 7.00" 6.00" 5.00
CU-881 12.00" 11.00" 8.00" 8.50
CU-882 15.00" 9.00" 7.00" 8.25
AU-1083 4.00" 4.00" 2.00" .25
AU-1028 4.00" 5.00" 3.00" .50
AU-1029 5.00" 6.00" 4.00" .75
AU-1039 6.00" 6.00" 6.00" 1.00
AU-1040 9.00" 6.00" 5.00" 1.50
To order these products, contact
Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz
|
|
|
|
|
BUD MINI BOXES
|
04/25/2003 at 08:33AM by Randy
|
|
|
|
Design Features
.040" aluminum alloy. Two sections slip together and may be joined by either built in snap lock or sheet metal screws (included).
Bonus Features
Flanged sections assure proper shielding. Units can be used as separate housings or as part of larger assemblies.
Finishes
Natural (A) Smooth Gray (B)
Mini Boxes
(Smooth Gray) Cat. No. (Natural) Cat. No. Drawings L W H Wgt. Lbs.
CU-2100B CU-3000A 2.75" 2.12" 1.62" .25
CU-2101B CU-3001A 3.25" 2.12" 1.62" .25
CU-2102B CU-3002A 4.00" 2.12" 1.62" .25
CU-2103B CU-3003A 4.00" 2.25" 2.25" .25
CU-2104B CU-3004A 5.00" 2.25" 2.25" .25
CU-2105B CU-3005A 5.00" 4.00" 3.00" .50
CU-2106B CU-3006A 5.25" 3.00" 2.12" .25
CU-2107B CU-3007A 6.00" 5.00" 4.00" .75
CU-2108B CU-3008A 7.00" 5.00" 3.00" .75
CU-2109B CU-3009A 8.00" 6.00" 3.50" 1.00
CU-2110B CU-3010A 10.00" 6.00" 3.50" 1.25
CU-2111B CU-3011A 12.00" 7.00" 4.00" 1.75
To order these products, contact
Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz.
|
|
|
|
|
BUD ECONOBOXES
|
04/25/2003 at 08:29AM by Randy
|
|
|
|
Design Features
Bud offers fifteen box sizes, each with a close fitting flanged cover fastened to bosses in the body with screws. This plus the thickness of the #ADC-10 aluminum alloy, offers excellent screening properties. These lightweight, easy to machine enclosures have a number of uses: instrument and meter cases, filter networks, junction bosses, switching and many other applications requiring a small box. In addition, they're ideal for concealed or other interior use where a safety closure is necessary.
Available in both natural finish and gray painted finish
(add -G suffix to part number for gray paint)
CU-123
CU-124
CU-234
CU-247
CU-347
To order these products, contact
Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz.
|
|
|
|
|
BUD DIECAST NEMA 4 BOXES
|
04/25/2003 at 08:25AM by Randy
|
|
|
|
Die cast in aluminum alloy and resistant to atmospheric and marine corrosion, these encloures are ideal for housing sensitive electronic assemblies and pneumatic, hydraulic and electrical devices in both commercial and industrial environments.
Design Features
*Designed to IP65 of IEC529 and NEMA 4 specifications
*Wallmounting holes (on Style A) and cover attaching screws are outside the sealing area thus preventing ingres of moisture and dust (Style B does not have wallmounting holes)
*Cover incorporates a recessed gasket
*Most models have internal guide slots for mounting PCB assemblies vertically.
*Cover mounting holes are roll threaded and screws are captive and recessed
Bonus Features
*Body & Cover: Aluminum Alloy #ADC-10
*Gasket: EDPM
Cover Screws: M4 Stainless Steel, non-magnetic
Ground Screw & Washer: M3.5 nickle-plated
Finishes
Natural Finish or Gray (add suffix G)
AN-1300
AN-1301
AN-1302
AN-1303
AN-1304
AN-1305
AN-1306
AN-1307
To order these products, contact
Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz.
|
|
|
|
|
WAKEFIELD HEAT SINK COMPOUND
|
04/25/2003 at 08:07AM by Randy
|
|
|
|
Wakefield provides cost-effective single source solutions for heat dissipation components and a wide variety of thermally efficient interface materials and compounds. Accessory products are designed for efficient thermal transfer, ease of use, and quick attachment. Included are thermal joint compounds; filled epoxy systems; thermally conductive adhesives, washers, and pads; as well as clips and fans.
120-2 2oz.
120-8 8oz.
To order these products, contact
Industrial Electronics By Ross LLC
414-327-1555
www.industrialelectronics.biz.
|
|
|
|
|
