Fax : 414-327-0577
Email: indelect@execpc.com
Catalog, Quote, Availability.
Accessories
|
Call: 414-327-1555 Fax : 414-327-0577 Email: indelect@execpc.com Catalog, Quote, Availability. |
Accessories |
|
| Fuke Model Name | Fluke Current Clamp Multimeter Accessories Description |
| 80i-110s AC/DC Current Clamp |  The 80i-110s is compatible with any Fluke ScopeMeter Test Tool, Power Harmonics Analyzer, Oscilloscope, Multimeter, or other voltage measurement device that has the following features: BNC input connectors or if using a meter convert the banana plugs to a BNC connector using the adapter PM9081/001. More Info... |
| 80i-400 AC Current Clamp |  The model 80i-400 is a clamp-on ac current probe designed to extend the current measuring capability of an ac current meter to 400 amperes. The clamp is compatible with a DMM that accepts 4mm-shrouded banana plugs and has an AC milliamp range. The division ratio is 1000:1. More Info... |
| 80i-500s AC Current Clamp |  Current clamp for capturing current waveforms with Fluke ScopeMeter test tools, Fluke Power Quality Analyzer and Scopes. Enhanced safety by using double or reinforced insulation for probe jaws, handle, output cable and BNC connector (rated to 600Vrms). More Info... |
| 80i-600A AC Current Clamp |  Measures ac current from 1A to 600A. Output to meter is 1mA/Amp ac. (Division ratio is 1000 to 1.) Maximum conductor size 2" (50 mm) in diameter. New straight, safety-shrouded plugs. Accuracy: ¤2%, 50 Hz to 1 kHz, ¤3% (typical) 30 Hz to 50 Hz or 1 kHz to 10 kHz. (Factory Mutual Approved)More Info... |
| 90i-610s AC/DC Current Clamp |  The 90i-610s is compatible with any Fluke ScopeMeter Test Tool, Power Harmonics Analyzer, Oscilloscope ,Multimeter, or other voltage measurement device that has the following features: BNC input connectors or if using a meter a BNC to banana plug adapter PM9081/001 (included) lets you use this probe with your DMM. More Info... |
| CS20MA Current Shunt | The CS20MA Current Shunt in intended for use with any of the Scopemeter test tools for ac and dc measurements on 4-20 mA Process Control Loops. More Info... |
| i1000s Current Clamp |  The Fluke model i1000s is a portable 1000 Arms oscilloscope probe intended for use in industrial and power environments. The unit permits analysis and measurement of current waveforms and harmonics. Millivolt output proportional to current magnitude allows for direct display of the waveform on an oscilloscope via a coaxial cable terminated with an insulated BNC connector. More Info... |
| i1010 AC/DC Current Clamp |  The i1010 AC/DC Current Clamp allows multimeters to measure up to 600A AC or 1000A DC.More Info... |
| i1010-KIT AC/DC Current Clamp and Carry Case Kit |  Special value kit for electrical professional who is looking to add on DC and AC current measurement capabilities to their DMM. Includes a roomy carry case to hold and protect your meter and current clamp, plus extra storage for your test leads, probes and manuals. Included with kit: More Info... |
| i200 AC Current Clamp |  Small sized, convenient-to-use current clampThe i200 is a single range 200A ac current clamp with current output via safety shrouded banana plugs. The i200 is compatible with any Fluke multimeter or any other current measurement device that accepts shrouded banana plugs and has a milliamp range. More Info... |
| i2000flex AC Current Clamp |  For current measurement on large and difficult to reach conductorsThe i2000flex is a flexible ac current probe for oscilloscopes and digital multimeters recommended for current measurement on large and difficult to reach conductors or grouped cables.
More Info... |
| i200S AC Current Clamp |  Small sized, convenient-to-use current clampThe i200s is a dual range 20A and 200A ac current clamp with voltage output via a safety insulated BNC connector. A dual banana to BNC adapter is supplied to allow the i200s to be connected to multimeters with banana inputs. More Info... |
| i3000s AC Current Clamp |  Current measurements on large conductorsThe i3000s AC current probe works with oscilloscopes and digital multimeters. The included dual banana to BNC adapter PM9081/001 allows for the clamp to interface with digital multimeters. The clamp is optimized for measurement on power distribution systems. The i3000s is compatible with Fluke Scopemeter test tool, Power Harmonic Analyzer, and Oscilloscopes.More Info... |
| i410 AC/DC Current Clamp |  The i410 AC/DC Current Clamp allows multimetersto measure up to 400A AC or DC. More Info... |
| i410-KIT AC/DC Current Clamp and Carry Case Kit |  Special value kit for electrical professional who is looking to add on DC and AC current measurement capabilities to their DMM. Includes a roomy carry case to hold and protect your meter and current clamp, plus extra storage for your test leads, probes and manuals. Included with kit: More Info... |
| CS20MA Current shunt 4-20mA | More Info... |
|
© 2007 Fluke Current Clamp and Power Probe Accessories by Industrial Electronics By Ross LLC | ||
Fluke Digital Multimeters
|
Fluke Clamp Multimeters
|
Fluke Graphical Multimeters
|
|
Fluke Accessories
|
Fluke Application Note 1
|
Fluke Application Note 2
|
|
HOME PAGE
|
Fluke Application Note 3
|
Fluke Application Note 4
|
|
Fluke MENU
|
||
|
Call: 414-327-1555 Fax : 414-327-0577 Email: indelect@execpc.com Catalog, Quote, Availability. |